33 research outputs found
Interfacial chemistry effects in the electrochemical performance of silicon electrodes under lithiumâion battery conditions
Understanding the solid electrolyte interphase (SEI) formation and (de)lithiation phenomena at silicon (Si) electrodes is key to improving the performance and lifetime of Siâbased lithiumâion batteries. However, these processes remain somewhat elusive, and, in particular, the role of Si surface termination merits further consideration. Here, scanning electrochemical cell microscopy (SECCM) is used in a glovebox, followed by secondary ion mass spectrometry (SIMS) at identical locations to study the local electrochemical behavior and associated SEI formation, comparing Si (100) with a native oxide layer (SiO x /Si) and etched with hydrofluoric acid (HFâSi). HFâSi shows greater spatial electrochemical heterogeneity and inferior lithiation reversibility than SiO x /Si. This is attributed to a weakly passivating SEI and irreversible lithium trapping at the Si surface. Combinatorial screening of charge/discharge cycling by SECCM with coâlocated SIMS reveals SEI chemistry as a function of depth. While the SEI thickness is relatively independent of the cycle number, the chemistry â particularly in the intermediate layers â depends on the number of cycles, revealing the SEI to be dynamic during cycling. This work serves as a foundation for the use of correlative SECCM/SIMS as a powerful approach to gain fundamental insights on complex battery processes at the nanoâ and microscales
Activation of Al2O3 surface passivation of silicon : separating bulk and surface effects
Understanding surface passivation arising from aluminium oxide (Al2O3) films is of significant relevance for silicon-based solar cells and devices that require negligible surface recombination. This study aims to understand the competing bulk and surface lifetime effects which occur during the activation of atomic layer deposited Al2O3. We demonstrate that maximum passivation is achieved on n- and p-type silicon with activation at ⌠450 °C, irrespective of annealing ambient. Upon stripping the Al2O3 films and re-passivating the surface using a superacid-based technique, we find the bulk lifetime of float-zone and Czochralski silicon wafers degrade at annealing temperatures > 450 °C. By accounting for this bulk lifetime degradation, we demonstrate that the chemical passivation component associated with Al2O3 remains stable at activation temperatures of 450â500 °C, achieving an SRV of 300 °C, the interface becomes Si/SixAlyO2/Al2O3 due to diffusion of aluminium into the thin silicon oxide layer
The consequences of a year of the COVID-19 pandemic for the mental health of young adult twins in England and Wales
Background The COVID-19 pandemic has affected all our lives, not only through the infection itself but also through the measures taken to control the spread of the virus (e.g. lockdown). Aims Here, we investigated how the COVID-19 pandemic and unprecedented lockdown affected the mental health of young adults in England and Wales. Method We compared the mental health symptoms of up to 4773 twins in their mid-20s in 2018 prior to the COVID-19 pandemic (T1) and during four-wave longitudinal data collection during the pandemic in April, July and October 2020, and in March 2021 (T2-T5) using phenotypic and genetic longitudinal designs. Results The average changes in mental health were small to medium and mainly occurred from T1 to T2 (average Cohen d = 0.14). Despite the expectation of catastrophic effects of the pandemic on mental health, we did not observe trends in worsening mental health during the pandemic (T3-T5). Young people with pre-existing mental health problems were disproportionately affected at the beginning of the pandemic, but their increased problems largely subsided as the pandemic persisted. Twin analyses indicated that the aetiology of individual differences in mental health symptoms did not change during the lockdown (average heritability 33%); the average genetic correlation between T1 and T2-T5 was 0.95, indicating that genetic effects before the pandemic were substantially correlated with genetic effects up to a year later. Conclusions We conclude that on average the mental health of young adults in England and Wales has been remarkably resilient to the effects of the pandemic and associated lockdown
