Monolayer molybdenum disulfide (MoS2) is a promising candidate for inclusion in optoelectronic technologies, owing to its two-dimensional (2D) nature and resultant novel photoluminescence (PL). Chemical vapour deposition (CVD) is an important method for the preparation of large-area films of monolayer MoS2. The PL character of as-prepared monolayer MoS2 must be well understood to facilitate detailed evaluation of any process-induced effects during device fabrication. We comparatively explore the PL emission from four different commercially available CVD-grown MoS2 monolayer films. We characterize the samples via Raman and PL spectroscopy, using both single-spot and mapping techniques, while atomic force microscopy (AFM) is applied to map the surface structure. Via multipeak fitting, we decompose the PL spectra into constituent exciton and trion contributions, enabling an assessment of the quality of the MoS2 monolayers. We find that the PL character varies significantly from sample to sample. We also reveal substantial inhomogeneity of the PL signal across each individual MoS2 film. We attribute the PL variation to non-uniform MoS2 film morphologies that result from the nucleation and coalescence processes during the CVD film development. Understanding the large variability in starting PL behaviour is vital to optimize the optoelectronic properties for MoS2-based devices