Seismic Isolation of Building-Equipment System Using Modified Variable Friction Pendulum System

In this study, building-equipment system with Modified Variable Friction Pendulum System (MVFPS) is investigated under different earthquake ground excitations. Earthquake response of building-equipment system isolated with MVFPS is compared with Variable Friction Pendulum System (VFPS) and Friction Pendulum System (FPS) in order to find efficiency of MVFPS. Newmark’s linear acceleration method is used for solving governing equation of motion for building-equipment system. In this investigation, different storey buildings are considered. It is observed that MVFPS is more efficient in reducing the recoverable energy than FPS, but less efficient than VFPS. From the comparative study, it is found that FPS shows robust performance in comparison to MVFPS and VFPS in reducing equipment acceleration and displacement

Comparative Study of Seismic Analysis of Pier Supported on Pile as per IRC:6-2017 and IRC SP:114-2018

This paper depicts the study of seismic analysis of reinforced concrete bridge piers as per provisions of Indian Road Congress (IRC) guidelines. Bridges are designed having two main structural elements named – “Superstructure” and “Substructure”. Superstructure consists of deck and supporting girder/truss system below deck. Substructure includes Abutments, Piers, Portals and Foundations. Amongst these, Abutments/Piers are crucial part of bridge. Therefore, as per the seismic design philosophy, it is necessary to study the seismic behaviour of bridge piers. With the advancements in technology and subsequent researches in Infrastructure fields, IRC guidelines are updated and revised time-to-time. Introduction of IRC SP:114-2018 guideline for earthquake forces in bridges is an example of such developments. In this research, seismic analysis of Reinforced Cement Concrete (RCC) bridge pier is carried out as per provisions of prevailing guideline IRC:6-2017. Base shear value of IRC:6-2017 is compared with IRC SP:114-2018 which now supersedes seismic provisions of IRC:6-2017. For analysis, different span lengths of 25 m, 30 m and 36 m are used. To assess the impact of height of piers in earthquake analysis, various pier heights such as 10 m, 20 m and 30 m are assumed. The analysis is carried out as per Elastic Seismic Acceleration Method with consideration of different zones and importance of the bridge as per IRC guidelines. Effect of vertical ground motion is also considered in analysis. From analysis, it is observed that base shear and vertical forces have been increased remarkably as per IRC SP:114-2018 compared to IRC:6-2017

Design of Lean to Roof Steel Trusses with Hollow Circular tube using IS 875 (part-III):2015 & IS 800:2007

At present, SP-38:1987 is available which provides design for lean to roof type trusses and pitch roof trusses. The design of lean to roof truss has been carried out as per IS 800:1984 IS 875 (Part-III):1964. Afterwards IS 800:1984 is revised in 2007, which is based on limit state method. Also, IS 875 (Part-III) is updated in 1987 and then in 2015 considering climate changes and economical parameters. Accordingly, study has been done to revise the design of trusses given in SP-38:1987. In the present study, design and comparison of lean to roof type truss with steel circular hollow tube section have been carried out using IS 875 (Part-III):2015 and IS 800:2007 limit state method using STAAD Pro. and their results compared with SP-38:1987 results. This study includes lean to roof truss system considering different parameters like span, spacing of truss, slope of roof and wind zones with all cases of wind load. At the end, a compiled report will be prepared, which will be helpful to design engineers to provide economic, easier, faster approach for designing of steel trusses

Study of metformin in polycystic ovary syndrome

Background: Objective of the study was to measure the efficacy and safety of insulin sensitizing drug metformin in reversing the metabolic and endocrine disturbances in fifty women with polycystic ovarian disease.Methods: The study was performed on 57 women with polycystic ovarian syndrome (PCOS) in the outpatient department of obstetrics and gynaecology, V. S. General Hospital, Ahmedabad. Metformin 500 mg thrice daily was given until the cysts disappeared which was taken as the end point of the study. Follicular studies were done to check the effect of metformin on ovulation. Significance was tested by paired t test and p value calculated.Results: Metformin was found effective in regressing polycystic changes in ovary, regularization of menstrual cycles and improving ovulation.Conclusions: The present study shows that metformin has a beneficial role in effective management of PCOS.

