Enhanced TDMA Based Anti-Collision Algorithm with a Dynamic Frame Size Adjustment Strategy for Mobile RFID Readers

In the fields of production, manufacturing and supply chain management, Radio Frequency Identification (RFID) is regarded as one of the most important technologies. Nowadays, Mobile RFID, which is often installed in carts or forklift trucks, is increasingly being applied to the search for and checkout of items in warehouses, supermarkets, libraries and other industrial fields. In using Mobile RFID, since the readers are continuously moving, they can interfere with each other when they attempt to read the tags. In this study, we suggest a Time Division Multiple Access (TDMA) based anti-collision algorithm for Mobile RFID readers. Our algorithm automatically adjusts the frame size of each reader without using manual parameters by adopting the dynamic frame size adjustment strategy when collisions occur at a reader. Through experiments on a simulated environment for Mobile RFID readers, we show that the proposed method improves the number of successful transmissions by about 228% on average, compared with Colorwave, a representative TDMA based anti-collision algorithm

Forage Rye Cultivars for Animal Feed in Korea

Rye (Secale cereal L.) is well known for its overwintering ability and has the highest tolerance to cold temperature of the small grain cereals such as wheat, barley, and oat. Rye is used as livestock pasture and as green manure in Korea, and its cultivation area for fodder is about 50,000 ha in 2014. Most rye is grown as a fall-sown annual crop, generally called “winter rye”. In Korea, rye cultivation for whole crop silage (WCS) in the winter-season rice field can be considered as a promising way to enhance feed supply. The WCS production can be an efficient way to use farm products as livestock feed, and it can also contribute to increasing farm income. Although rye is inferior in several ways to the predominant cereal crops (wheat, rice, and maize), it will continue to be an important crop for farmers in Korea because of its winter hardiness and early harvesting by rapid growing ability

A Study of Parameters Related to the Etch Rate for a Dry Etch Process Using NF 3

The characteristics of the dry etching of SiNx:H thin films for display devices using SF6/O2 and NF3/O2 were investigated using a dual-frequency capacitively coupled plasma reactive ion etching (CCP-RIE) system. The investigation was carried out by varying the RF power ratio (13.56 MHz/2 MHz), pressure, and gas flow ratio. For the SiNx:H film, the etch rates obtained using NF3/O2 were higher than those obtained using SF6/O2 under various process conditions. The relationships between the etch rates and the usual monitoring parameters—the optical emission spectroscopy (OES) intensity of atomic fluorine (685.1 nm and 702.89 nm) and the voltages VH and VL—were investigated. The OES intensity data indicated a correlation between the bulk plasma density and the atomic fluorine density. The etch rate was proportional to the product of the OES intensity of atomic fluorine (I(F)) and the square root of the voltages (Vh+Vl) on the assumption that the velocity of the reactive fluorine was proportional to the square root of the voltages

Akt regulates the expression of MafK, synaptotagmin I, and syntenin-1, which play roles in neuronal function

<p>Abstract</p> <p>Background</p> <p>Akt regulates various cellular processes, including cell growth, survival, and metabolism. Recently, Akt's role in neurite outgrowth has also emerged. We thus aimed to identify neuronal function-related genes that are regulated by Akt.</p> <p>Methods</p> <p>We performed suppression subtractive hybridization on two previously established PC12 sublines, one of which overexpresses the wild-type (WT) form and the other, the dominant-negative (DN) form of Akt. These sublines respond differently to NGF's neuronal differentiation effect.</p> <p>Results</p> <p>A variety of genes was identified and could be classified into several functional groups, one of which was developmental processes. Two genes involved in neuronal differentiation and function were found in this group. v-Maf musculoaponeurotic fibrosarcoma oncogene homolog K (MafK) induces the neuronal differentiation of PC12 cells and immature telencephalon neurons, and synaptotagmin I (SytI) is essential for neurotransmitter release. Another gene, <it>syntenin-1 </it>(<it>Syn-1</it>) was also recognized in the same functional group into which <it>MafK </it>and <it>SytI </it>were classified. Syn-1 has been reported to promote the formation of membrane varicosities in neurons. Quantitative reverse transcription polymerase chain reaction analyses show that the transcript levels of these three genes were lower in PC12 (WT-Akt) cells than in parental PC12 and PC12 (DN-Akt) cells. Furthermore, treatment of PC12 (WT-Akt) cells with an Akt inhibitor resulted in the increase of the expression of these genes and the improvement of neurite outgrowth. These results indicate that dominant-negative or pharmacological inhibition of Akt increases the expression of <it>MafK</it>, <it>SytI</it>, and <it>Syn-1 </it>genes. Using lentiviral shRNA to knock down endogenous Syn-1 expression, we demonstrated that Syn-1 promotes an increase in the numbers of neurites and branches.</p> <p>Conclusions</p> <p>Taken together, these results indicate that Akt negatively regulates the expression of <it>MafK</it>, <it>SytI</it>, and <it>Syn-1 </it>genes that all participate in regulating neuronal integrity in some way or another.</p

