1,595 research outputs found

    Evaluation of magnetic materials for static inverters and converters

    Get PDF
    Program studies materials for use in static inverters and converters. It gives suitable data on the behavior of commonly used materials when excited with square wave power

    CCD Measurements of Double and Multiple Stars at NAO Rozhen. IV

    Get PDF
    Using the 2 m telescope of the Bulgarian National Astronomical Observatory at Rozhen observations of 30 double or multiple stars were carried out during two half nights on July 20and 21, 2009. This is the fourth series of measurements of CCD frames of double and multiple stars obtained at Rozhen. In this paper we present the results for the position angle and separation for 23 double and 5 multiple stars (35 pairs) which could have been measured

    Influence of Altitude on Phytochemical Composition of Hemp Inflorescence: A Metabolomic Approach

    Get PDF
    The phytochemical profiling of hemp inflorescences of clonal plants growing in different conditions related to altitude was investigated. Four strains of industrial hemp (Cannabis sativa L., family Cannabaceae) of Kompolti variety were selected and cloned to provide genetically uniform material for analyses of secondary metabolites (terpenes, cannabinoids, and flavonoids) at two different elevations: mountain (Alagna Valsesia 1200 m ASL) and plains (Vercelli Province 130 m ASL). Environmental conditions influenced by elevation have proven to be important factors inducing variations in hemp inflorescences\u2019 secondary metabolite composition. In fact, all plants grown at altitude exhibited a higher total amount of terpenes when compared with plains counterparts, with \u3b2-Myrcene, trans-Caryophyllene and \u3b1-Humulene as the main contributors. A metabolomic, un-targeted approach performed by HPLC-Q-Exactive-Orbitrap\uae-MS platform with subsequent data processing performed by Compound DiscovererTM software, was crucial for the appropriate recognition of many metabolites, clearly distinguishing mountain from plains specimens. Cannabidiolic acid CBDA was the most abundant phytocannabinoid, with significantly higher concentrations in the mountain samples. The metabolic pathway of CBGA (considered as the progenitor/precursor of all cannabinoids) was also activated towards the production of CBCA, which occurs in considerably 3 times higher quantities than in the clones grown at high altitude. Isoprenoid flavones (Cannaflavins A, B, and C) were correspondingly upregulated in mountain samples, while apigenin turned out to be more abundant in plains samples. The possibility to use hemp inflorescences in pharmaceutical/nutraceutical applications opens new challenges to understand how hemp crops respond in terms of secondary metabolite production in various environments. In this regard, our results with the applied analytical strategy may constitute an effective way of phytochemical profiling hemp inflorescences

    Modelling and analyzing adaptive self-assembling strategies with Maude

    Get PDF
    Building adaptive systems with predictable emergent behavior is a challenging task and it is becoming a critical need. The research community has accepted the challenge by introducing approaches of various nature: from software architectures, to programming paradigms, to analysis techniques. We recently proposed a conceptual framework for adaptation centered around the role of control data. In this paper we show that it can be naturally realized in a reflective logical language like Maude by using the Reflective Russian Dolls model. Moreover, we exploit this model to specify and analyse a prominent example of adaptive system: robot swarms equipped with obstacle-avoidance self-assembly strategies. The analysis exploits the statistical model checker PVesta

    Copula Ordinal Regression for Joint Estimation of Facial Action Unit Intensity

    Get PDF
    Joint modeling of the intensity of facial action units (AUs) from face images is challenging due to the large number of AUs (30+) and their intensity levels (6). This is in part due to the lack of suitable models that can efficiently handle such a large number of outputs/classes simultaneously, but also due to the lack of labelled target data. For this reason, majority of the methods proposed so far resort to independent classifiers for the AU intensity. This is suboptimal for at least two reasons: the facial appearance of some AUs changes depending on the intensity of other AUs, and some AUs co-occur more often than others. Encoding this is expected to improve the estimation of target AU intensities, especially in the case of noisy image features, head-pose variations and imbalanced training data. To this end, we introduce a novel modeling framework, Copula Ordinal Regression (COR), that leverages the power of copula functions and CRFs, to detangle the probabilistic modeling of AU dependencies from the marginal modeling of the AU intensity. Consequently, the COR model achieves the joint learning and inference of intensities of multiple AUs, while being computationally tractable. We show on two challenging datasets of naturalistic facial expressions that the proposed approach consistently outperforms (i) independent modeling of AU intensities, and (ii) the state-ofthe-art approach for the target task