Oral abstracts 3: RA Treatment and outcomesO13.âValidation of jadas in all subtypes of juvenile idiopathic arthritis in a clinical setting
Background: Juvenile Arthritis Disease Activity Score (JADAS) is a 4 variable composite disease activity (DA) score for JIA (including active 10, 27 or 71 joint count (AJC), physician global (PGA), parent/child global (PGE) and ESR). The validity of JADAS for all ILAR subtypes in the routine clinical setting is unknown. We investigated the construct validity of JADAS in the clinical setting in all subtypes of JIA through application to a prospective inception cohort of UK children presenting with new onset inflammatory arthritis. Methods: JADAS 10, 27 and 71 were determined for all children in the Childhood Arthritis Prospective Study (CAPS) with complete data available at baseline. Correlation of JADAS 10, 27 and 71 with single DA markers was determined for all subtypes. All correlations were calculated using Spearman's rank statistic. Results: 262/1238 visits had sufficient data for calculation of JADAS (1028 (83%) AJC, 744 (60%) PGA, 843 (68%) PGE and 459 (37%) ESR). Median age at disease onset was 6.0 years (IQR 2.6-10.4) and 64% were female. Correlation between JADAS 10, 27 and 71 approached 1 for all subtypes. Median JADAS 71 was 5.3 (IQR 2.2-10.1) with a significant difference between median JADAS scores between subtypes (p < 0.01). Correlation of JADAS 71 with each single marker of DA was moderate to high in the total cohort (see Table 1). Overall, correlation with AJC, PGA and PGE was moderate to high and correlation with ESR, limited JC, parental pain and CHAQ was low to moderate in the individual subtypes. Correlation coefficients in the extended oligoarticular, rheumatoid factor negative and enthesitis related subtypes were interpreted with caution in view of low numbers. Conclusions: This study adds to the body of evidence supporting the construct validity of JADAS. JADAS correlates with other measures of DA in all ILAR subtypes in the routine clinical setting. Given the high frequency of missing ESR data, it would be useful to assess the validity of JADAS without inclusion of the ESR. Disclosure statement: All authors have declared no conflicts of interest. Table 1Spearman's correlation between JADAS 71 and single markers DA by ILAR subtype ILAR Subtype Systemic onset JIA Persistent oligo JIA Extended oligo JIA Rheumatoid factor neg JIA Rheumatoid factor pos JIA Enthesitis related JIA Psoriatic JIA Undifferentiated JIA Unknown subtype Total cohort Number of children 23 111 12 57 7 9 19 7 17 262 AJC 0.54 0.67 0.53 0.75 0.53 0.34 0.59 0.81 0.37 0.59 PGA 0.63 0.69 0.25 0.73 0.14 0.05 0.50 0.83 0.56 0.64 PGE 0.51 0.68 0.83 0.61 0.41 0.69 0.71 0.9 0.48 0.61 ESR 0.28 0.31 0.35 0.4 0.6 0.85 0.43 0.7 0.5 0.53 Limited 71 JC 0.29 0.51 0.23 0.37 0.14 -0.12 0.4 0.81 0.45 0.41 Parental pain 0.23 0.62 0.03 0.57 0.41 0.69 0.7 0.79 0.42 0.53 Childhood health assessment questionnaire 0.25 0.57 -0.07 0.36 -0.47 0.84 0.37 0.8 0.66 0.4
Data for Room temperature enhancement of electronic materials by superacid analogues
Treatment with the superacid bis(trifluoromethanesulfonyl)amide (sometimes known as TFSA, TFSI, or HNTf2) enhances the properties of a wide range of optoelectronic materials, resulting in longer effective carrier lifetimes and higher photoluminescence quantum yields. We have conducted a multimaterial study treating both crystalline silicon and transition metal dichalcogenide (TMDC) monolayers and few-layer flakes with solutions formed from TFSA and a range of compounds with related chemical structures with different Lewis acidities, in order to elucidate the factors underpinning the TFSA-related class of enhancement treatments. We adopt dichloromethane (DCM) as a common solvent as it provides good results at room temperature and is potentially less hazardous than TFSA-dichloroethane (DCE) heated to âŒ100 °C, which has been used previously. Kelvin probe experiments on silicon demonstrate that structurally similar chemicals give passivating films with substantially different charge levels, with the higher levels of charge associated with the presence of CF3SO2 groups resulting in longer effective lifetimes due to an enhancement in field-effect passivation. Treatment with all analogue solutions used results in enhanced photoluminescence in MoS2 and WS2 compared to untreated controls. Importantly we find that MoS2 and WS2 can be enhanced by analogues to TFSA that lack sulfonyl groups, meaning an alternative mechanism to that proposed in computational reports for TFSA enhancement must apply
