Design of double functionalized carbon nanotube for amphotericin B and genetic material delivery.

In the present work, single wall carbon nanotubes (SWCNT) were successively functionalized with phospholipid DSPE-PEG carboxylic acid, and then, with ethylenediamine (EDA), to obtain double functionalized single wall carbon nanotube (DFSWCNT). Then, DFSWCNT was applied as a carrier for delivering amphotericin B (Amb) and EGFP plasmid. FSWCNT’s concentration obtained via UV–visible analysis was 0.99 mg/mL. The TGA analysis results provided the lost weights of DSPE-PEG-COOH, EDA, Amb and SWCNT impurities. XPS results showed that carbon atoms’ percentage decreased during the functionalization processes from 97.2% (SWCNT) to 76.4% (FSWCNT) and 69.9% (DFSWNCT). Additionally, the oxygen atoms’ percentage increased from 2.3% (SWCNT) to 21% and 22.5% for FSWCNT and DFSWCNT, respectively. New bonds such as C–N and N–C=O appeared in the synthesized nanocarrier. The IG/ID ratio in Raman analysis decreased from 7.15 (SWCNT) to 4.08 (FSWCNT). The amount of Amb released to phosphate buffer saline medium was about 33% at pH = 5.5 and 75% at pH = 7.4 after 48 h. CCK8 results confirmed that the toxicity of functionalized SWCNT had decreased. In a 2:1 ratio of DFSWCNT/EGFP plasmid, the cell viability (87%) and live transfected cells (56%) were at their maximum values. The results indicate that carbon nanotubes have the potential to be applied as drug/gene delivery systems with outstanding properties such as high loading capacity and easy penetration to cell membrane.This work was supported by the Basque Country Government (IT907-16). Additional funding was provided by the CIBER of Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), an initiative of the Carlos III Health Institute (ISCIII)

A novel strategy for process optimization of a natural gas liquid recovery unit by replacing Joule–Thomson valve with supersonic separator

Abstract The natural gas liquid recovery is an important process in a gas plant to correct hydrocarbon dew point and earn profit. In this study, a natural gas liquid recovery unit operated based on the Joule–Thomson process was investigated and its performance was optimized. To improve the system performance, the plant configuration and intermediate pressure ratio were defined as the variables and maximization of the natural gas liquid recovery rate and maximization of exergy efficiency were defined as the objective functions. To improve the plant performance, the amount of natural gas liquid recovery rate should be increased. To achieve this goal, several scenarios for the intermediate pressure ratio and three new configurations were proposed for the investigated gas plant. In the proposed configurations, the supersonic separators with optimized structures were used instead of the Joule–Thomson process. It was observed that all three proposed configurations improved the natural gas liquid recovery rate compared to the existing configuration. For example, by installing two supersonic separators instead of second and third stage Joule–Thomson valve + low temperature separator, at the optimal operating condition, the natural gas liquid recovery rate increased about 390%. The influence of the intermediate pressure ratio on the phase envelope diagram, exergy efficiency, dew point depression and natural gas liquid recovery rate was also investigated. By comparing the influence of intermediate pressure ratio and modifying the plant configuration on the objective functions, it was observed that the system performance can be further improved by modifying the plant configuration

In Vitro Evaluation of DSPE-PEG (5000) Amine SWCNT Toxicity and Efficacy as a Novel Nanovector Candidate in Photothermal Therapy by Response Surface Methodology (RSM)

Nowadays, finding a novel, effective, biocompatible, and minimally invasive cancer treatment is of great importance. One of the most promising research fields is the development of biocompatible photothermal nanocarriers. PTT (photothermal therapy) with an NIR (near-infrared) wavelength range (700–2000 nm) would cause cell death by increasing intercellular and intracellular temperature. PTT could also be helpful to overcome drug resistance during cancer treatments. In this study, an amine derivative of phospholipid poly ethylene glycol (DSPE-PEG (5000) amine) was conjugated with SWCNTs (single-walled carbon nanotubes) to reduce their intrinsic toxicity. Toxicity studies were performed on lung, liver, and ovarian cancer cell lines that were reported to show some degree of drug resistance to cisplatin. Toxicity results suggested that DSPE-PEG (5000) amine SWCNTs might be biocompatible photothermal nanocarriers in PTT. Therefore, our next step was to investigate the effect of DSPE-PEG (5000) amine SWCNT concentration, cell treatment time, and laser fluence on the apoptosis/necrosis of SKOV3 cells post-NIR exposure by RSM and experimental design software. It was concluded that photothermal efficacy and total apoptosis would be dose-dependent in terms of DSPE-PEG (5000) amine SWCNT concentration and fluence. Optimal solutions which showed the highest apoptosis and lowest necrosis were then achieved

