The conversion of fuel into hydrogen-rich gas is necessary for fuel cells. This can be achieved either indirectly in fuel processing systems, in which the hydrocarbon feed is converted in an external catalytic steam reformer, or directly in the fuel cell. In this paper, the unit module of solid oxide fuel cell was assembled by one reformer and four cells. The reformer was fabricated by extruded dummy cell and combined with two cells on each side respectively. The reforming catalyst was coated on internal channel of the dummy cell. The unit module has successfully tested with wet CH4 as fuel and air as oxidant and its maximum power density exceeded 150mW/cm(2) at 750 degrees C.open110Nsciescopu
