90 research outputs found

    Photothermal deflection determination of iron(II) with ferrozine with sorption preconcentration on silufol plates

    Get PDF
    Photothermal deflection spectroscopy was applied to the selective detection of iron(II) chelate with ferrozine by its sorption preconcentration on Silufol plates. The linearity range was 1 × 10-11-6 × 10 -8 mol cm-2 of chelate at the plate surface, which corresponded to 1 × 10-9 × 10-6 M of chelate in solution. The limits of detection and quantification are 8 × 10 -12 and 2.5 × 10-11 mol cm-2 at the plate from 15 μL of test solution (0.5 nM and 1.5 nM in solution, respectively), and the absolute detection limit is 8 fmol in the whole spot applied to a plate. Characteristics and features of photothermal deflection detection are discussed. © 2008 Society for Applied Spectroscopy

    Two-particle decays of B_c meson into charmonium states

    Full text link
    The factorization of hard and soft contributions into the hadronic decays of B_c meson at large recoils is explored in order to evaluate the decay rates into the S, P and D-wave charmonia associated with rho and pi. The constraints of approach applicability and uncertainties of numerical estimates are discussed. The mode with the J/psi in the final state is evaluated taking into account the cascade radiative electromagnetic decays of excited P-wave states, that enlarges the branching ratio by 20-25%.Comment: 13 pages, LaTeX axodraw-style, 1 figure, 2 table

    РАЗРАБОТКА ОРГАНОЛЕПТИЧЕСКОЙ МЕТОДИКИ КОНТРОЛЯ СТЕПЕНИ ИЗМЕЛЬЧЕНИЯ ЛАБОРАТОРНЫХ ПРОБ ЗОЛОТОСОДЕРЖАЩИХ РУД

    Get PDF
    The sample preparation of gold-bearing ores for the analysis is an important part of the gold fields’ chemical approbation. One of the operations in sample preparation is a control of the size of sample particles. Traditional sieve method to control the particle size is labor intensive and has low rapidity. In addition, the modern equipment for the particle-size analysis is of high cost. In order to implement a cheap, simple and express method to control the particle size of gold-bearing ores in production laboratories this paper presents an algorithm to control the crushing ratio of laboratory samples of gold-bearing ores. Using this new method, it is first necessary to carefully mix a fine sample and to spread it on a smooth surface of the table to form a layer of 5-7 mm thick, and then divide it into approximately equal squares. After this, an operator rubs the sample material with a finger at the control points, immersing the finger in the material until the contact with the polymeric film is made. If at the same time between the film and the finger there will be a sample particle with the size of 0.08-0.1 mm, the operator will have a steady I type tactile sensation (the sensation of the "fine sand"). If at the same time between the film and the finger there will be a sample particle with the size of more than 0.1 mm and less than 0.2 mm, the operator will feel a steady II type tactile sensation (the sensation of the separate grains). This procedure allows controlling the quality of the sample preparation. To control the crushing ratio of gold-bearing ores used in the routine analysis it is enough to use 9 control points. The developed algorithm of the organoleptic method to control the crushing quality was checked on a large group of samples, and its results agreed nicely with the results received using the classical sieve method. Using the organoleptic method, the quickness of control increases and the labor input of control decreases in comparison to the sieve method.         Key words: organoleptic method, crushing ratio of laboratory samples, control of powder size, gold-bearing oresDOI: http://dx.doi.org/10.15826/analitika.2016.20.4.004 О.А. Belavina1, V.А. Shvetsov1, V.V. Pakhomova2, D.V. Shun'kin1 Kamchatka State Technical University, ul. Kliuchevskaia, 35, Petropavlovsk-Kamchatskii, 683003, Russian FederationJSC «Kamchatgeology», Russian Federation, ul. Mishennaia, 106, Petropavlovsk-Kamchatskii, 683016, Russian FederationПодготовка проб золотосодержащих руд к анализу является важной составляющей частью химического опробования месторождений. Одной из обязательных операций пробоподготовки является контроль степени измельчения частиц материала пробы. Традиционный ситовой метод определения крупности порошков отличается большой трудоемкостью и низкой экспрессностью. Современное оборудование для анализа гранулометрического состава частиц порошков является достаточно дорогим. В работе предложена простая, дешевая и экспрессная органолептическая методика контроля крупности частиц золотосодержащих руд, применимая в производственных лабораториях. Для этого тонкоизмельченную пробу тщательно перемешивают, распределяют на полимерной пленке слоем толщиной 5-7 мм, а слой делят вручную на приблизительно равные квадраты. Оператор погружает палец в материал пробы в каждом квадрате до контакта с полимерной пленкой и растирает пальцем порошок. Если при этом обнаружится частица пробы, имеющая размер 0.08-0.1 мм, то у оператора формируется устойчивое тактильное ощущение I типа: присутствие «мелкого песка». При наличии в пробе частиц размером более 0.1 мм и менее 0.2 мм у оператора, выполняющего контроль степени измельчения проб, формируется устойчивое тактильное ощущение II типа: присутствие в пробе отдельных крупинок. Эта градация позволяет контролировать качество подготовки проб. Показано, что для органолептической оценки степени измельчения проб золотосодержащих руд в рутинном пробирном анализе достаточно использовать 9 контрольных точек. Разработанный авторами алгоритм проверен на большой группе проб, показано его хорошее совпадение с результатами контроля, полученными с применением классического ситового анализа. При использовании органолептической методики повышается экспрессность и снижается трудоемкость контроля по сравнению с ситовым методом анализа.         Ключевые слова: органолептическая методика, степень измельчения лабораторных проб, контроль крупности порошков, золотосодержащие рудыDOI: http://dx.doi.org/10.15826/analitika.2016.20.4.00

