Post-Retained Single Crowns versus Fixed Dental Prostheses: A 7-Year Prospective Clinical Study

Biomechanical integrity of endodontically treated teeth (ETT) is often compromised. Degree of hard tissue loss and type of final prosthetic restoration should be carefully considered when making a treatment plan. The objective of this prospective clinical trial was to assess the influence of the type of prosthetic restoration as well as the degree of hard tissue loss on 7-y clinical performance of ETT restored with fiber posts. Two groups (n = 60) were defined depending on the type of prosthetic restoration needed: 1) single unit porcelain-fused-to-metal (PFM) crowns (SCs) and 2) 3- to 4-unit PFM fixed dental prostheses (FDPs), with 1 healthy and 1 endodontically treated and fiber post-restored abutment. Within each group, samples were divided into 2 subgroups (n = 30) according to the amount of residual coronal tissues after abutment buildup and final preparation: A) >50% of coronal residual structure or B) equal to or <50% of coronal residual structure. The clinical outcome was assessed based on clinical and intraoral radiographic examinations at the recalls after 6, 12, 24, 36, 48, and 84 mo. Data were analyzed by Kaplan-Meier log-rank test and Cox regression analysis (P < 0.05). The overall 7-y survival rate of ETT restored with fiber post and either SCs or FDPs was 69.2%. The highest 84-mo survival rate was recorded in group 1A (90%), whereas teeth in group 2B exhibited the lowest performance (56.7% survival rate). The log-rank test detected statistically significant differences in survival rates among the groups (P = 0.048). Cox regression analysis revealed that the amount of residual coronal structure (P = 0.041; hazard ratio [HR], 2.026; 95% confidence interval [CI] for HR, 1.031–3.982) and the interaction between the type of prosthetic restoration and the amount of residual coronal structure (P = 0.024; HR, 1.372; 95% CI for HR, 1.042–1.806) were statistically significant factors for survival (ClinicalTrials.gov NCT01532947)

Acceptance of technology-enhanced learning for a theoretical radiological science course: a randomized controlled trial

<p>Abstract</p> <p>Background</p> <p>Technology-enhanced learning (TEL) gives a view to improved education. However, there is a need to clarify how TEL can be used effectively. The study compared students' attitudes and opinions towards a traditional face-to-face course on theoretical radiological science and a TEL course where students could combine face-to-face lectures and e-learning modules at their best convenience.</p> <p>Methods</p> <p>42 third-year dental students were randomly assigned to the traditional face-to-face group and the TEL group. Both groups completed questionnaires before the beginning and after completion of the course on attitudes and opinions towards a traditional face-to-face lectures and technology-enhanced learning. After completion of the course both groups also filled in the validated German-language TRIL (Trierer Inventar zur Lehrevaluation) questionnaire for the evaluation of courses given at universities.</p> <p>Results</p> <p>Both groups had a positive attitude towards e-learning that did not change over time. The TEL group attended significantly less face-to-face lectures than the traditional group. However, both groups stated that face-to-face lectures were the basis for education in a theoretical radiological science course.</p> <p>The members of the TEL group rated e-mail reminders significantly more important when they filled in the questionnaire on attitudes and opinions towards a traditional face-to-face lectures and technology-enhanced learning for the second time after completion of the course.</p> <p>The members of the technology-enhanced learning group were significantly less confident in passing the exam compared to the members of the traditional group. However, examination results did not differ significantly for traditional and the TEL group.</p> <p>Conclusions</p> <p>It seems that technology-enhanced learning in a theoretical radiological science course has the potential to reduce the need for face-to-face lectures. At the same time examination results are not impaired. However, technology-enhanced learning cannot completely replace traditional face-to-face lectures, because students indicate that they consider traditional teaching as the basis of their education.</p

N-Terminal Arginines Modulate Plasma-Membrane Localization of Kv7.1/KCNE1 Channel Complexes

