COMPARISON OF TWO CHICKEN GENOTYPES ORGANICALLY REARED: OXIDATIVE STABILITY AND OTHER QUALITATIVE TRAITS

The effect of genotype on the oxidative stability and other qualitative traits of chicken meat was studied. Two groups of 200 chicks (Ross 205 and Kabir) were reared according to the organic farming system. At 81 d of age 20 birds per group were slaughtered and after refrigeration (24 h at 4°C) of the carcasses, Pectoralis major muscles were excised for analyses.Samples were analysed after 0, 24, 48, 72 and 96 hours of storage at 4°C under continuous fluorescent illumination (2300 lux). The analyses concerned the chemical composition and the shear force (only at time 0) and the progress of several traits as pH, CIELAB values, Thiobarbituric Acid Reactive Substances (TBARS), panel test and fatty acid composition (at 0 and after 96 h). Genotype greatly affected the physico-chemical characteristics and the sensory evaluation. The meat from Ross chickens showed high TBARS values, perhaps due to selection for growth rate that reduced their adaptability to greater space allowance and to poorer environmental conditions; these higher TBARS values were also negatively correlated to lightness and yellowness. The initial level of TBARS affected the oxidative stability of breast meat during storage. The amount of TBARS showed significantly negative relationship with the sensory evaluation; breast meat of Kabir had higher scores for liking when the level of malondialdehyde was less than 2.5 mg kg-1

Greening crowdfunding campaigns: an investigation of message framing and effective communication strategies for funding success

Purpose: Recognising the growing importance of environmental and sustainable activities and the role of communication strategies in soliciting their financing, this work investigates the influence of message framing, green emphasis and quantitative information on the probability of green crowdfunding campaigns' success. Design/methodology/approach: This analysis is based on crowdfunding campaigns published between 2015 and 2020 on the Indiegogo platform in the category “Community projects – Environment”. The study develops an in-depth qualitative content analysis of the projects before performing an empirical examination to determine funding causes. Findings: Communication strategies (message framing, green emphasis and quantitative goals) affect funding success. However, project category moderates the impact of message framing and green emphasis on campaign success. While positive framing increases agri-food campaign success, negative framing is more effective for clean energy and climate preservation projects. Moreover, indication of a quantitative goal and a marked green emphasis in a project's presentation increase campaign success, but a too marked green emphasis is only effective for agri-food projects. Practical implications: Green entrepreneurs and campaign managers must work carefully on their projects' communication, accounting for the type of product proposed, emphasising green components in its description and utilising quantitative information to present future goals. These strategies maximise backers' responses and enable entrepreneurs to obtain funding. The authors’ findings may be extended to other contexts, including the banking sector, to craft effective communication strategies for green financial products. Originality/value: By applying framing theory in a new context (i.e. the online financing of green entrepreneurs), this study identifies new campaign success determinants and provides evidence for the moderating role of project category. Furthermore, the study highlights the need to develop different communication strategies for social and environmental-oriented projects

Using the Process Digital Twin as a tool for companies to evaluate the Return on Investment of manufacturing automation

The fourth industrial revolution is gaining momentum, but still lacks full realization. Several studies suggest that many companies around the world have begun the digital transformation undertaking, but most are still far from full adoption and yet fail to see the full economic potential, being stuck in what has been called "pilot purgatory”. Digitalization is largely recognized as an accelerator and enabler for full automation in manufacturing, but companies are still struggling to assess the return on investment and the impact on operational performance indicators. Therefore, companies, especially SMEs characterized by dynamic, high-value, high-mix, and low-volume contexts, are reluctant to invest further. By incorporating simulation, data analytics and behavioral models, digital twins may also be used to support automation solutions ramp-up, demonstrate their impact evaluation, usage scenarios, eliminating the need for physical prototypes, reducing development time, and improving quality. Few forward-thinking companies are pursuing the digital transformation path, while the majority are clipping the wings of a transformation that is essential for a sustainable manufacturing. This paper describes a theoretical approach to exploit the digital twin technology to gather insights towards a realistic economical assessment of full automation solutions, to back and encourage investments to realize the potential of the digital manufacturing transformation. The approach is being tested under the European Union’s Horizon 2020 research and innovation program under grant agreement No. 958363, which provides an opportunity to assess how the various components of the method are constructed, how complex they are, and what level of effort is required, using a practical example

Thermal, viscoelastic and mechanical behavior of polypropylene with synthetic boehmite alumina nanoparticles