    Prospects for the Bc Studies at LHCb

    Get PDF
    We discuss the motivations and perspectives for the studies of the mesons of the (bc) family at LHCb. The description of production and decays at LHC energies is given in details. The event yields, detection efficiencies, and background conditions for several Bc decay modes at LHCb are estimated.Comment: 20 pages, 5 eps-figure

    Leptonic constants of heavy quarkonia in potential approach of NRQCD

    Get PDF
    We consider a general scheme for calculating the leptonic constant of heavy quarkonium QQ-bar in the framework of nonrelativistic quantum chromodynamics, NRQCD, operating as the effective theory of nonrelativistic heavy quarks. We explore the approach of static potential in QCD, which takes into account both the evolution of effective charge in the three-loop approximation and the linearly raising potential term, which provides the quark confinement. The leptonic constants of bb-bar and cc-bar systems are evaluated by making use of two-loop anomalous dimension for the current of nonrelativistic quarks, where the factor for the normalization of matrix element is introduced in order to preserve the renormalization group invariance of estimates.Comment: 18 pages, 6 eps-figures, discussion and references added, vNRQCD analysis considere

    Development of an organoleptic method to control the crushing ratio of gold-bearing ores laboratory samples

    Full text link
    The sample preparation of gold-bearing ores for the analysis is an important part of the gold fields’ chemical approbation. One of the operations in sample preparation is a control of the size of sample particles. Traditional sieve method to control the particle size is labor intensive and has low rapidity. In addition, the modern equipment for the particle-size analysis is of high cost. In order to implement a cheap, simple and express method to control the particle size of gold-bearing ores in production laboratories this paper presents an algorithm to control the crushing ratio of laboratory samples of gold-bearing ores. Using this new method, it is first necessary to carefully mix a fine sample and to spread it on a smooth surface of the table to form a layer of 5-7 mm thick, and then divide it into approximately equal squares. After this, an operator rubs the sample material with a finger at the control points, immersing the finger in the material until the contact with the polymeric film is made. If at the same time between the film and the finger there will be a sample particle with the size of 0.08-0.1 mm, the operator will have a steady I type tactile sensation (the sensation of the “fine sand”). If at the same time between the film and the finger there will be a sample particle with the size of more than 0.1 mm and less than 0.2 mm, the operator will feel a steady II type tactile sensation (the sensation of the separate grains). This procedure allows controlling the quality of the sample preparation. To control the crushing ratio of gold-bearing ores used in the routine analysis it is enough to use 9 control points. The developed algorithm of the organoleptic method to control the crushing quality was checked on a large group of samples, and its results agreed nicely with the results received using the classical sieve method. Using the organoleptic method, the quickness of control increases and the labor input of control decreases in comparison to the sieve method.The methods of antioxidant activity determination of foodstuffs using different indicator systems were Подготовка проб золотосодержащих руд к анализу является важной составляющей частью химического опробования