4,417 research outputs found
Preliminary Studies about Synthesis and Electrical Properties of Ruthenium Doped Lanthanum Strontium Titanate as a Potential Anode of Solid Oxide Fuel Cells
The lanthanum strontium titanate (LST) is one of the most representative alternative anode materials. Although it shows low catalytic properties, the disadvantage could be improved by doping of ruthenium which is widely used as catalyst under steam reforming reaction or oxidation reaction. The ruthenium doped lanthanum strontium titanates (LSTRs) powders were synthesized by complex EDTA-citrate method showing well crystallinity. Additionally, the prepared samples were evaluated through various experimental tests. For example, the stability in the reducing atmosphere and chemical compatibility with YSZ electrolyte such as reactivity test in high temperature were confirmed by XRD (X-ray diffraction). And electrical conductivity in wet H-2 atmosphere at 900 degrees C is about 350.6 S/cm, 342.4 S/cm and 179.1 S/cm with sintered bar of LST, LSTR0.02 and LSTR0.05, respectively.open1111Nsciescopu
Performance of an Anode Supported Solid Oxide Fuel Cell with Indirect Internal Reforming
The conversion of fuel into hydrogen-rich gas is necessary for fuel cells. This can be achieved either indirectly in fuel processing systems, in which the hydrocarbon feed is converted in an external catalytic steam reformer, or directly in the fuel cell. In this paper, the unit module of solid oxide fuel cell was assembled by one reformer and four cells. The reformer was fabricated by extruded dummy cell and combined with two cells on each side respectively. The reforming catalyst was coated on internal channel of the dummy cell. The unit module has successfully tested with wet CH4 as fuel and air as oxidant and its maximum power density exceeded 150mW/cm(2) at 750 degrees C.open110Nsciescopu
Design and Fabrication of Electrolyte-Supported Tubular SOFC Combined with Supercritical Water Oxidation on Biomass Gas
Solid oxide fuel cells (SOFCs) are relatively simple and environmental friendly devices for the production of electricity from hydrocarbons. The use of a high pressure supercritical water (SCW) reactor containing a SOFC has the potential for using a multitude of logistical liquid fuels that would otherwise not be possible in a regular SOFC system. A SOFC-SCW system was designed to allow the anode to be exposed to the pressure and chemical milieu of the supercritical water oxidation reactor. The effects of the amount of water/fuel and oxygen fed into the reactor under SCW conditions at 400 degrees C were studied. The effects on electrochemical performance as well as preliminary results on a number of feed stocks, for example pectin, are also described.open1111Nsciescopu
Effect of amorphous Si quantum-dot size on 1.54 μm luminescence of Er
The role of the size of amorphous silicon quantum dots in the Er luminescence at 1.54 μm was investigated. As the dot size was increased, more Er ions were located near one dot due to its large surface area and more Er ions interacted with other ones. This Er-Er interaction caused a weak photoluminescence intensity, despite the increase in the effective excitation cross section. The critical dot size needed to take advantage of the positive effect on Er luminescence is considered to be about 2.0 nm, below which a small dot is very effective in the efficient luminescence of Er. © 2005 The Electrochemical Society. All rights reserved
Recommended from our members
Structural evaluation of WIPP disposal room raised to Clay Seam G.
An error was discovered in the ALGEBBRA script used to calculate the disturbed rock zone around the disposal room and the shear failure zone in the anhydrite layers in the original version. To correct the error, a memorandum of correction was submitted according to the Waste Isolation Pilot Plant (WIPP) Quality Assurance program. The recommended course of action was to correct the error, to repeat the post-process, and to rewrite Section 7.4, 7.5, 8, and Appendix B in the original report. The sections and appendix revised by the post-process using the corrected ALGEBRA scripts are provided in this revision. The original report summarizes a series of structural calculations that examine effects of raising the WIPP repository horizon from the original design level upward 2.43 meters. Calculations were then repeated for grid changes appropriate for the new horizon raised to Clay Seam G. Results are presented in three main areas: (1) Disposal room porosity, (2) Disturbed rock zone characteristics, and (3) Anhydrite marker bed failure. No change to the porosity surface for the compliance re-certification application is necessary to account for raising the repository horizon, because the new porosity surface is essentially identical. The disturbed rock zone evolution and devolution are charted in terms of a stress invariant criterion over the regulatory period. This model shows that the propagation of the DRZ into the surrounding rock salt does not penetrate through MB 139 in the case of both the original horizon and the raised room. Damaged salt would be expected to heal in nominally 150 years. The shear failure does not occur in either the upper or lower anhydrite layers at the moment of excavation, but appears above and below the middle of the pillar one day after the excavation. The damaged anhydrite is not expected to heal as the salt in the DRZ is expected to
Photocurrent measurements of supercollision cooling in graphene
The cooling of hot electrons in graphene is the critical process underlying
