Ion source developments for stable and radioactive ion beams at GANIL

Since now many years, the Ganil ion source team has in charge to develop ion sources with three main purposes. The first one concerns the radioactive ion production that implies high efficiency ion sources as the amount of created exotic atoms is very low (between 10 to 108 particle per second). The second one deals with high intensities of stable metallic ion beams for the injectors of the accelerator while the last one tries to increase the intensities of very high charge state ion beams for atomic physic. Concerning radioactive ion production, the recent results obtained, in collaboration with the ISN Grenoble group, with the 1+/n+ method drove us to develop a new concept of ecr ion source for monocharged ion production. The results of the first tests of this source will be given. This new idea for the construction of ecr ion source can be applied to multicharged ion production. Concerning the high charge state ion beam production, a new source called SUPERSHYPIE has been built that allow to increase by a factor 2 the length of the plasma of an ECR4M source. This new concept has just been started and has produced arround 50 nAe of Ar17+ . The first results of this new source will be presented. Concerning the developments of metallic ion beams, a separated poster will be presented at this workshop

Transport and cooling of singly-charged noble gas ion beams

The transport and cooling of noble gas singly-charged ion beams by means of a Radio Frequency Quadrupole Cooler Buncher (RFQCB) have been studied at the LIMBE low energy beam line of the GANIL facility. Ions as light as $^{4}He^+$ have been cooled and stored before their extraction in bunches using $H_2$ as buffer gas. Bunches characteristics have been studied as a function of the parameters of the device. Sizeable transmissions of up to 10 $$ have been obtained. A detailed study of the lifetime of ions inside the buncher has been performed giving an estimate of the charge exchange cross-section. Results of a microscopic Monte-Carlo transport code show reasonable agreement with experimental data.Comment: 13 figure

MONOBOB II : Latest results of monocharged ions source for SPIRAL2 project

Original publication available at http://www.jacow.orgInternational audienceAmong the sources which can be installed in the radioactive ion production module of SPIRAL II, a singly-charged ECRIS has been chosen to produce ions from gaseous elements. Its characterization is under way on a test bench at GANIL. Extraction, transport and response time results are presented

ECR Ion sources for radioactive ion beam production

17th workshop on ECR Ion Sources and their Applications, Lanzhou, Chine (2006)International audienceECRIS's dedicated to radioactive ion producton must be as efficient as those used for production of stable elements, but in addition they are subject to more specific constraints such as radiation hardness, short atom-to-ion transformation time, beam purity and low cost. Up to now, different target/ion-source system (TISSs) have been designed, using singly-charged ECRISs, multi-charged ion sources or an association of singly-to-multi-charged ECRISs. The main goal, constraints and advantages of different existing ECR setups wil be compared before a more detailed description is given of the one designed for the SPIRAL II project and ist future improvements

Permanent magnets under irradiation and radiocative alkali ion beam development for SPIRAL1

International audienceUp to now, eighteen Target Ion Source Systems (TISSs) have been built and used for the production of radioactive ion beams on SPIRAL 1 facility, based on the Isotope- Separator-On-Line (ISOL) method. The TISSs are composed of thick carbon targets and of fully permanentmagnet Electron Cyclotron Resonance Ion Sources (ECRISs) of the Nanogan III type. After irradiation and a decay period of two years, the irradiated TISSs are dismounted and if their magnetic fields are still suitable, the ECRIS are used with a new target. Thereby thirty-two runs have been performed using new or renewed TISSs. , After irradiation, the measured magnetic field sometimes reveals magnet damage. Our experience is reported here. In the second section, we present the progress on the NanoNaKE setup, which aims to extend the radioactive ion beams in SPIRAL 1 to the alkali elements, by connecting a surface-ionization source to the Nanogan III ECRIS via a compact 1+ ion beam line. The main issues and difficulties are discussed and the preliminary solutions are described

Production of multi-charged phosphorus ions with ecris 'SUPERSHyPIE' at GANIL

The Ganil's Ion Production Group tested the source SUPERSHyPIE123 for theproduction of phosphorus n+ ion beams. The SUPERSHyPIE ecris is used for many testsof multi-charged ion production and supply ion beams for LIMBE4 (low energie beamline). This ion source works with a 14.5ghz RF power injected by a circular waveguide inthe axis of the sourc

Ion sources at GANIL

International audienceThe GANIL produces since many years heavy ion beams with Electron Cyclotron Resonance ion sources. Different facilities have been constructed during the last years in order to allow experiments in a large range of energy (from some tens of kV to 100 MeV/nucleon). The list of available ions has been greatly extended with the construction of the SPIRAL1 facility that produces and accelerates radioactives ions . An overview of the different developments made at GANIL for stable and radioactive ion beam production including the sources for the SPIRAL2 project is given in this paper

Recycling effect of germanium on ECR ion source

After running for three weeks with a 76Ge beam provided by the ECR-4 ion source at GANILwe have investigated the recycling effect of an SF6 plasma. The initial beam was produced bythe classical method, using germanium dioxide in our micro-oven and helium as support gas.The overall ionization efficiency was measured and found to be around 3%. Without theoven, and using SF6 instead of helium, the ECR-4 ion source has been able to produce a verystable beam during a two-week period. The intensity of 76Ge13+ (enrichment 88%) wasincreased to 40 eμA, and the overall ionization efficiency reached 40%.The oven method of production, the recycling effect and perspectives are described in thispaper

SPIRAL II Project (electron option) - Preliminary Design Study

This document presents a Preliminary Design Study (PDS) of the electron option of the SPIRAL II project

Visible light spectrometry measurements for studying an ECRIS plasma and especially applied to the MONO1001 ion source

International audienceThe cylindrical geometry of the magnetic confinement of the MONO1001 ECR ion sourcemade in GANIL1, allows us to measure radial characteristics of the working ECR plasmawith Helium gas. The physical and the geometrical characteristics of the resonance surfaceinside the working ECR source have been quantified with the help of a visible lightspectrometer. Hence, we have deduced a shape of the ECRIS resonance surface whichcorresponds closely to our magnetic calculations