Process phenomena and material properties in selective laser sintering of polymers: A review

Selective laser sintering (SLS) is a powder bed fusion technology that uses a laser source to melt selected regions of a polymer powder bed based on 3D model data. Components with complex geometry are then obtained using a layer-by-layer strategy. This additive manufacturing technology is a very complex process in which various multiphysical phenomena and different mechanisms occur and greatly influence both the quality and performance of printed parts. This review describes the physical phenomena involved in the SLS process such as powder spreading, the interaction between laser beam and powder bed, polymer melting, coalescence of fused powder and its densification, and polymer crystallization. Moreover, the main characterization approaches that can be useful to investigate the starting material properties are reported and discussed

Processing of hybrid laminates integrating ZrB2/SiC and SiC layers

Tape casting technique was used to develop hybrid laminates constituting by SiC and ZrB2-SiC layers; the main aim is obtaining a structure which integrate the unique properties of these materials and potentially extent their application temperature range. Multilayer with ZrB2-SiC layers stacked in between SiC ones were successfully processed. Thin cracks propagated in the composite layers without affecting SiC ones; their formation was due to residual stresses developed in the two materials because of the differences in their shrinkage and coefficients of thermal expansion. However, these cracks did not significantly affect the material properties: relative density, elastic modulus and flexural strength of hybrid laminates was indeed only slightly lower than those of laminates made up of layers with the same composition

Strategy for the development of a new stick formula without microplastics

Plastic is a synthetic, malleable, and durable material that has been used for various applications since its invention in the late 19th century. During its very long-time degradation process, mechanical and/or photochemical processes fragment plastic into increasingly smaller fragments called microplastics (MPs). In the cosmetic field, MPs are directly added to many products for various functions, including to exploit their exfoliating and structuring power. Unfortunately, it has been realized that MPs are not retained in purification plants and therefore end up in the aquatic environment causing a high problem of environmental pollution. Polyethene (PE) is the most widely used MP in cosmetics due to its use as a structuring agent, to provide consistency to formulations and as a key ingredient in lipsticks and mascaras. Given the limitations imposed by regulations and the growing demand from consumers for chemical-free and eco-friendly products, the common synthetic and petroleum-based waxes used in lipstick formulations, such as PE, must necessarily be replaced by natural waxes of plant origin. In this paper we report the development of a chemical-free and eco-friendly cosmetic stick. To achieve the goal, it was necessary to study the compatibility of the ABWAX® Revowax, natural alternative to PE, with oils and colours to predict the behaviour of these structuring waxes in more complex systems. Through a systematic comparative study, the two waxes showed similar thermal characteristics and showed similar penetration curves, presenting overall comparable performance in the MP-free finished product. We can therefore consider ABWAX® Revowax natural wax a valid alternative to PE

Optimization of selective laser sintering process conditions using stable sintering region approach

The optimization of process parameters represents one of the major drawbacks of selective laser sintering (SLS) technology since it is largely empirical and based on performing a series of trial-and-error builds. This approach is time con-suming, costly, and it ignores the properties of starting powders. This paper provides new results into the prediction of processing conditions starting from the material properties. The stable sintering region (SSR) approach has been applied to two different polymer-based powders: a polyamide 12 filled with chopped carbon fibers and polypropylene. This study shows that the laser exposure parameters suitable for successful sintering are in a range that is significantly smaller than the SSR. For both powders, the best combination of mechanical properties, dimensional accuracy, and porosity level are in fact, achieved by using laser energy density values placed in the middle of the SSR

Selective Laser Sintering versus Multi Jet Fusion: A Comprehensive Comparison Study Based on the Properties of Glass Beads-Reinforced Polyamide 12

Selective laser sintering (SLS) and multi jet fusion (MJF) are the most widespreadpowder bed fusion additive manufacturing techniques for fabricating polymericparts since they offer great designflexibility, productivity, and geometricalaccuracy. However, these technologies differ in the thermal energy source usedto melt the powders as well as the innovative use of printing agents featured inthe latter one to promote material consolidation and to avoid thermal bleeding atthe part contours. The use of a single powder made of glass beads-reinforcedpolyamide 12 (PA12/GB) for the fabrication of MJF and SLS samples makespossible a systematic comparison of the printed parts properties. A thoughtfulanalysis of the microstructure and mechanical properties of the samples revealsdifferences and peculiarities between the two technologies. SLS exhibits lowerporosity and higher mechanical performances when the parts are printed alongthe build plane thanks to the powerful heating ensured by the laser. In contrast,MJF samples show higher mechanical isotropy with greatflexural and tensilebehavior for vertically oriented parts. The role of glass beads in the materialbehavior is defined by their mechanical properties, meaning higher rigidity andlower strength compared to neat PA12, and fracture mechanism

Wearable and interactive mixed reality solutions for fault diagnosis and assistance in manufacturing systems: Implementation and testing in an aseptic bottling line

Thanks to the spread of technologies stemming from the fourth industrial revolution, also the topic of fault diagnosis and assistance in industrial contexts has benefited. Indeed, several smart tools were developed for assisting with maintenance and troubleshooting, without interfering with operations and facilitating tasks. In line with that, the present manuscript aims at presenting a web smart solution with two possible applications installed on an Android smartphone and Microsoft HoloLens. The solution aims at alerting the operators when an alarm occurs on a machine through notifications, and then at providing the instructions needed for solving the alarm detected. The two devices were tested by the operators of an industrial aseptic bottling line consisting of five machines in real working conditions. The usability of both devices was positively rated by these users based on the System Usability Scale (SUS) and additional appropriate statements. Moreover, the in situ application brought out the main difficulties and interesting issues for the practical implementation of the solutions tested

