107 research outputs found

    Primary versus delayed repair for bile duct injuries sustained during cholecystectomy: results of a survey of the Association Francaise de Chirurgie

    Get PDF
    BACKGROUND: Bile duct injuries (BDIs) sustained during a cholecystectomy still remain a major surgical problem, and it is still not clear whether the injury should be repaired immediately or a delayed repair is preferred. METHODS: A retrospective national French survey was conducted to compare the results of immediate (at time of cholecystectomy), early (within 45 days after a cholecystectomy) and late (beyond 45 days after a cholecystectomy) surgical repair for BDI sustained during a cholecystectomy. RESULTS: Forty-seven surgical centres provided 640 cases of bile duct injury sustained during a cholecystectomy of which 543 were analysed for the purpose of the present study. The timing of repair was immediate in 194 cases (35.7%), early in 216 cases (39.8%) and late in 133 cases (24.5%). The type of repair was a suture repair in 157 cases (81%), and a bilio-digestive reconstruction in 37 cases (19%) for immediate repair; a suture repair in 119 cases (55.1%) and a bilio-digestive anastomosis in 96 cases (44.9%) for the early repair; and a bilio-digestive reconstruction in 129 cases (97%) and a suture repair in 4 cases (3%) for late repair. A second procedure was required in 110 cases (56.7%) for immediate repair, 80 cases (40.7%) for early repair (P < 0.05) and in 9 cases (6.8%) for late repair (P < 0.001). CONCLUSION: The timing of surgical repair for a bile duct injury sustained during a cholecystectomy influences significantly the rate of a second procedure and a late repair should be preferred option

    1D-confinement of polyiodides inside single-wall carbon nanotubes

    Get PDF
    International audience1D-confinement of polyiodides inside single-wall carbon nanotubes (SWCNT) is investigated. Structural arrangement of iodine species as a function of the SWCNT diameters is studied. Evidence for long range one dimensional ordering of the iodine species is shown by X-ray and electron diffraction experiments independently of the tube diameter. The structure of the confined polyiodides is investigated by X-ray absorption spectroscopy. The confinement influences the local arrangement of the chains. Below a critical diameter Fc of 1 nm, long linear polyiodides are evidenced leading to a weaker charge transfer than for nanotube diameter above Fc. A shortening of the polyiodides is exhibited with the increase of the nanotube diameter leading to a more efficient charge transfer. This point reflects the 1D-confinement of the polyiodides inside the nanotubes

    Interferon-Îł induced expression of MHC antigens facilitates identification of donor cells in chimeric transplant recipients

    Get PDF
    After whole organ transplantation, donor bone marrow-derived cells migrate out of the graft into the recipient, leading to establishment of chimerism, which is the first step towards the subsequent induction of donor-specific tolerance. In routine immunohistochemical staining, monoclonal antibodies specific for heterotopic MHC alleles are used to identify donor and recipient cells. However, it is difficult to detect these cells using this technique in long-term allograft recipients who have a persistently low donor cell population (microchimerism). Because Interferon-gamma (IFN-γ) is known to induce expression of MHC class I and class II cell surface molecules, we used this cytokine 12-48 h before sacrifice, to facilitate the identification of donor and recipient cells in the tissues of animals transplanted with either liver (B10 → C3H) or bone marrow (LEW → BN). In long-term allograft recipients, the use of IFN-γ for as briefly as 12 h prior to sacrifice, results in marked upregulation of class I and class II antigens, leading to easy identification of ubiquitously distributed low numbers of donor cells. © 1994

    Four-week short chain fructo-oligosaccharides ingestion leads to increasing fecal bifidobacteria and cholesterol excretion in healthy elderly volunteers

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Short-chain fructo-oligosaccharides (scFOS) are increasingly used in human diet for their prebiotic properties. We aimed at investigating the effects of scFOS ingestion on the colonic microflora and oro-fecal transit time in elderly healthy humans.</p> <p>Methods</p> <p>Stools composition, oro-fecal transit time, and clinical tolerance were evaluated in 12 healthy volunteers, aged 69 ± 2 yrs, in three consecutive periods: basal period (2 weeks), scFOS (Actilight<sup>®</sup>) ingestion period (8 g/d for 4 weeks) and follow-up period (4 weeks). Two-way ANOVA, with time and treatment as factors, was used to compare the main outcome measures between the three periods.</p> <p>Results</p> <p>Fecal bifidobacteria counts were significantly increased during the scFOS period (9.17 ± 0.17 log cfu/g vs 8.52 ± 0.26 log cfu/g during the basal period) and returned to their initial values at the end of follow-up (8.37 ± 0.21 log cfu/g; P < 0.05). Fecal cholesterol concentration increased during the scFOS period (8.18 ± 2.37 mg/g dry matter vs 2.81 ± 0.94 mg/g dry matter during the basal period) and returned to the baseline value at the end of follow-up (2.87 ± 0.44 mg/g dry matter; P < 0.05). Fecal pH tended to decrease during scFOS ingestion and follow-up periods compared to the basal period (P = 0.06). Fecal bile acids, stool weight, water percentage, and oro-fecal transit time did not change throughout the study. Excess flatus and bloating were significantly more frequent during scFOS ingestion when compared to the basal period (P < 0.05), but the intensity of these symptoms was very mild.</p> <p>Conclusion</p> <p>Four-week 8 g/d scFOS ingestion is well tolerated and leads to a significant increase in fecal bifidobacteria in healthy elderly subjects. Whether the change in cholesterol metabolism found in our study could exert a beneficial action warrants further studies.</p