Effects of nanofiller concentration and surface treatments on the morphology, thermal, viscoelastic and mechanical behaviors of polypropylene copolymer (PP)/boehmite alumina (BA) nanocomposites were investigated. Both untreated and treated BA particles with octylsilane (OS) and with sulphonic acid compound (OS2) were added up to 10 wt% to produce nanocomposites by melt mixing followed by film blow molding and hot pressing. Dispersion of BA was studied by scanning electron microscopy. Differential scanning calorimetry and wide-angle X-ray scattering were adopted to detect changes in the crystalline structure of PP. Thermooxidative degradation of the nanocomposites was assessed by thermogravimetrical analysis. Dynamic mechanical analysis served for studying the viscoelastic, whereas quasi-static tensile, creep and Elmendorf tear tests were used to detect changes in the mechanical performance. BA nanoparticles were finely dispersed in PP up to 10 wt%, even when they were not surface modified. The resistance to thermal degradation was markedly improved by BA nanomodification. Changes observed in the mechanical properties were attributed to BA dispersion, filler/matrix interactions and related effects because the crystalline characteristics of the PP matrix practically did not change with BA modification

A simple method for the determination of lipid composition of human bile

The Entero-Test, a device for easy sampling of gastrointestinal contents, including bile, has been used for determination of biliary lipid composition. The device consists of a weighted gelatin capsule containing 140 cm of a highly absorbent nylon line. The capsule is swallowed while one end of the string is taped to the face. After 3.5 h, when the line has reached the duodenum, gallbladder contraction is stimulated by intramuscular administration of ceruletide. The line is pulled out, and the last 15 cm are eluted four times in methanol. Total bile acids (by 3 alpha-hydroxysteroid-dehydrogenase assay), individual bile acids (by high performance liquid chromatography), phospholipids (by assay of lipid-soluble phosphorus), and cholesterol (by gas-liquid chromatography) are determined in the eluate. Tests in vitro demonstrated no preferential binding and a good recovery of biliary lipids from the thread. Similar values of biliary cholesterol saturation were obtained by means of duodenal intubation and of the Entero-Test in a series of 12 subjects (r = 0.952). In 5 subjects, individual bile acids were also measured and were found to be similar with both techniques (r = 0.948). When the test was repeated over 3 days in a series of 7 subjects, biliary cholesterol saturation was found to be remarkably reproducible (CV = 7.6%). Thus, the Entero-Test is a convenient technique for the determination of biliary lipid composition, which can be particularly useful in longitudinal studies

Pancreatic cancer-associated diabetes mellitus: an open field for proteomic applications.

Background: Diabetes mellitus is associated with pancreatic cancer in more than 80% of the cases. Clinical, epidemiological, and experimental data indicate that pancreatic cancer causes diabetes mellitus by releasing soluble mediators which interfere with both beta-cell function and liver and muscle glucose metabolism. Methods: We analysed, by matrix-assisted laser desorption ionization time of flight (MALDI-TOF), a series of pancreatic cancer cell lines conditioned media, pancreatic cancer patients' peripheral and portal sera, comparing them with controls and chronic pancreatitis patients' sera. Results: MALDI-TOF analysis of pancreatic cancer cells conditioned media and patients' sera indicated a low molecular weight peptide to be the putative pancreatic cancer-associated diabetogenic factor. The sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) analysis of tumor samples from diabetic and non-diabetic patients revealed the presence of a 1500 Da peptide only in diabetic patients. The amino acid sequence of this peptide corresponded to the N-terminal of an S-100 calcium binding protein, which was therefore suggested to be the pancreatic cancer-associated diabetogenic factor. Conclusions: We identified a tumor-derived peptide of 14 amino acids sharing a 100% homology with an S-100 calcium binding protein, which is probably the pancreatic cancer-associated diabetogenic facto

Pancreatic cancer-derived S-100A8 N-terminal peptide: a diabetes cause?

BACKGROUND: Our aim was to identify the pancreatic cancer diabetogenic peptide. METHODS: Pancreatic tumor samples from patients with (n=15) or without (n=7) diabetes were compared with 6 non-neoplastic pancreas samples using SDS-PAGE. RESULTS: A band measuring approximately 1500 Da was detected in tumors from diabetics, but not in neoplastic samples from non-diabetics or samples from non-neoplastic subjects. Sequence analysis revealed a 14 amino acid peptide (1589.88 Da), corresponding to the N-terminal of the S100A8. At 50 nmol/L and 2 mmol/L, this peptide significantly reduced glucose consumption and lactate production by cultured C(2)C(12) myoblasts. The 14 amino acid peptide caused a lack of myotubular differentiation, the presence of polynucleated cells and caspase-3 activation. CONCLUSIONS: The 14 amino acid peptide from S100A8 impairs the catabolism of glucose by myoblasts in vitro and may cause hyperglycemia in vivo. Its identification in biological fluids might be helpful in diagnosing pancreatic cancer in patients with recent onset diabetes mellitus

Present results and perspectives of allogeneic non-myeloablative hematopoietic stem cell transplantation for treatment of human solid tumors

Several clinical observations have confirmed that a donor immune-mediated anti-malignancy effect, called graft-versus-leukemia or graft-versus-tumor, occurs following allogeneic hematopoietic stem cell transplantation. While the potential antitumor effect mediated by donor lymphocytes has been established in many hematological malignancies, its efficacy in inducing clinically meaningful responses in solid tumors has been largely unexplored despite evidence of its potential benefit in experimental animal models. Only in recent years has the investigational application of non-myeloablative stem cell transplantation in patients with refractory non-hematological cancers proved that a graft-versus-tumor effect can be generated in patients with metastatic renal cell cancer and possibly with other solid tumors. In the present article we review the biological basis, development and early clinical results of this novel immunotherapeutic approach for solid tumors