    Ratio of maximum hamstring torque to maximum quadriceps torque in professional basketball and soccer players

    Get PDF
    Purpose: The aim of the study was to determine the differences between football players and basketball players in the mean absolute values of maximum torque flexors and extensors, ratio of maximum hamstring torque to maximum quadriceps torque dominant (DOM) non-dominant (ND) leg and differences in bilateral imbalance of flexor muscles and knee extensors. Material and methods: The research included a sample of 39 professional athletes. The first subsample included 19 professional basketball players while the second subsample included 20 professional soccer players. Results: Based on the results of the torques of the extensors in the knee joint of the DOM and ND legs, it was established that there is no statistically significant difference between basketball players and football players. However, a statistically significant difference was found in the torque flexors of the knee joint DOM (p≤0.01) and ND (p≤0.00) of the leg between basketball players and football players. On the other hand, the results of the research indicate that the difference between basketball players and football players in the ratio of Hamstrings peak torque to Quadriceps peak torque was recorded only in the ND leg (p≤0.02), while the difference in the DOM leg is not statistically significant. The results of our study indicate that basketball players have a higher percentage of imbalances compared to football players, especially in m. hamstrings. Conclusion: This study provides normative data on populations specific to soccer and basketball, but does not provide evidence of the ability of the isokinetic assessment of lower extremity muscle strength to predict injuries to football players and basketball players

    Strength Analysis of Eight-Wheel Bogie of Bucket Wheel Excavator

    Get PDF
    Crawler travel gear is a type of heavy vehicle propulsion that is commonly found in tanks, excavators, and specialized off-road vehicles. They have an advantage over wheels when it comes to robust vehicle weight distribution over soft terrain, and some disadvantages as well. They can damage paved roads and have complex design so, considering the enormous weight they must carry, their reliability must be determined and verified. The main parts of the assembly are the drive wheels, which move the crawler, and the supporting structure that holds four-wheel bogies and two-wheel bogies. In this paper, we present a methodology for FEM analysis of parts of an eight-wheel bogie according to DIN 22261-2 standard

    Electric generation of vortices in an exciton-polariton superfluid

    Full text link
    We have theoretically demonstrated the on demand electric generation of vortices in an exciton-polariton superfluid. Electric pulses applied to a horseshoe-shaped metallic mesa, deposited on top of the microcavity, generate a non-cylindrically symmetric solitonic wave in the system. Breakdown of its wavefront at focal points leads to the formation of vortex-antivortex pairs which subsequently propagate in the superfluid. The trajectory of these vortex dipoles can be controlled by applying a voltage to additional electrodes. They can be confined within channels formed by metallic stripes and unbound by a wedged mesa giving birth to grey solitons. Finally single static vortices can be generated using a single metallic plate configuration.Comment: 7 pages and 7 figure

    Entangled photon pairs produced by a quantum dot strongly coupled to a microcavity

    Full text link
    We show theoretically that entangled photon pairs can be produced on demand through the biexciton decay of a quantum dot strongly coupled to the modes of a photonic crystal. The strong coupling allows to tune the energy of the mixed exciton-photon (polariton) eigenmodes, and to overcome the natural splitting existing between the exciton states coupled with different linear polarizations of light. Polariton states are moreover well protected against dephasing due to their lifetime ten to hundred times shorter than that of a bare exciton. Our analysis shows that the scheme proposed can be achievable with the present technology
    • …
    corecore