Neurologic outcome of postanoxic refractory status epilepticus after aggressive treatment

OBJECTIVE: To investigate neurologic outcome of patients with cardiac arrest with refractory status epilepticus (RSE) treated with a standardized aggressive protocol with antiepileptic drugs and anesthetics compared to patients with other EEG patterns. METHODS: In the prospective cohort study, 166 consecutive patients with cardiac arrest in coma were stratified according to 4 independent EEG patterns (benign, RSE, generalized periodic discharges [GPDs], malignant nonepileptiform) and multimodal prognostic indicators. Primary outcomes were survival and cerebral performance category (CPC) at 6 months. RESULTS: RSE occurred in 36 patients (21.7%) and was treated with an aggressive standardized protocol as long as multimodal prognostic indicators were not unfavorable. RSE started after 3 \ub1 2.3 days after cardiac arrest and lasted 4.7 \ub1 4.3 days. A benign EEG pattern was recorded in 76 patients (45.8%); a periodic pattern (GPDs) was seen in 13 patients (7.8%); and a malignant nonepileptiform EEG pattern was recorded in 41 patients (24.7%). The 4 EEG patterns were highly associated with different prognostic indicators (low-flow time, clinical motor seizures, N20 responses, neuron-specific enolase, neuroimaging). Survival and good neurologic outcome (CPC 1 or 2) at 6 months were 72.4% and 71.1% for benign EEG pattern, 54.3% and 44.4% for RSE, 15.4% and 0% for GPDs, and 2.4% and 0% for malignant nonepileptiform EEG pattern, respectively. CONCLUSIONS: Aggressive and prolonged treatment of RSE may be justified in patients with cardiac arrest with favorable multimodal prognostic indicators

Interim [18F] Fluorodeoxyglucose Positron Emission Tomography (Pet) for Early Metabolic Assessment of Response to Peb Chemotherapy for Metastatic Seminoma: Preliminary Findings

n/

Measurement of the total cross section and ρ-parameter from elastic scattering in pp collisions at sqrt(s)=13 TeV with the ATLAS detector

In a special run of the LHC with β⋆=2.5 km, proton–proton elastic-scattering events were recorded at sqrt(s)=13 TeV with an integrated luminosity of 340 μb^{−1} using the ALFA subdetector of ATLAS in 2016. The elastic cross section was measured differentially in the Mandelstam t variable in the range from −t=2.5⋅10^{−4} GeV^2 to −t=0.46 GeV^2 using 6.9 million elastic-scattering candidates. This paper presents measurements of the total cross section σ_{tot}, parameters of the nuclear slope, and the ρ-parameter defined as the ratio of the real part to the imaginary part of the elastic-scattering amplitude in the limit t→0. These parameters are determined from a fit to the differential elastic cross section using the optical theorem and different parameterizations of the t-dependence. The results for σ_{tot} and ρ are σ_{tot}(pp→X)=104.7±1.1 mb ρ=0.098±0.011. The uncertainty in σ_{tot} is dominated by the luminosity measurement, and in ρ by imperfect knowledge of the detector alignment and by modelling of the nuclear amplitude

A Systems Biology Approach Reveals the Endocrine Disrupting Potential of Aflatoxin B1

Background Aflatoxin B1 (AFB1) a mycotoxin produced by Aspergillus flavus and A. parasiticus is a potent carcinogen and causative agent of hepatocellular carcinoma (HCC). It is a food contaminant which presents a major risk to human health. AFB1 contamination poses a significant economic burden, as 25% of the world's food crops need to be destroyed annually. The mechanism of action (MOA) of aflatoxins remains to be fully elucidated. Recent findings suggest that AFB1 mediated endocrine disruption may occur in the population of regions with high contamination, even without evidence of direct dietary intake. Objective An integrative systems biology approach was undertaken to decipher the estrogenic component of the mechanism of action (MOA) of AFB1. Methods Molecular Docking and Molecular dynamics simulations were performed to examine the binding affinity of AFB1 and its metabolite aflatoxin Q1 (AFQ1) with the Estrogen Receptors (ERs). Differential gene expression (DGE), gene ontology (GO) and pathway analyses were carried out on hepatic transcriptomic data generated from in vivo AFB1 exposures. In parallel exposures to the synthetic estrogen ethinylestradiol (EE2) were examined for overlapping effects. Finally, protein–protein interaction (PPI) network analysis assessed the involvement of estrogen responsive targets (ERTs) associated with aflatoxin exposure. Results The free energies of binding affinity and estimated equilibrium dissociation constants (KD) demonstrated that AFB1 and AFQ1 can interact with the ERα and ERβ. DGE and GO analyses highlighted overlap in the responses between AFB1 and EE2 treatments with the activation of key processes involved in estrogenic signaling. PPI network analyses after AFBI exposure revealed a dynamic response to AFB1 treatments with the solid involvement of ERTs in regulatory networks. Conclusions This study revealed molecular interactions between aflatoxins (AFB1, AFQ1) and ERs in addition to overlap in differentially expressed genes and biological processes following AFB1 and EE2 exposures. The estrogenic components at the core of the PPI networks suggest that ER-mediated signaling pathways are a major component in the MOA of aflatoxins