Synergetic strengthening of layered steel sheet investigated using an in situ neutron diffraction tensile test

Synergetic strengthening induced by plastic strain incompatibility at the interface, and the resulting extra geometrically necessary dislocations (GNDs) generated during plastic deformation, were investigated to understand the origin of extra strength in heterogeneous structured (HS) materials. The mechanism of extra GND generation in twinning-induced plasticity (TWIP)-interstitial free (IF) steel layered sheet was quantitatively analyzed by conducting in situ neutron scattering tensile test. Load partitioning due to the different mechanical properties between the TWIP-steel core and IF-steel sheath at the TWIP/IF interface was observed during the in situ tensile testing. Because of the plastic strain incompatibility from load partitioning, extra GNDs are generated and saturate during tensile deformation. The extra GNDs can be correlated with the back-stress evolution of the HS materials, which contributes to the strength of layered materials. Because of the back-stress evolution caused by load partitioning, the strength of TWIP-IF layered steel is higher than the strength estimated by the rule-of-mixtures. This finding offers a mechanism by which extra GNDs are generated during load partitioning and shows how they contribute to the mechanical properties of HS materials.11Ysciescopu

Characteristics of Ba(Zr0.1Ce0.7Y0.2)O3-δ nano-powders synthesized by different wet-chemical methods for solid oxide fuel cells

This research was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (NRF-2017R1A6A3A03004416) and (NRF-2015M1A2A2056833).Ba(Zr0.1Ce0.7Y0.2)O3-δ nano-particles were prepared by different wet-chemical synthesis, Pechini (BZCY(P)) and co-precipitation (BZCY(C)), respectively. The BZCY(C) powders have a particle size in range of about 50~150 nm, which is smaller than the BZCY(P) powders with about 500~900 nm. Both the BZCY materials show perovskite structures, but there are impurities in the BZCY (P). Moreover, the electrolyte density was higher in the BZCY (C) than the BZCY (P). The single cells with BZCY (C) electrolytes exhibited about 0.23 W cm−2 at 600 °C and about 0.31 W cm−2 at the same temperature were obtained when the anode-functional layer was introduced between the anode and electrolyte. Thus, the BZCY prepared by carbonate-derived co-precipitation method can be more favorable for high-purity and dense electrolytes in the solid oxide fuel cells than the BZCY prepared by Pechini method.PostprintPeer reviewe

Pure Sensory Deficit at the T4 Sensory Level as an Isolated Manifestation of Lateral Medullary Infarction

In rare cases restricted sensory deficits along the somatotopic topography of the spinothalamic tract can develop from a lateral medullary infarction. To our knowledge, isolated dermatomal sensory deficit as a single manifestation of a lateral medullary infarction has not been reported previously. A 58-year-old man presenting with sudden left-sided paresthesia complained of sensory deficit of pain and temperature below the left T4 sensory level without other neurologic deficits. Diffuse- and T2-weighted magnetic resonance imaging (MRI) of the brain showed high signal intensities in the right lower medulla oblongata, whereas thoracic-spine MRI and somatosensory evoked potentials produced normal findings