1,806 research outputs found
Atmosphere Monitoring System in Chemistry Laboratory using WSN
The impact of air quality has to be taken into consideration especially when dealing with different chemical gases in an enclosed Chemistry Laboratory. Thus the monitoring of the environment or the air quality in the Chemistry Laboratory is essential to detect the amount of concentration of gases in the air so as to develop appropriate strategies to reduce the adverse effect of air quality on the health of people working in the laboratory. The Environment Monitoring System is designed using the Wireless Sensor Network technology. Wireless Sensor Network along with Internet of Things allows the use of various sensors to detect the environmental condition and to collect the sensor data thus permitting data integration. The system designed to monitor the environmental conditions in the Chemistry Laboratory is divided into three parts:1] Sensor node: That collects and transmits the sensor data to the central repository or the Sink node 2] Sink node: It is the core node in the network performing important functions like data storage, data collaboration, computing and data integration 3] Web Interface: Development of a Web application so as to provide access to the remote user to the sensor data and also for visualization of data in a systematic manner for further analysis. The system consists of sensor nodes designed using the Atmega328 microcontroller along with a nRF24l01 module for wireless communication and various analog sensors. The base station is designed by using the open source hardware Raspberry Pi, nRF24l01 module and analog sensors. A Web Server Interface is created to access the sensor data for the user. Â
New Chromogenic Spray Reagent for TLC Detection and Identification of Organophosphrous Insecticide Monocrotophos in Biological Material.
Monocrotophos is a member of Organophosphate insecticide. It is an important insecticide and has a diversified role in agriculture in INDIA. The increasing numbers of human poisoning cases were found to be occurred by the consumption of organophosphate insecticide monocrotophos. So in this paper, we represent a novel Thin Layer Chromatographic spray reagent for the detection and identification of Monocrotophos
Profit Analysis of a Warm Standby Non-Identical Units System with Single Server Subject to Priority
The present paper deals with the profit analysis of a warm standby non-identical (one is main unit another is duplicate unit) units system with single server. The model consists of two non-identical units –one is operative and the other kept as warm standby and one unit is sufficient to make the system in operative mode. The main unit may fail directly from normal mode and the warm standby unit can fail owing to remain unused for a longer period of time. There is a single server, who gives priority to repair of the main unit over the repair of the duplicate unit. The time is taken to repair activity by the server follows negative exponential distribution whereas the distributions of unit are taken as arbitrary with different probability density functions. The expressions of various efficiency measures are analyzed in steady state using semi-Markov process and regenerative point technique. Also, taking the arbitrary values for the parameters (i.e. ?, µ, ? and ?) to delineate the behavior of some important performance measures to check the efficacy of the system model under such situations shown in the graphs
Effect on strength of Involute spur gear tooth by considering Uncertainties in Geometry and Material propertiesby using Finite Element Methods-A Review
Gearing is the special division of Mechanical Engineering concerned with the transmission of power and motion between the rotating shafts. Gears not only transmit motion and enormous power satisfactorily, but can do so with very uniform motion. It is the best and the economical means of achieving this transmission. Gear teeth fail due to the static and the dynamic loads acting over it. This paper presents study of effect of various parameters on beam strength of involute spur gear tooth. The effect on strength of involute spur gear tooth is studied by considering uncertainties in geometric parameters like fillet radius, face width etc. Also the uncertainties in material properties which affect strength of involute spur gear tooth are studied
Back Pack Controlled Droplet Applicator (CDA) for Better Pesticide Application
This paper describes the construction of the Back-pack Controlled Droplet Appli-cator (CDA) and highlights its advantages over the hand-held CDA and other pesti-cide applicators. It also lists the instructions to be followed by the operator
Recovery Of Endosulfan From Pigeonpea, Chickpea, And Groundnut After Spraying With Different Appliances
The recovery from pigeonpea [Cajanus cajan], chickpea [Cicer arietinum] and groundnut following application of endosulfan at 1.16 g a.i./m² with a hand-operated knapsack sprayer (500 litres spray liquid/ha), a motorized knapsack sprayer (250 litres/ha) and a hand-held spinning disc controlled droplet applicator (CDA) (10 litres/ha) were determined in studies in Andhra Pradesh, India. The percentage recovery of endosulfan on all crops was higher with the CDA (79-85%) than with the motorized knapsack (60-73%) or the hand-held knapsack (38-57%)
Thermal stresses in functionally graded hollow sphere due to non-uniform internal heat generation
In this article, the thermal stresses in a hollow thick sphere of functionally graded material subjected to non-uniform internal heat generation are obtained as a function of radius to an exact solution by using the theory of elasticity. Material properties and heat generation are assumed as a function of radius of sphere and Poisson’s ratio as constant. The distribution of thermal stresses for different values of the powers of the module of elasticity and varying power law index of heat generation is studied. The results are illustrated numerically and graphically
Thermal stresses in an infinite body with spherical cavity due to an arbitrary heat flux on its internal boundary surface
In this paper we consider an elastic infinite body with a spherical cavity subjected to a arbitrary heat flux on its internal boundary which is assumed to be traction free. The displacement and thermal stresses are obtained and results are compared using constant and time dependent heat flux. Laplace transform technique is used to obtain the temperature distribution. The mathematical model is obtained for copper material. The results are illustrated numerically and graphically
Newer Initiatives under RNTCP
The Revised National Tuberculosis Control Program (RNTCP) has taken continuous efforts in addressing issues toward TB control in India. It has allowed India to take a huge leap in controlling TB. The program has been actively modifying its strategies according to latest scientific evidence and changing dynamics of the disease. These modifications provide a good ray of hope, if implemented effectively. These innovations will effectively leverage India’s endeavor
- …