All-optical delay line using semiconductor cavity solitons

An all-optical delay line based on the lateral drift of cavity solitons in semiconductor microresonators is proposed and experimentally demonstrated. The functionalities of the device proposed as well as its performance is analyzed and compared with recent alternative methods based on the decrease of group velocity in the vicinity of resonances. We show that the current limitations can be overcome using broader devices with tailored material responses

Catch bond drives stator mechanosensitivity in the bacterial flagellar motor

The bacterial flagellar motor (BFM) is the rotary motor that rotates each bacterial flagellum, powering the swimming and swarming of many motile bacteria. The torque is provided by stator units, ion motive force-powered ion channels known to assemble and disassemble dynamically in the BFM. This turnover is mechanosensitive, with the number of engaged units dependent on the viscous load experienced by the motor through the flagellum. However, the molecular mechanism driving BFM mechanosensitivity is unknown. Here, we directly measure the kinetics of arrival and departure of the stator units in individual motors via analysis of high-resolution recordings of motor speed, while dynamically varying the load on the motor via external magnetic torque. The kinetic rates obtained, robust with respect to the details of the applied adsorption model, indicate that the lifetime of an assembled stator unit increases when a higher force is applied to its anchoring point in the cell wall. This provides strong evidence that a catch bond (a bond strengthened instead of weakened by force) drives mechanosensitivity of the flagellar motor complex. These results add the BFM to a short, but growing, list of systems demonstrating catch bonds, suggesting that this "molecular strategy" is a widespread mechanism to sense and respond to mechanical stress. We propose that force-enhanced stator adhesion allows the cell to adapt to a heterogeneous environmental viscosity and may ultimately play a role in surface-sensing during swarming and biofilm formation

All-optical delay line using semiconductor cavity solitons (vol 92, 011101, 2008)

Correction of Pedaci, F. and Barland, S. and Caboche, E. and Firth, W.J. and Oppo, G.L. and Tredicce, J.R. and Ackemann, T. and Scroggie, A.J. (2008) All-optical delay line using semiconductor cavity solitons. Applied Physics Letters, 92 (1). ISSN 0003-695

Birefringent quartz micro cylinders for angular optical tweezers

International audienc

Microresonator defects as sources of drifting cavity solitons

Cavity solitons (CS) are localized structures appearing as single intensity peaks in the homogeneous background of the field emitted by a nonlinear (micro)resonator. In real devices, their position is strongly influenced by the presence of defects in the device structure. In this Letter we show that the interplay between these defects and a phase gradient in the driving field induces the spontaneous formation of a regular sequence of CSs moving in the gradient direction. Hence, defects behave as a device built-in CS source, where the CS generation rate can be set by controlling the system parameters

Microresonator defects as sources of drifting cavity solitons

Cavity solitons (CS) are localized structures appearing as single intensity peaks in the homogeneous background of the field emitted by a nonlinear (micro)resonator. In real devices, their position is strongly influenced by the presence of defects in the device structure. In this Letter we show that the interplay between these defects and a phase gradient in the driving field induces the spontaneous formation of a regular sequence of CSs moving in the gradient direction. Hence, defects behave as a device built-in CS source, where the CS generation rate can be set by controlling the system parameters

Observation of bright polariton solitons in a semiconductor microcavity

Microcavity polaritons are composite half-light half-matter quasi-particles, which have recently been demonstrated to exhibit rich physical properties, such as non-equilibrium Bose-Einstein condensation, parametric scattering and superfluidity. At the same time, polaritons have some important advantages over photons for information processing applications, since their excitonic component leads to weaker diffraction and stronger inter-particle interactions, implying, respectively, tighter localization and lower powers for nonlinear functionality. Here we present the first experimental observations of bright polariton solitons in a strongly coupled semiconductor microcavity. The polariton solitons are shown to be non-diffracting high density wavepackets, that are strongly localised in real space with a corresponding broad spectrum in momentum space. Unlike solitons known in other matter-wave systems such as Bose condensed ultracold atomic gases, they are non-equilibrium and rely on a balance between losses and external pumping. Microcavity polariton solitons are excited on picosecond timescales, and thus have significant benefits for ultrafast switching and transfer of information over their light only counterparts, semiconductor cavity lasers (VCSELs), which have only nanosecond response time

Advances in full field microscopy with table-top soft x-ray lasers

We describe recent advances in the demonstration of table-top full field microscopes that use soft x-ray lasers for illumination. We have achieved wavelength resolution and single shot exposure operation with a very compact 46.9 nm microscope based on a desk-top size capillary discharge laser. This {lambda}-46.9 nm microscope has been used to capture full field images of a variety of nanostructure systems and surfaces. In a separate development we have demonstrated a zone plate microscope that uses {lambda}=13.2 nm laser illumination to image absorption defects in an extreme ultraviolet lithography (EUVL) mask in the same geometry used in a 4x demagnification EUVL stepper. Characterization of the microscope’s transfer function shows it can resolve 55 nm half period patterns. With these capabilities, the {lambda}-13.2 nm microscope is well suited for evaluation of pattern and defect printability of EUVL masks for the 22 nm node

Personalizing Cancer Pain Therapy: Insights from the Rational Use of Analgesics (RUA) Group

Introduction: A previous Delphi survey from the Rational Use of Analgesics (RUA) project involving Italian palliative care specialists revealed some discrepancies between current guidelines and clinical practice with a lack of consensus on items regarding the use of strong opioids in treating cancer pain. Those results represented the basis for a new Delphi study addressing a better approach to pain treatment in patients with cancer. Methods: The study consisted of a two-round multidisciplinary Delphi study. Specialists rated their agreement with a set of 17 statements using a 5-point Likert scale (0 = totally disagree and 4 = totally agree). Consensus on a statement was achieved if the median consensus score (MCS) (expressed as value at which at least 50% of participants agreed) was at least 4 and the interquartile range (IQR) was 3–4. Results: This survey included input from 186 palliative care specialists representing all Italian territory. Consensus was reached on seven statements. More than 70% of participants agreed with the use of low dose of strong opioids in moderate pain treatment and valued transdermal route as an effective option when the oral route is not available. There was strong consensus on the importance of knowing opioid pharmacokinetics for therapy personalization and on identifying immediate-release opioids as key for tailoring therapy to patients’ needs. Limited agreement was reached on items regarding breakthrough pain and the management of opioid-induced bowel dysfunction. Conclusion: These findings may assist clinicians in applying clinical evidence to routine care settings and call for a reappraisal of current pain treatment recommendations with the final aim of optimizing the clinical use of strong opioids in patients with cancer

Nonlinear optics and saturation behavior of quantum dot samples under continuous wave driving

The nonlinear optical response of self-assembled quantum dots is relevant to the application of quantum dot based devices in nonlinear optics, all-optical switching, slow light and self-organization. Theoretical investigations are based on numerical simulations of a spatially and spectrally resolved rate equation model, which takes into account the strong coupling of the quantum dots to the carrier reservoir created by the wetting layer states. The complex dielectric susceptibility of the ground state is obtained. The saturation is shown to follow a behavior in between the one for a dominantly homogeneously and inhomogeneously broadened medium. Approaches to extract the nonlinear refractive index change by fringe shifts in a cavity or self-lensing are discussed. Experimental work on saturation characteristic of InGa/GaAs quantum dots close to the telecommunication O-band (1.24-1.28 mm) and of InAlAs/GaAlAs quantum dots at 780 nm is described and the first demonstration of the cw saturation of absorption in room temperature quantum dot samples is discussed in detail