месторождений. Одной из обязательных операций пробоподготовки является контроль степени измельчения частиц материала пробы. Традиционный ситовой метод определения крупности порошков отличается большой трудоемкостью и низкой экспрессностью. Современное оборудование для анализа гранулометрического состава частиц порошков является достаточно дорогим. В работе предложена простая, дешевая и экспрессная органолептическая методика контроля крупности частиц золотосодержащих руд, применимая в производственных лабораториях. Для этого тонкоизмельченную пробу тщательно перемешивают, распределяют на полимерной пленке слоем толщиной 5-7 мм, а слой делят вручную на приблизительно равные квадраты. Оператор погружает палец в материал пробы в каждом квадрате до контакта с полимерной пленкой и растирает пальцем порошок. Если при этом обнаружится частица пробы, имеющая размер 0.08-0.1 мм, то у оператора формируется устойчивое тактильное ощущение I типа: присутствие «мелкого песка». При наличии в пробе частиц размером более 0.1 мм и менее 0.2 мм у оператора, выполняющего контроль степени измельчения проб, формируется устойчивое тактильное ощущение II типа: присутствие в пробе отдельных крупинок. Эта градация позволяет контролировать качество подготовки проб. Показано, что для органолептической оценки степени измельчения проб золотосодержащих руд в рутинном пробирном анализе достаточно использовать 9 контрольных точек. Разработанный авторами алгоритм проверен на большой группе проб, показано его хорошее совпадение с результатами контроля, полученными с применением классического ситового анализа. При использовании органолептической методики повышается экспрессность и снижается трудоемкость контроля по сравнению с ситовым методом анализа

    Antihypertensive drugs effect on the reninangiotensin- aldosterone system in children (literature review)

    Get PDF
    Arterial hypertension in newborns and infants as a problem is being discussed since the 70s of the previous century. Hypertension is most often of nephrogenic nature and is caused by excessive renin secretion. Nowadays, the number of studies showing high level of evidence in children regarding the safety of taking antihypertensive drugs (AGP) is limited. According to the Russian Federation Ministry of Health data, the frequency varies in the range from 1 to 18 %. The condition is no longer a rarity and has become quite common in infants, being closely associated with such diseases as obesity and impaired carbohydrate metabolism.Артериальная гипертензия у новорожденных и детей грудного возраста как проблема стала обсуждаться с 70-х годов прошлого века. Гипертензия чаще всего нефрогенная и обусловлена избыточной секрецией ренина. Доказательная база по антигипертензивным препаратам у детей намногоскромнее чем у взрослых, в связи с трудностями организации дизайна исследований у детей, невозможностью отследить влияние препаратов на сердечно-сосудистые события, которые встречаются реже, чем у взрослых. В последние годы наблюдается тенденция уверенного роста числа детей и подростков, страдающих артериальной гипертензией. По данным Минздрава РФ частота артериальной гипертензии среди детей варьирует в диапазоне от 1 до 18 %. Данная патология перестала быть редкостью, а стала встречаться довольно часто, имея ассоциацию с избыточной массой тела, ожирением, нарушением углеводного обмена

    Women’s attitude to abdominal delivery

    Get PDF
    The purpose of the study is to find out the attitude of women to delivery by natural childbirth and by caesarean section.Цель исследования - выяснить отношение женщин к родоразрешению путем естественных родов и с помощью кесарева сечения
    corecore