8,565 research outputs found
Inverse design technique for cascades
A numerical technique to generate cascades is presented. The basic prescribed parameters are: inlet angle, exit pressure, and distribution of blade thickness and lift along a blade. Other sets of parameters are also discussed. The technique is based on the lambda scheme. The problem of stability of the computation as a function of the prescribed set of parameters and the treatment of boundary conditions is discussed. A one dimensional analysis to indicate a possible way for assuring stability for any two dimensional calculation is provided
A recursive-faulting model of distributed damage in confined brittle materials
We develop a model of distributed damage in brittle materials deforming in triaxial compression based on the explicit construction of special microstructures obtained by recursive faulting. The model aims to predict the effective or macroscopic behavior of the material from its elastic and fracture properties; and to predict the microstructures underlying the microscopic behavior. The model accounts for the elasticity of the matrix, fault nucleation and the cohesive and frictional behavior of the faults. We analyze the resulting quasistatic boundary value problem and determine the relaxation of the potential energy, which describes the macroscopic material behavior averaged over all possible fine-scale structures. Finally, we present numerical calculations of the dynamic multi-axial compression experiments on sintered aluminum nitride of Chen and Ravichandran [1994. Dynamic compressive behavior of ceramics under lateral confinement. J. Phys. IV 4, 177–182; 1996a. Static and dynamic compressive behavior of aluminum nitride under moderate confinement. J. Am. Soc. Ceramics 79(3), 579–584; 1996b. An experimental technique for imposing dynamic multiaxial compression with mechanical confinement. Exp. Mech. 36(2), 155–158; 2000. Failure mode transition in ceramics under dynamic multiaxial compression. Int. J. Fracture 101, 141–159]. The model correctly predicts the general trends regarding the observed damage patterns; and the brittle-to-ductile transition resulting under increasing confinement
Frictional Collisions Off Sharp Objects
This work develops robust contact algorithms capable of dealing with multibody nonsmooth contact
geometries for which neither normals nor gap functions can be defined. Such situations arise
in the early stage of fragmentation when a number of angular fragments undergo complex collision
sequences before eventually scattering. Such situations precludes the application of most contact
algorithms proposed to date
Controllability of a viscoelastic plate using one boundary control in displacement or bending
In this paper we consider a viscoelastic plate (linear viscoelasticity of the
Maxwell-Boltzmann type) and we compare its controllability properties with the
(known) controllability of a purely elastic plate (the control acts on the
boundary displacement or bending). By combining operator and moment methods, we
prove that the viscoelastic plate inherits the controllability properties of
the purely elastic plate
Evolutionary impacts of fishing: overfishing's ‘Darwinian debt’
Human harvesting of fish results in far greater mortality than natural causes, with enormous potential to affect the phenotypic traits of fish populations, even after exploitation stops. Central to understanding these effects is the untangling of the genetic versus environmental components of phenotypic response. Evolutionary consequences of harvesting must be incorporated into conservation and management strategies
Evolution of the fine-structure constant in runaway dilaton models
We study the detailed evolution of the fine-structure constant in
the string-inspired runaway dilaton class of models of Damour, Piazza and
Veneziano. We provide constraints on this scenario using the most recent
measurements and discuss ways to distinguish it from alternative
models for varying . For model parameters which saturate bounds from
current observations, the redshift drift signal can differ considerably from
that of the canonical CDM paradigm at high redshifts. Measurements of
this signal by the forthcoming European Extremely Large Telescope (E-ELT),
together with more sensitive measurements, will thus dramatically
constrain these scenarios.Comment: 11 pages, 4 figure
Modelling and solutions to the linear stability of a detonation wave in the kinetic frame
Artigo publicado num número especial da revista.The analysis of linear stability of a steady detonation wave
is formulated for the first time at the kinetic level in the frame
of the Boltzmann equation extended to reacting gases. Within
this context and for a reversible reaction, the stability problem is carried out,
in agreement with most classical papers on gas detonation, through a normal mode approach
for the one-dimensional disturbances of the steady wave solution, and an
acoustic radiation condition at the final equilibrium as closure condition.
The proposed modelling leads to an initial value problem,
constituted by the linearized reactive Euler equations in the perturbed shock frame
with related Rankine-Hugoniot conditions, which can be solved by
means of a proper numerical technique.
An application is provided for an elementary bimolecular reaction.Centro de Matemática da Universidade do MinhoFundação para a Ciência e a Tecnologia (FCT)Italian INDAM-GNF
Kinetic approach to transport properties of a reacting gas
A multicomponent reacting gas with reversible reactions is studied
at a kinetic level with the main objective of deriving the
reactive Navier-Stokes equations
in dependence on the macroscopic variables,
and characterizing the dissipative terms related to
shear viscosity, heat conduction and thermal diffusion.
A step-by-step procedure, which can be applied to a quite large variety of
reactive flows, is proposed in order to identify the transport coefficients,
basically resorting to a first-order density approximation of Chapman-Enskog type.Fundação para a Ciência e Tecnologia (FCT) - Programa Operacional "Ciência, Tecnologia, Inovação" (POCTI).National Research Project PRIN 2003
Statistical characterization of the anisotropic strain energy in soft materials with distributed fibers
We discuss analytical and numerical tools for the statistical characterization of the anisotropic strain energy density of soft hyperelastic materials embedded with fibers. We consider spatially distributed orientations of fibers following a tridimensional or a planar architecture. We restrict our analysis to material models dependent on the fourth pseudo-invariant I4 of the Cauchy-Green tensor, and to exponential forms of the fiber strain energy function Ψaniso. Under different loading conditions, we derive the closed-form expression of the probability density function for I4 and Ψaniso. In view of bypassing the cumbersome extension-contraction switch, commonly adopted for shutting down the contribution of contracted fibers in models based on generalized structure tensors, for significant loading conditions we identify analytically the support of the fibers in pure extension. For uniaxial loadings, the availability of the probability distribution function and the knowledge of the support of the fibers in extension yield to the analytical expression of average and variance of I4 and Ψaniso, and to the direct definition of the average second Piola-Kirchhoff stress tensor. For generalized loadings, the dependence of I4 on the spatial orientation of the fibers can be analyzed through angle plane diagrams. Angle plane diagrams facilitate the assessment of the influence of the pure extension condition on the definition of the stable support of fibers for the statistics related to the anisotropic strain energy density. © 2015 Elsevier Ltd. All rights reserved
- …