Estimation of the Viscosity of Ionic Liquids Containing Binary Mixtures Based on the Eyring’s Theory and a Modified Gibbs Energy Model

Eyring’s absolute rate theory was applied for evaluation of the viscosity of ionic liquids (ILs) containing binary mixtures. Considering the mathematical simplicity of the two-suffix-margules model, the Gibbs energy model was further modified. Furthermore, for viscosity evaluation, the proposed Gibbs energy model was coupled with Eyring’s theory. To validate the accuracy of the proposed model, a large set of data containing the binary mixtures of 122 ILs with a total number of 5512 experimental data points was collected from the literature. Moreover, the average absolute relative deviation (AARD %) was obtained as 2.07 %. Also, the capability of the Eyring–MTSM model was tested for the prediction of viscosity for binary and ternary systems. Additionally, comparison of the proposed model with the Eyring–NRTL model indicated a higher accuracy for our model. Finally, the Eyring–UNIFAC model was also checked, and it was found that this model is not accurate enough in its present form

Carbon-Based Nanostructures as Emerging Materials for Gene Delivery Applications

Gene therapeutics are promising for treating diseases at the genetic level, with some already validated for clinical use. Recently, nanostructures have emerged for the targeted delivery of genetic material. Nanomaterials, exhibiting advantageous properties such as a high surface-to-volume ratio, biocompatibility, facile functionalization, substantial loading capacity, and tunable physicochemical characteristics, are recognized as non-viral vectors in gene therapy applications. Despite progress, current non-viral vectors exhibit notably low gene delivery efficiency. Progress in nanotechnology is essential to overcome extracellular and intracellular barriers in gene delivery. Specific nanostructures such as carbon nanotubes (CNTs), carbon quantum dots (CQDs), nanodiamonds (NDs), and similar carbon-based structures can accommodate diverse genetic materials such as plasmid DNA (pDNA), messenger RNA (mRNA), small interference RNA (siRNA), micro RNA (miRNA), and antisense oligonucleotides (AONs). To address challenges such as high toxicity and low transfection efficiency, advancements in the features of carbon-based nanostructures (CBNs) are imperative. This overview delves into three types of CBNs employed as vectors in drug/gene delivery systems, encompassing their synthesis methods, properties, and biomedical applications. Ultimately, we present insights into the opportunities and challenges within the captivating realm of gene delivery using CBNs

Sequential recovery of C-phycocyanin and chlorophylls from Anabaena cylindrica

Cyanobacteria are attracting the attention worldwide as a reliable and sustainable feedstock for the production of biofuels, food colorants and biochemically active compounds. Anabaena cylindrica (A. cylindrica) is a cya- nobacterium with a significant widespread occurrence in Portuguese freshwaters, with C-phycocyanin and chlorophylls, compounds with a high market value, being abundantly produced by the species. This work presents the development of a sequential downstream process to obtain C-phycocyanin and chlorophyll from A. cylindrica. The C-phycocyanin extraction is carried using Na-phosphate (20 mM, pH 7) buffer, while aqueous solutions of surface-active compounds (250 mM), as well as ethanol, were screened for the extraction of the chlorophylls. After selecting the best solvents to recover both pigments from A. cylindrica, the operational conditions (solid-liquid ratio, time of extraction and temperature) were optimized, allowing the recovery of around 90% and 55% of the total content of C-phycocyanin and chlorophylls, respectively. Finally, dextran/ copolymer-based ABS were applied to promote the purification of C-phycocyanin from the residual chlorophylls and other contaminant proteins, leading to an increase in the C-phycocyanin purity of 4-fold, without com- promising its photostability.publishe