Quantifying photoluminescence variability in monolayer molybdenum disulfide films grown by chemical vapour deposition
Dataset to support: "Quantifying photoluminescence variability in monolayer molybdenum disulfide films grown by chemical vapour deposition"
Monolayer molybdenum disulfide (MoS2) is a promising candidate for inclusion in optoelectronic technologies, owing to its two-dimensional (2D) nature and resultant novel photoluminescence (PL). Chemical vapour deposition (CVD) is an important method for the preparation of large-area films of monolayer MoS2. The PL character of as-prepared monolayer MoS2 must be well understood to facilitate detailed evaluation of any process-induced effects during device fabrication. We comparatively explore the PL emission from four different commercially available CVD-grown MoS2 monolayer films. We characterize the samples via Raman and PL spectroscopy, using both single-spot and mapping techniques, while atomic force microscopy (AFM) is applied to map the surface structure. Via multipeak fitting, we decompose the PL spectra into constituent exciton and trion contributions, enabling an assessment of the quality of the MoS2 monolayers. We find that the PL character varies significantly from sample to sample. We also reveal substantial inhomogeneity of the PL signal across each individual MoS2 film. We attribute the PL variation to non-uniform MoS2 film morphologies that result from the nucleation and coalescence processes during the CVD film development. Understanding the large variability in starting PL behaviour is vital to optimize the optoelectronic properties for MoS2-based devices
THz photoconductivity dynamics of semiconductors from sub-nanosecond to millisecond timescales
The pump-probe delay in optical pump, terahertz probe (OPTP) spectroscopy (time-resolved THz spectroscopy) is typically varied using a mechanical delay stage, which limits the delay range to a few nanoseconds. Here we demonstrate an inexpensive modification to typical OPTP setups that extends the range of pump-probe delays to beyond millisecond timescales, whilst retaining the sub-nanosecond resolution required to resolve faster processes that are often present at early times after pulsed optical excitation. We used this new method to investigate the photoconductance dynamics in a range of materials including IIIV semiconductors, metal halide perovskites, germanium and silicon, whose carrier lifetimes range from a few nanoseconds to milliseconds
Data in support of Exploring hafnium oxideâs potential for passivating contacts for silicon solar cells
Terahertz photoconductance dynamics of semiconductors from sub-nanosecond to millisecond timescales
Optical pump terahertz probe spectroscopy (OPTP) is a versatile non-contact technique that measures transient photoconductance decays with femtosecond temporal resolution. However, its maximum temporal range is limited to only a few nanoseconds by the mechanical delay lines used. We extended the temporal range of OPTP to milliseconds and longer while retaining sub-nanosecond resolution. A separate pump laser was electrically synchronized to the probe pulses, allowing the pumpâprobe delay to be controlled with an electronic delay generator. We demonstrated the capabilities of this technique by examining the photoconductance decays of semiconductors with lifetimes ranging over six orders of magnitude: III-Vs, metal halide perovskites, germanium, and silicon. A direct comparison of results on silicon from OPTP and inductively coupled photoconductance decay highlighted the higher spatial and temporal resolution of OPTP, which allowed in-plane and out-of-plane carrier diffusion to be studied