A method for the assessment and compensation of positioning errors in industrial robots

Industrial Robots (IR) are currently employed in several production areas as they enable flexible automation and high productivity on a wide range of operations. The IR low positioning performance, however, has limited their use in high precision applications, namely where positioning errors assume importance for the process and directly affect the quality of the final products. Common approaches to increase the IR accuracy rely on empirical relations which are valid for a single IR model. Also, existing works show no uniformity regarding the experimental procedures followed during the IR performance assessment and identification phases. With the aim to overcome these restrictions and further extend the IR usability, this paper presents a general method for the evaluation of IR pose and path accuracy, primarily focusing on instrumentation and testing procedures. After a detailed description of the experimental campaign carried out on a KUKA KR210 R2700 Prime robot under different operating conditions (speed, payload and temperature state), a novel online compensation approach is presented and validated. The position corrections are processed with an industrial PC by means of a purposely developed application which receives as input the position feedback from a laser tracker. Experiments conducted on straight paths confirmed the validity of the proposed approach, which allows remarkable reductions (in the order of 90%) of the orthogonal deviations and in-line errors during the robot movements

A review of geometry representation and processing methods for cartesian and multiaxial robot-based additive manufacturing

Nowadays, robot-based additive manufacturing (RBAM) is emerging as a potential solution to increase manufacturing flexibility. Such technology allows to change the orientation of the material deposition unit during printing, making it possible to fabricate complex parts with optimized material distribution. In this context, the representation of parts geometries and their subsequent processing become aspects of primary importance. In particular, part orientation, multiaxial deposition, slicing, and infill strategies must be properly evaluated so as to obtain satisfactory outputs and avoid printing failures. Some advanced features can be found in commercial slicing software (e.g., adaptive slicing, advanced path strategies, and non-planar slicing), although the procedure may result excessively constrained due to the limited number of available options. Several approaches and algorithms have been proposed for each phase and their combination must be determined accurately to achieve the best results. This paper reviews the state-of-the-art works addressing the primary methods for the representation of geometries and the subsequent geometry processing for RBAM. For each category, tools and software found in the literature and commercially available are discussed. Comparison tables are then reported to assist in the selection of the most appropriate approaches. The presented review can be helpful for designers, researchers and practitioners to identify possible future directions and open issues

Routinely frozen biopsies of human skeletal muscle are suitable for morphological and immunocytochemical analyses at transmission electron microscopy

The aim of the present investigation was to evaluate whether routinely frozen biopsies of human skeletal muscle may be suitable for morphological and immunocytochemical analyses at transmission electron microscopy. The fixation/embedding protocols we successfully used for decades to process fresh mammalian tissues have been applied to frozen muscle biopsies stored for one to four years in liquid nitrogen. After 2.5% glutaraldehyde -2% paraformaldehyde - 1% OsO4 fixation and embedding in epoxy resin, the ultrastructural morphology of myofibres and satellite cells as well as of their organelles and inclusions proved to be well preserved. As expected, after 4% paraformaldehyde - 0.5% glutaraldehyde fixation and embedding in LR White resin, the morphology of membrane-bounded organelles was relatively poor, although myofibrillar and sarcomeric organization was still recognizable. On the contrary, the myonuclei were excellently preserved and, after conventional staining with uranyl acetate, showed an EDTA-like effect, i.e. the bleaching of condensed chromatin, which allows the visualization of RNP-containing structures. These samples proved to be suitable for immunocytochemical analyses of both cytoskeletal and nuclear components, whereas the poor mitochondrial preservation makes unreliable any in situ investigation on these organelles

Path Approximation Strategies for Robot Manufacturing: A Preliminary Experimental Evaluation

Industrial Robots (IRs) are increasingly adopted for material subtraction or deposition functions owing to their advantages over machine tools, like cost-effectiveness and versatility. Unfortunately, the development of efficient robot manufacturing processes still faces unsolved issues related to the IRs poor positioning accuracy and to the tool path generation process. Novel engineering methods and tools are needed for CAD based programming of accurate paths and continuous robot motions to obtain the required manufacturing quality and tolerances. Within this context, to achieve smoothness along the tool path formed by linear G-code segments, the IR controllers’ approximation strategies, summarily reported in the manufacturer’s manuals, must be considered. The aim of this paper is to present the preliminary work carried out to identify the approximation algorithms of a Kuka IR when executing linear moves. An experimental study is conducted by varying the controller settings and the maximum translational velocity. The robot behavior has been acquired thanks to the controller tracing function and then processed to yield relations readily employable for the interpretation of G-Code commands and the subsequent generation of proper robot motion instructions. The obtained formulas allow to accurately predict the robot geometric path and kinematics within the corner transition between two linear segments

Analysis of the Energy Consumption of a Novel DC Power Supplied Industrial Robot

The energy consumption and electrical characteristics of a novel direct current (DC) power supplied industrial robot prototype are compared and analyzed with a state of the art alternating current (AC) supplied industrial robot. An extensive set of experiments shows an important reduction of the total energy consumption for different electrical power profiles measured in various robot trajectories with specific working temperatures. The recuperated energy is also analyzed in the different scenarios. Experimental results show that a DC type robot can be up to 12.5% more energy-efficient than an equivalent AC type robot

Cultured myoblasts from patients affected by myotonic dystrophy type 2 exhibit senescence-related features: ultrastructural evidence

Myotonic dystrophy type 2 (DM2) is an autosomal dominant disorder caused by the expansion of the tetranucleotidic repeat (CCTG)n in the first intron of the Zinc Finger Protein-9 gene. In DM2 tissues, the expanded mutant transcripts accumulate in nuclear focal aggregates where splicing factors are sequestered, thus affecting mRNA processing. Interestingly, the ultrastructural alterations in the splicing machinery observed in the myonuclei of DM2 skeletal muscles are reminiscent of the nuclear changes occurring in age-related muscle atrophy. Here, we investigated in vitro structural and functional features of satellite cell-derived myoblasts from biceps brachii, in the attempt to investigate cell senescence indices in DM2 patients by ultrastructural cytochemistry. We observed that in satellite cell-derived DM2 myoblasts, cell-senescence alterations such as cytoplasmic vacuolization, reduction of the proteosynthetic apparatus, accumulation of heterochromatin and impairment of the pre-mRNA maturation pathways occur earlier than in myoblasts from healthy patients. These results, together with preliminary in vitro observations on the early onset of defective structural features in DM2 myoblast derived-myotubes, suggest that the regeneration capability of DM2 satellite cells may be impaired, thus contributing to the muscular dystrophy in DM2 patients

Neuromyelitis optica spectrum disorders associated with systemic sclerosis: a case report and literature review

Neuromyelitis optica (NMO) is an autoimmune demyelinating disease of the central nervous system (CNS) afecting predominantly the spinal cord, brainstem, and optic nerves [1]. NMOSD may be associated with a variety of immunemediated disorders, such as systemic lupus erythematosus, Sjögren syndrome, and other organ-specifc autoimmune diseases [2], though accurate information about their prevalence is not available [3]. Systemic sclerosis (SSc) is characterized by vascular alterations, activation of the immune system, and tissue fbrosis [4]. Only a few cases of coexisting systemic sclerosis (SSc) and NMOSD are described [1, 5–9]. We report a case of an NMOSD AQP4-IgG antibodypositive patient associated with SSc and a review of the available evidence of the relationship between these autoimmune disease

RNA transcription and maturation in skeletal muscle cells are similarly impaired in myotonic dystrophy and sarcopenia: the ultrastructural evidence.

without abstrac