Picosecond Semiconductor Generator for Capacitive Sensors Calibration

The paper describes a semiconductor picosecond pulse generator that can be used to calibrate capacitive high voltage sensors of MV range. The generator is designed as a base unit, to which external pulse converters are connected. In the base unit, semiconductor devices – first a semiconductor opening switch (SOS) and then a semiconductor sharpener (SS) – generate an output pulse with a rise time of 220 ps and a subsequent flat-top of 2 ns in duration. The pulse amplitude is around 1 kV across 50 Ω load. An external diode sharpener generates a pulse with 120 ps rise time and 500-ps flat-top at the amplitude of 850 V. To switch the semiconductor sharpeners to the conducting state, the shock-ionization wave mode is used. Additional pulse converters make it possible to generate output pulses across 50 Ω load with the rise time of 70-150 ps, the pulse duration of 135-310 ps, and the amplitude of 130–480 V. The electrical diagram of the generator and waveforms of the output pulses are presented. An example of the calibration of capacitive sensors of a multi-gigawatt picosecond generator is also shown. © 2021 Institute of Physics Publishing. All rights reserved

High-voltage electrode optimization towards uniform surface treatment by a pulsed volume discharge

In this study, the shape and material of the high-voltage electrode of an atmospheric pressure plasma generation system were optimised. The research was performed with the goal of achieving maximum uniformity of plasma treatment of the surface of the low-voltage electrode with a diameter of 100 mm. In order to generate low-temperature plasma with the volume of roughly 1 cubic decimetre, a pulsed volume discharge was used initiated with a corona discharge. The uniformity of the plasma in the region of the low-voltage electrode was assessed using a system for measuring the distribution of discharge current density. The system's low-voltage electrode - collector - was a disc of 100 mm in diameter, the conducting surface of which was divided into 64 radially located segments of equal surface area. The current at each segment was registered by a high-speed measuring system controlled by an ARM™-based 32-bit microcontroller. To facilitate the interpretation of results obtained, a computer program was developed to visualise the results. The program provides a 3D image of the current density distribution on the surface of the low-voltage electrode. Based on the results obtained an optimum shape for a high-voltage electrode was determined. Uniformity of the distribution of discharge current density in relation to distance between electrodes was studied. It was proven that the level of non-uniformity of current density distribution depends on the size of the gap between electrodes. Experiments indicated that it is advantageous to use graphite felt VGN-6 (Russian abbreviation) as the material of the high-voltage electrode's emitting surface

Generation of electromagnetic fields of extremely high intensity by coherent summation of Cherenkov superradiance pulses

We demonstrate both theoretically and experimentally the possibility of correlating the phase of a Cherenkov superradiance (SR) pulse to the sharp edge of a current pulse, when spontaneous emission of the electron bunch edge serves as the seed for SR processes. By division of the driving voltage pulse across several parallel channels equipped with independent cathodes we can synchronize several SR sources to arrange a two-dimensional array. In the experiments carried out, coherent summation of radiation from four independent 8-mm wavelength band SR generators with peak power 600 MW results in the interference maximum of the directional diagram with an intensity that is equivalent to radiation from a single source with a power of 10 GW