Structure, Optical And Electrical Characterization Of Tin Selenide Thin Films Deposited At Room Temperature Using Thermal Evaporation Method

Tin Selenide (SnSe) is an important IV-VI compound semiconducting material used for various devices like memory switching, an efficient solar cell and holographic recording systems. SnSe thin films of the thickness of 100 nm were deposited by thermal evaporation method on a Glass substrate at room temperature. The prepared samples were investigated for structural, compositional, morphological and optical characte-rization respectively by using X-ray diffraction analysis (XRD), scanning electron microscopy (SEM) and transmission measurements. Thus deposited films showed a good polycrystalline quality having preferred (111) orientation with uniformly distributed spherical grains having size 16nm.The grown film identified as P- types by hot probe method. The films were found to have direct band transition having an optical bandgap (Eg) of 1.92 eV at room temperature. The temperature depended electrical resistivity (ρ) determined by using the two probe method, found to be 390 Ω·m at room temperature. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/952

A comparative study of single versus repeat instillation of intravaginal prostaglandin E2 gel for induction of labour

Background: The aim of induction was to achieve successful vaginal delivery where continuation of pregnancy is not desirable. Unfavourable cervix is one of the main causes of failed induction. Introduction of intravaginal prostaglandins E2 has revolutionised the method of cervical ripening. More than one dose of prostaglandin E2 (PGE2) gel may be necessary to facilitate cervical ripening and increase the chances of vaginal delivery.Methods: This retrospective study was done to find the efficacy of repeat instillation of intravaginal PGE2 gel and to compare the maternal and fetal outcome between the single instillation group and repeat instillation group. The women who went into labour or achieved cervical ripening with a single instillation of PGE2 gel forms Group A. Those who required repeat instillation of PGE2 gel forms Group B. Both groups were compared for specific parameters.Results: Primigravidas required repeat instillation. Postdated pregnancy was the most common indication for induction of labour. 45.2% of primis required only single dose and 54.8% required repeat dose. About two third (77.8%) of multipara required only one dose and a third of multipara needed repeat dose. In Group A 90.7% had vaginal delivery, 9.3% had Caesarean section. Group B 95.7% had vaginal delivery and 4.3% had Caesarean section.Conclusions: Prostaglandins PGE2 (0.5 mg) gel is recommended to be used intravaginally. We applied 2 doses of intravaginal PGE2, 24 hours apart and no complications like uterine hyperstimulation was seen. There is no increased fetal risk with repeat instillation of intravaginal PGE2 gel

Maternal outcome in pregnancy with thrombocytopenia

Background: Thrombocytopenia is second most common haematological abnormality in pregnancy after anemia. The aim of this study was to find out the prevalence, causative factor of thrombocytopenia and to observe the obstetrics outcome of pregnancies complicated with thrombocytopenia.Methods: This is prospective study of maternal outcome in pregnancy with thrombocytopenia carried out at tertiary care center from February 2019 to January 2020. Out of 350 antenatal screened women, 25 women who were diagnosed with thrombocytopenia, were included in the study.Results: The incidence of maternal thrombocytopenia in this study was 7.1%. 60% of the women had mild thrombocytopenia while 24% and 16% of women were moderate and severe thrombocytopenic respectively. Amongst 25 thrombocytopenic women 68% had gestational thrombocytopenia, 24% had gestational hypertensive disorder,4% had HELLP syndrome, 4% had immune thrombocytopenic purpura. 60% were delivered vaginally and 40% were delivered by LSCS. The most common indication of LSCS was acute fetal distress (40%) followed by failed induction (30%), breech (10%), and the rest (20%) for other obstetrical indications. The most common indication for induction was pre-eclampsia followed by IUGR, and post-date.Conclusions: In pregnancy with thrombocytopenia, gestational thrombocytopenia is the commonest and benign condition which does not alter the obstetrical management. Still a vigil 4 should be kept on maternal platelet count in antenatal period to prevent unfavorable outcome in serious conditions that may require specific and urgent management (HELLP syndrome, severe pre-eclampsia, ITP)