Prevention of bisphosphonate-related mandibular fractures = Prevenzione delle fratture mandibolari conseguenti alla necrosi ossea da difosfonati

La frattura della mandibola rappresenta solitamente l\u2019evento finale nei pazienti che presentano una progressione della necrosi ossea derivante dall\u2019impiego dei difosfonati. Si tratta di una grave complicanza molto dolorosa che impedisce ai pazienti di alimentarsi correttamente, essendo pertanto un fattore che peggiora notevolmente la loro qualit\ue0 di vita. L\u2019obiettivo del trattamento dei pazienti che presentano la necrosi ossea legata ai difosfonati (BRONJ) dovrebbe essere rallentare la progressione della malattia. Presentiamo una soluzione tecnica per il trattamento dei pazienti che presentano necrosi mandibolare in stadio 3 ad alto rischio di sviluppare una frattura, avendo un\u2019altezza mandibolare residua di osso sano inferiore a 6 mm. Il trattamento consiste nel posizionamento di una placca ricostruttiva mandibolare per via extra-orale in un piano superficiale al muscolo platisma per tenere i mezzi di sintesi separati dal sito infettivo e non farli contaminare con conseguente necessit\ue0 di doverli rimuovere, seguito dal courettage per via endorale della necrosi mandibolare. Il rispetto della vascolarizzazione mandibolare e l\u2019assenza di contatto diretto tra il sito di osteonecrosi e la placca ricostruttiva rappresentano alcuni dei vantaggi di questa metodica. La placca ricostruttiva rinforza la mandibola e consente di aggredire energicamente l\u2019area di necrosi mandibolare, senza esporre il paziente a rischio di frattura iatrogena. Questo garantisce al paziente un rallentamento della progressione della malattia e impedisce la frattura patologica della mandibola, inevitabile epilogo delle necrosi ossee mandibolari.Mandibular fracture is usually the clinical end of bisphosphonate-related osteonecrosis of the jaw. This is a painful complication and patients cannot feed as usual, with a worsening of their quality of life. The goal of treatment in bisphosphonate related osteonecrosis of jaw (BRONJ) patients is to slow progression of bone necrosis. We present a novel technique for treatment of severe mandibular BRONJ in stage 3 patients that present with a high risk to develop fracture, since they have a residual unaffected mandibular bone height less than 6 mm. We treated 10 patients in this clinical situation with an extra-oral application of a reconstructive plate superficial to the platysma, to keep the plate separated from the infected site to avoid contamination and consequent need of removal, followed by an intraoral approach for active curettage of mandibular necrosis. The preservation of blood supply to the mandible and avoidance of direct contact of the infected site with the reconstructive plate are some advantages of this technique. This plate allows enhancement of mandibular strength, allowing proper treatment of the BRONJ site on the oral side without fear of causing a mandibular fracture when the residual mandible is thin. This technical solution guarantees these patients an extended disease-free period since it is effective in preventing mandibular fractures in patients with low mandibular residual height left after the BRONJ onset

Prevenzione delle fratture mandibolari conseguenti alla necrosi ossea da difosfonati

La frattura della mandibola rappresenta solitamente l'evento finale nei pazienti che presentano una progressione della necrosi ossea derivante dall'impiego dei difosfonati. Si tratta di una grave complicanza molto dolorosa che impedisce ai pazienti di alimentarsi correttamente, essendo pertanto un fattore che peggiora notevolmente la loro qualità di vita. L'obiettivo del trattamento dei pazienti che presentano la necrosi ossea legata ai difosfonati (BRONJ) dovrebbe essere rallentare la progressione della malattia. Presentiamo una soluzione tecnica per il trattamento dei pazienti che presentano necrosi mandibolare in stadio 3 ad alto rischio di sviluppare una frattura, avendo un'altezza mandibolare residua di osso sano inferiore a 6 mm. Il trattamento consiste nel posizionamento di una placca ricostruttiva mandibolare per via extra-orale in un piano superficiale al muscolo platisma per tenere i mezzi di sintesi separati dal sito infettivo e non farli contaminare con conseguente necessità di doverli rimuovere, seguito dal courettage per via endorale della necrosi mandibolare. Il rispetto della vascolarizzazione mandibolare e l'assenza di contatto diretto tra il sito di osteonecrosi e la placca ricostruttiva rappresentano alcuni dei vantaggi di questa metodica. La placca ricostruttiva rinforza la mandibola e consente di aggredire energicamente l'area di necrosi mandibolare, senza esporre il paziente a rischio di frattura iatrogena. Questo garantisce al paziente un rallentamento della progressione della malattia e impedisce la frattura patologica della mandibola, inevitabile epilogo delle necrosi ossee mandibolari