Quantum-dot thermometry

We present a method for the measurement of a temperature differential across a single quantum dot that has transmission resonances that are separated in energy by much more than the thermal energy. We determine numerically that the method is accurate to within a few percent across a wide range of parameters. The proposed method measures the temperature of the electrons that enter the quantum dot and will be useful in experiments that aim to test theory which predicts quantum dots are highly-efficient thermoelectrics.Comment: 3 pages, 4 Figure

Rubber friction on (apparently) smooth lubricated surfaces

We study rubber sliding friction on hard lubricated surfaces. We show that even if the hard surface appears smooth to the naked eye, it may exhibit short wavelength roughness, which may give the dominant contribution to rubber friction. That is, the observed sliding friction is mainly due to the viscoelastic deformations of the rubber by the substrate surface asperities. The presented results are of great importance for rubber sealing and other rubber applications involving (apparently) smooth surfaces.Comment: 7 pages, 15 figure

Enhancement of noncontact friction between closely spaced bodies by two-dimensional systems

. We consider the effect of an external bias voltage and the spatial variation of the surface potential, on the damping of cantilever vibrations. The electrostatic friction is due to energy losses in the sample created by the electromagnetic field from the oscillating charges induced on the surface of the tip by the bias voltage and spatial variation of the surface potential. A similar effect arises when the tip is oscillating in the electrostatic field created by charged defects in a dielectric substrate. The electrostatic friction is compared with the van der Waals friction originating from the fluctuating electromagnetic field due to quantum and thermal fluctuation of the current density inside the bodies. We show that the electrostatic and van der Waals friction can be greatly enhanced if on the surfaces of the sample and the tip there are two-dimension (2D) systems, e.g. a 2D-electron system or incommensurate layers of adsorbed ions exhibiting acoustic vibrations. We show that the damping of the cantilever vibrations due to the electrostatic friction may be of similar magnitude as the damping observed in recent experiments of Stipe \textit{et al} [B.C.Stipe, H.J.Mamin, T.D.Stowe, T.W.Kenny, and D.Rugar, Phys.Rev. Lett.% \textbf{87}, 0982001]. We also show that at short separation the van der Waals friction may be large enough to be measured experimentally.Comment: 11 pages, 2 figure

Theory of friction: contribution from fluctuating electromagnetic field

We calculate the friction force between two semi-infinite solids in relative parallel motion (velocity $V$), and separated by a vacuum gap of width $d$. The friction force result from coupling via a fluctuating electromagnetic field, and can be considered as the dissipative part of the van der Waals interaction. We consider the dependence of the friction force on the temperature $T$, and present a detailed discussion of the limiting cases of small and large $V$ and $d$.Comment: 15 pages, No figure

Numerical Investigation of Second Mode Attenuation over Carbon/Carbon Surfaces on a Sharp Slender Cone

We have carried out axisymmetric numerical simulations of a spatially developing hypersonic boundary layer over a sharp 7$^{\circ{}}$-half-angle cone at $M_\infty=7.5$ inspired by the experimental investigations by Wagner (2015). Simulations are first performed with impermeable (or solid) walls with a one-time broadband pulse excitation applied upstream to determine the most convectively-amplified frequencies resulting in the range 260kHz -- 400kHz, consistent with experimental observations of second-mode instability waves. Subsequently, we introduce harmonic disturbances via continuous periodic suction and blowing at 270kHz and 350kHz. For each of these forcing frequencies complex impedance boundary conditions (IBC), modeling the acoustic response of two different carbon/carbon (C/C) ultrasonically absorptive porous surfaces, are applied at the wall. The IBCs are derived as an output of a pore-scale aeroacoustic analysis -- the inverse Helmholtz Solver (iHS) -- which is able to return the broadband real and imaginary components of the surface-averaged impedance. The introduction of the IBCs in all cases leads to a significant attenuation of the harmonically-forced second-mode wave. In particular, we observe a higher attenuation rate of the introduced waves with frequency of 350kHz in comparison with 270kHz, and, along with the iHS impedance results, we establish that the C/C surfaces absorb acoustic energy more effectively at higher frequencies.Comment: AIAA-SciTech 201

What is the influence on water quality in temperate eutrophic lakes of a reduction of planktivorous and benthivorous fish? A systematic review protocol