    Towards the reconstruction of the genome-scale metabolic model of Lactobacillus acidophilus La-14

    Get PDF
    Lactobacillus acidophilus is a probiotic lactic acid bacterium used in food and dietary supplements for many years. However, despite its importance for industrial development and recognized health-promoting effects, no genome-scale metabolic model has been reported. A GSM model for L. acidophilus La-14 was developed, accounting 494 genes and 783 reactions. A genome annotation was performed to identify the metabolic potential of the bacterium. The biomass composition was determined based on information available in literature and previously published models. The model was validated by comparing in silico simulations with experimental data, regarding the aerobic and anaerobic growth. The reconstruction of the metabolic model has confirmed the fastidious requirements of L. acidophilus for amino acids, fatty acids, and vitamins. This model can be used for a better understanding of the metabolism of this bacterium and identification of industrially desirable compounds.This study was performed under the scope of the project “BIODATA.PT – Portuguese Biological Data Network” (ref. LISBOA-01-0145-FEDER-022231), funded by FCT/MCTES, through national funds of PIDDAC, Fundo Europeu de Desenvolvimento Regional (FEDER), Programa Operacional de Competitividade e Internacionalização (POCI) and Programa Operacional Regional de Lisboa (Lisboa 2020).info:eu-repo/semantics/publishedVersio

    Continuous binder-free fibers of pure imogolite nanotubes

    No full text
    Imogolite nanotubes display a range of useful properties and provide an ideal material system to study the assembly of nanomaterials into macroscopic fibers. A method of wet spinning pure, binder-free imogolite fibers has been developed using double walled germanium imogolite nanotubes. Nanotube aspect ratio can be controlled during the initial synthesis and is critical to the spinning process. Fibers made from short nanotubes (<100 nm) have very low gel strengths, whilst dopes with longer nanotubes (500-1000 nm) are readily spinnable. The tensile behaviour of the resulting imogolite nanotube fibers is strongly influenced by relative humidity (RH), with a modulus of 30 GPa at 10% RH compared to 2.8 GPa at 85% RH, as well as a change in failure mode. This result highlights the importance of inter nanotube interactions in such assemblies and provides a useful strategy for further exploration. Interestingly, in the absence of a matrix phase, a degree of misorientation appears to improve load transfer between the individual INTs within the porous fiber, likely due to an increase of the number of inter-particle contacts. Imogolite nanotubes are an appealing analogue to other nanotube fiber systems, and it is hoped that learnings from this system can also be used to improve carbon nanotube fibers

    Wet spinning imogolite nanotube fibres: an in situ process study

    No full text
    Imogolite nanotubes (INTs) form transparent aqueous nematic solutions, with strong birefringence and X-ray scattering power. They provide an ideal model system for studying the assembly of one-dimensional nanomaterials into fibres, as well as offering interesting properties in their own right. Here, in-situ polarised optical microscopy is used to study the wet spinning of pure INTs into fibres, illustrating the influence of process variables during extrusion, coagulation, washing and drying on both structure and mechanical properties. Tapered spinnerets were shown to be significantly more effective than thin cylindrical channels for forming homogeneous fibres; a result related to simple capilliary rheology by fitting a shear thinning flow model. The washing step has a strong influence of structure and properties, combining the removal of residual counter-ions and structural relaxation to produce a less aligned, denser and more networked structure; the timescales and scaling behviour of the processes are compared quantitatively. Both strength and stiffness are higher for INT fibres with a higher packing fraction and lower degree of alignment, indicating the importance of forming a rigid jammed network to transfer stress through these porous, rigid rod assemblies. The electrostatically-stabilised, rigid rod INT solutions were successfully cross-linked using multivalent anions, providing robust gels, potentially useful in other contexts
    • …
    corecore