BACKGROUND AND OBJECTIVE: The slow delayed rectifier current (I(Ks)) is important for cardiac action potential termination. The underlying channel is composed of Kv7.1 α-subunits and KCNE1 β-subunits. While most evidence suggests a role of KCNE1 transmembrane domain and C-terminus for the interaction, the N-terminal KCNE1 polymorphism 38G is associated with reduced I(Ks) and atrial fibrillation (a human arrhythmia). Structure-function relationship of the KCNE1 N-terminus for I(Ks) modulation is poorly understood and was subject of this study. METHODS: We studied N-terminal KCNE1 constructs disrupting structurally important positively charged amino-acids (arginines) at positions 32, 33, 36 as well as KCNE1 constructs that modify position 38 including an N-terminal truncation mutation. Experimental procedures included molecular cloning, patch-clamp recording, protein biochemistry, real-time-PCR and confocal microscopy. RESULTS: All KCNE1 constructs physically interacted with Kv7.1. I(Ks) resulting from co-expression of Kv7.1 with non-atrial fibrillation '38S' was greater than with any other construct. Ionic currents resulting from co-transfection of a KCNE1 mutant with arginine substitutions ('38G-3xA') were comparable to currents evoked from cells transfected with an N-terminally truncated KCNE1-construct ('Δ1-38'). Western-blots from plasma-membrane preparations and confocal images consistently showed a greater amount of Kv7.1 protein at the plasma-membrane in cells co-transfected with the non-atrial fibrillation KCNE1-38S than with any other construct. CONCLUSIONS: The results of our study indicate that N-terminal arginines in positions 32, 33, 36 of KCNE1 are important for reconstitution of I(Ks). Furthermore, our results hint towards a role of these N-terminal amino-acids in membrane representation of the delayed rectifier channel complex

A survey of failed post-retained restorations

Survival of endodontically treated, post-restored teeth depends on a multitude of factors, all of which are practically impossible to include in a randomized, controlled clinical study. The purpose of this survey was to characterize and analyze reported failures of post-retained restorations to identify factors critical to failure and to type of failure. A questionnaire was mailed to private practitioners in Denmark with a request to complete the questionnaire whenever a patient presented with a failed post-retained restoration. Information was gathered on factors related to the patient, the tooth, the restorative materials, and the techniques. Two-hundred and sixty questionnaires were collected from 171 practitioners over a 3-year period. Functioning time until failure varied between 3 months and 38 years. Mean survival time until failure was 11 years. Of the failed restorations, 61% had functioned for 10 years or less. Fracture of the tooth was the most common type of failure reported, followed by loosening of the post and fracture of the post. Tapered posts implied an increased risk of tooth fracture compared to loosening or fracture of the post, and the relative risk of tooth fracture increased with the functioning time until failure. Fracture of the post was more common among male than female patients. On the basis of this survey of failed post-retained restorations, it was concluded that tapered posts were associated with a higher risk of tooth fracture than were parallel-sided posts

Electronic and thermal nonlinear refractive indices of SOI and nano-patterned SOI measured by Z-scan method

We measure electronic and thermal nonlinear refractive indices of periodically nano-patterned and un-patterned siliconon-insulator (SOI) in comparison with that of bulk silicon, using a fast reflection Z-scan setup with a high-repetition-rate fs laser (at 800 nm wavelength), and a new procedure for discrimination between electronic and thermal nonlinearities. The electronic nonlinear response of nano-structured SOI is strongly enhanced in comparison with those of un-patterned SOI and of bulk Si. These results could be important in silicon photonics for optical devices with nonlinearity controlled by periodic nano-structuring

Strongly enhanced third order nonlinear response of periodically nano-structured silicon-on-insulator (SO) measured by reflection z-scan with femtosecond pulses

We measure a strong enhancement of the third order nonlinear response of periodically nano-patterned and un-patterned silicon-on-insulator (SOI) in comparison with that of bulk silicon, using a fast reflection Z-scan setup with a high-repetition-rate fs laser (at 800 nm wavelength), and a new procedure for discrimination between electronic and thermal nonlinearities. Our procedure, with the laser working in mode-locked or in c.w. regimes, allows precise measurement of both electronic and thermal nonlinear refractive indices of nano-patterned SOI, un-patterned SOI and bulk silicon. These results could be important for nonlinear optical devices with properties controlled by nano-patterning, in silicon photonics

Binary pseudorandom test standard to determine the modulation transfer function of optical microscopes

This work reports on the development of a binary pseudo-random test sample optimized to calibrate the MTF of optical microscopes. The sample consists of a number of 1-D and 2-D patterns, with different minimum sizes of spatial artifacts from 300 nm to 2 microns. We describe the mathematical background, fabrication process, data acquisition and analysis procedure to return spatial frequency based instrument calibration. We show that the developed samples satisfy the characteristics of a test standard: functionality, ease of specification and fabrication, reproducibility, and low sensitivity to manufacturing error