the operation of exciting new graphene-based optoelectronic and plasmonic
devices, but the nature of this cooling is controversial. We extract the hot
electron cooling rate near the Fermi level by using graphene as novel
photothermal thermometer that measures the electron temperature () as it
cools dynamically. We find the photocurrent generated from graphene
junctions is well described by the energy dissipation rate , where the heat capacity is and is the
base lattice temperature. These results are in disagreement with predictions of
electron-phonon emission in a disorder-free graphene system, but in excellent
quantitative agreement with recent predictions of a disorder-enhanced
supercollision (SC) cooling mechanism. We find that the SC model provides a
complete and unified picture of energy loss near the Fermi level over the wide
range of electronic (15 to 3000 K) and lattice (10 to 295 K) temperatures
investigated.Comment: 7pages, 5 figure
Canalization of the evolutionary trajectory of the human influenza virus
Since its emergence in 1968, influenza A (H3N2) has evolved extensively in
genotype and antigenic phenotype. Antigenic evolution occurs in the context of
a two-dimensional 'antigenic map', while genetic evolution shows a
characteristic ladder-like genealogical tree. Here, we use a large-scale
individual-based model to show that evolution in a Euclidean antigenic space
provides a remarkable correspondence between model behavior and the
epidemiological, antigenic, genealogical and geographic patterns observed in
influenza virus. We find that evolution away from existing human immunity
results in rapid population turnover in the influenza virus and that this
population turnover occurs primarily along a single antigenic axis. Thus,
selective dynamics induce a canalized evolutionary trajectory, in which the
evolutionary fate of the influenza population is surprisingly repeatable and
hence, in theory, predictable.Comment: 29 pages, 5 figures, 10 supporting figure
Acute small bowel obstruction as a result of a Meckel's diverticulum encircling the terminal ileum: A case report
BACKGROUND: In the developed world, small bowel obstruction accounts for 20% of all acute surgical admissions. The aetiology for majority of these cases includes postoperative adhesions and herniae. However, a relatively uncommon cause is a Meckel's diverticulum. Although this diagnosis is primarily reported in the adolescent population, it should also be considered in adults. CASE PRESENTATION: In the present report, we present a rare case where a fit and healthy 74-year-old gentleman, with no previous history of abdominal surgery, presented with the cardinal symptoms and signs of small bowel obstruction as the result of a Meckel's diverticulum encircling his terminal ileum. Initial investigations included a supine abdominal x-ray showing dilated loops of small bowel and computerised tomographic imaging of the abdomen, which revealed a stricture in the terminal ileum of unknown aetiology. At laparotomy, multiple loops of distended small bowel were seen from the duodeno-jeujenal junction to the terminal ileum, which was encircled by a Meckel's diverticulum. The Meckel's diverticulum was then divided to release the obstruction, mobilised and subsequently removed. Finally, the small bowel contents were decompressed into the stomach and the nasogastric tube aspirated, before returning the loops of bowel into the abdomen in sequence. The patient made a good postoperative recovery and was discharged home 5 days later. CONCLUSION: This report highlights the importance of considering a Meckel's diverticulum as a cause of small bowel obstruction in individuals from all age groups and especially in a person with no previous abdominal pathology or surgery
Early and efficient detection of Mycobacterium tuberculosis in sputum by microscopic observation of broth cultures.
Early, efficient and inexpensive methods for the detection of pulmonary tuberculosis are urgently needed for effective patient management as well as to interrupt transmission. These methods to detect M. tuberculosis in a timely and affordable way are not yet widely available in resource-limited settings. In a developing-country setting, we prospectively evaluated two methods for culturing and detecting M. tuberculosis in sputum. Sputum samples were cultured in liquid assay (micro broth culture) in microplate wells and growth was detected by microscopic observation, or in Löwenstein-Jensen (LJ) solid media where growth was detected by visual inspection for colonies. Sputum samples were collected from 321 tuberculosis (TB) suspects attending Bugando Medical Centre, in Mwanza, Tanzania, and were cultured in parallel. Pulmonary tuberculosis cases were diagnosed using the American Thoracic Society diagnostic standards. There were a total of 200 (62.3%) pulmonary tuberculosis cases. Liquid assay with microscopic detection detected a significantly higher proportion of cases than LJ solid culture: 89.0% (95% confidence interval [CI], 84.7% to 93.3%) versus 77.0% (95% CI, 71.2% to 82.8%) (p = 0.0007). The median turn around time to diagnose tuberculosis was significantly shorter for micro broth culture than for the LJ solid culture, 9 days (interquartile range [IQR] 7-13), versus 21 days (IQR 14-28) (p<0.0001). The cost for micro broth culture (labor inclusive) in our study was US 11.35 per sample for the LJ solid culture. The liquid assay (micro broth culture) is an early, feasible, and inexpensive method for detection of pulmonary tuberculosis in resource limited settings
- …