Background: In lakes that have become eutrophic due to sewage discharges or nutrient runoff from land, problems such as algal blooms and oxygen deficiency often persist even when nutrient supplies have been reduced. One reason is that phosphorus stored in the sediments can exchange with the water. There are indications that the high abundance of phytoplankton, turbid water and lack of submerged vegetation seen in many eutrophic lakes may represent a semi-stable state. For that reason, a shift back to more natural clear-water conditions could be difficult to achieve. In some cases, though, temporary mitigation of eutrophication-related problems has been accomplished through biomanipulation: stocks of zooplanktivorous fish have been reduced by intensive fishing, leading to increased populations of phytoplankton-feeding zooplankton. Moreover, reduction of benthivorous fish may result in lower phosphorus fluxes from the sediments. An alternative to reducing the dominance of planktivores and benthivores by fishing is to stock lakes with piscivorous fish. These two approaches have often been used in combination. The implementation of the EU Water Framework Directive has recently led to more stringent demands for measures against eutrophication, and a systematic review could clarify whether biomanipulation is efficient as a measure of that kind. Methods: The review will examine primary field studies of how large-scale biomanipulation has affected water quality and community structure in eutrophic lakes or reservoirs in temperate regions. Such studies can be based on comparison between conditions before and after manipulation, on comparison between treated and non-treated water bodies, or both. Relevant outcomes include Secchi depth, concentrations of oxygen, nutrients, suspended solids and chlorophyll, abundance and composition of phytoplankton, zooplankton and fish, and coverage of submerged macrophytes.A Systematic review to this article was published on 22 May 2015: ernes, C., Carpenter, S.R., Gårdmark, A. et al. What is the influence of a reduction of planktivorous and benthivorous fish on water quality in temperate eutrophic lakes? A systematic review. Environ Evid 4, 7 (2015). DOI: 10.1186/s13750-015-0032-9Mistr

Fluid flow at the interface between elastic solids with randomly rough surfaces

I study fluid flow at the interface between elastic solids with randomly rough surfaces. I use the contact mechanics model of Persson to take into account the elastic interaction between the solid walls and the Bruggeman effective medium theory to account for the influence of the disorder on the fluid flow. I calculate the flow tensor which determines the pressure flow factor and, e.g., the leak-rate of static seals. I show how the perturbation treatment of Tripp can be extended to arbitrary order in the ratio between the root-mean-square roughness amplitude and the average interfacial surface separation. I introduce a matrix D(Zeta), determined by the surface roughness power spectrum, which can be used to describe the anisotropy of the surface at any magnification Zeta. I present results for the asymmetry factor Gamma(Zeta) (generalized Peklenik number) for grinded steel and sandblasted PMMA surfaces.Comment: 16 pages, 14 figure

Factors influencing condom use among Nigerian undergraduates: A mixed method study

Objective: This study’s objective was to explore and assess the factors influencing condom use among Nigerian undergraduates within the age group 16-34 years.Setting: The University of Lagos, a federal University in the commercial capital of Nigeria.Study design: Both qualitative (focus group discussions) and quantitative (cross-sectional survey) methods were utilised for this study.Subjects: A total of 101 subjects were recruited with age range 18 to 34 years as against 100 years, with a mean age of 21 years. Data collection was conducted in July and August 2011 at the University of Lagos.Subjects: A total of 820 students from University of Lagos in four faculties participated in the cross-sectional survey, and we organised four focus group discussions with six students each.Results: Students were of the perception that various socio-economic and environmental factors influenced condom use during sexual intercourse. Factors identified as having great influence on condom use include: “adequate sex education” and “unplanned/ unanticipated sexual intercourse”. Conversely, the influence of alcohol/social drugs on condom use was ranked low.Conclusion: The study showed that students had the perception that various factors influenced condom use but these perceptions varied between young men and women. It may therefore be rewarding to have customised messages based on specific needs when reaching out to different groups stratified based on gender.Keywords: Condom, unsafe sex, HIV, gender, undergraduates

Domino: exploring mobile collaborative software adaptation

Social Proximity Applications (SPAs) are a promising new area for ubicomp software that exploits the everyday changes in the proximity of mobile users. While a number of applications facilitate simple file sharing between co–present users, this paper explores opportunities for recommending and sharing software between users. We describe an architecture that allows the recommendation of new system components from systems with similar histories of use. Software components and usage histories are exchanged between mobile users who are in proximity with each other. We apply this architecture in a mobile strategy game in which players adapt and upgrade their game using components from other players, progressing through the game through sharing tools and history. More broadly, we discuss the general application of this technique as well as the security and privacy challenges to such an approach

Adsorbate induced enhancement of electrostatic non-contact friction

We study the non-contact friction between an atomic force microscope tip and a metal substrate in the presence of bias voltage. The friction is due to energy losses in the sample created by the electromagnetic field from the oscillating charges induced on the tip surface by the bias voltage. We show that the friction can be enhanced by many orders of magnitude if the ads orbate layer can support acoustic vibrations. The theory predicts the magnitude and the distance dependence of friction in a good agreement with recent puzzling non-contact friction experiment \cite{Stipe}. We demonstrate that even an isolated adsorbate can produce high enough friction to be measured experimentally.Comment: Published in PR