28 research outputs found

    Aging of HTPB/AP-based composite solid propellants, depending on the NCO/OH and triol/diol ratios

    No full text
    Aging behavior of hydroxyl-terminated polybutadiene/ammonium perchlorate (HTPB/AP)-based composite solid propellants was studied as a function of crosslink density, which is predominantly determined by the molar ratio of diisocyanate to total hydroxyl (NCO/OH ratio) and the molar ratio of triol to diol (triol/diol ratio). For this purpose, 16 propellant samples with different compositions were prepared by changing the NCO/OH ratio as 0.81, 0.82, 0.83, and 0.85 for each triol/diol ratio of 0.07, 0.09, 0.11, and 0.13, and subjected to an accelerated aging at 65 degreesC. The changes in the mechanical properties were monitored throughout the aging period. In the initial part of the aging period, a sharp increase in stress, modulus, and hardness values and a sharp decrease in strain values were observed for all the propellants. At further stages of aging, only slight changes were observed in the mechanical properties. Concerning the aging criterion as reduction in the strain capability more than the half of the initial value, the propellants with respective NCO/OH-triol/diol ratios of 0.81-0.09, 0.85-0.09, 0.81-0.13, 0.83-0.13, and 0.85-0.13 can be considered to be aged with time. (C) 2000 John Wiley & Sons, Inc

    Fine-tuning the mechanical properties of hydroxyl-terminated polybutadiene/ammonium perchlorate-based composite solid propellants by varying the NCO/OH and triol/diol ratios

    No full text
    Changes in the mechanical properties of hydroxyl-terminated polybutadiene/ammonium perchlorate-based composite solid propellants were studied during the curing period with respect to variations in the crosslink density, which was predominantly determined by the equivalent ratio of diisocyanate to total hydroxyl (NCO/OH ratio) and the equivalent ratio of triol to diol (triol/diol ratio). For this purpose, 16 propellants were prepared in different compositions through changes in the NCO/OH ratios (0.81, 0.82, 0.83, and 0.85) for each triol/diol ratio (0.07, 0.09, 0.11, and 0.13) and were tested for their mechanical properties immediately after curing. The propellants with an NCO/OH ratio of 0.82 had minimum stress, modulus, and hardness with maximum strain capability, whereas the propellants with an NCO/OH ratio of 0.85 showed just the opposite behavior. Variations in the isocyanate level seemed to have more effect on the mechanical properties at higher triol/diol ratios. It was also concluded that the propellants with triol/diol-NCO/OH combinations of 0.11-0.83, 0.11-0.85, 0.13-0.81, 0.13-0.83, and 0.13-0.85 were not acceptable for upper stage case-bonded rocket applications because of either high tensile strength or high modulus. (C) 2002 Wiley Periodicals, Inc

    Analyse multiscalaire de la caractérisation des écosystèmes forestiers guyanais et des impacts anthropiques à partir de la télédédection spatiale

    No full text
    Caractériser la surface terrestre est important pour analyser la diversité des paysages et pour appréhender les changements d'utilisation du sol. En général, dans les cartographies de végétation de l'Amazonie et du plateau des Guyanes, la forêt est représentée sous la forme d'une grande couche verte homogène (TREES web page; Eva et al., 2004). Les cartes détaillées des zones forestières tropicales restent rares et généralement elles ne concernent qu'une région ou un pays. Une des raisons principales de cette lacune cartographique est la difficulté d'observer et de surveiller de vastes étendues de forêts tropicales à un coût raisonnable. Par ailleurs, les investigations sur le terrain sont souvent focalisées sur des espaces limités. Les stations de recherche, quand elles existent, restent cantonnées à l'observation d'une petite portion de territoire et leurs résultats sont difficilement généralisables aux échelles régionales, nationales ou continentales. Finalement, peu d'informations sont utilisables pour caractériser les grands espaces forestiers tropicaux comme ceux du plateau des Guyanes. De ce fait, ces forêts sont pratiquement inconnues à cause d'une part de leur immensité et d'autre part de leur inaccessibilité. La télédétection apparaît potentiellement intéressante dans un tel contexte, pour analyser d'aussi grands espaces. Cela malgré les sérieuses limitations pour l'utilisation des longueurs d'onde visible, dues principalement à la couverture nuageuse quasi permanente de ces régions. Seules les données radar ne sont pas gênées par les nuages ou des survols à très basse altitude. Les capteurs radar sont de très bons instruments pour évaluer le relief, les cours d'eau et les contacts forêt/non-forêt. Malheureusement, ils sont assez limités pour différencier les types de forêt comme nous souhaitions le faire dans cette étude (Van der Sanden 1997). C'est pourquoi nous proposons une approche basée sur l'utilisation d'une série annuelle de données journalières issue du capteur VEGETATION embarqué sur le satellite SPOT-4 (VEGETATION web page). Toutefois, cette approche ne permet pas à elle seule de surveiller le territoire et d'en obtenir des informations précises sur les activités humaines qui marquent les paysages naturels. C'est pourquoi ont été développés en parallèle des outils utilisant des données satellitaires à haute résolution afin de remplir cette mission et pouvoir compléter l'analyse générale du plateau des Guyanes. En combinant les deux approches, on obtient alors une vue synthétique des milieux et une évaluation des différents impacts liés aux activités humaines. Cette double approche permet de jeter les bases techniques d'un observatoire pour planifier et gérer au mieux l'ensemble du plateau des Guyanes
    corecore