Biocontrol of larval mosquitoes by Acilius sulcatus (Coleoptera: Dytiscidae)

<p>Abstract</p> <p>Background</p> <p>Problems associated with resistant mosquitoes and the effects on non-target species by chemicals, evoke a reason to find alternative methods to control mosquitoes, like the use of natural predators. In this regard, aquatic coleopterans have been explored less compared to other insect predators. In the present study, an evaluation of the role of the larvae of <it>Acilius sulcatus </it>Linnaeus 1758 (Coleoptera: Dytiscidae) as predator of mosquito immatures was made in the laboratory. Its efficacy under field condition was also determined to emphasize its potential as bio-control agent of mosquitoes.</p> <p>Methods</p> <p>In the laboratory, the predation potential of the larvae of <it>A. sulcatus </it>was assessed using the larvae of <it>Culex quinquefasciatus </it>Say 1823 (Diptera: Culicidae) as prey at varying predator and prey densities and available space. Under field conditions, the effectiveness of the larvae of <it>A. sulcatus </it>was evaluated through augmentative release in ten cemented tanks hosting immatures of different mosquito species at varying density. The dip density changes in the mosquito immatures were used as indicator for the effectiveness of <it>A. sulcatus </it>larvae.</p> <p>Results</p> <p>A single larva of <it>A. sulcatus </it>consumed on an average 34 IV instar larvae of <it>Cx. quinquefasciatus </it>in a 24 h period. It was observed that feeding rate of <it>A. sulcatus </it>did not differ between the light-on (6 a.m. – 6 p.m.), and dark (6 p.m. – 6 a.m.) phases, but decreased with the volume of water i.e., space availability. The prey consumption of the larvae of <it>A. sulcatus </it>differed significantly (P < 0.05) with different prey, predator and volume combinations, revealed through univariate ANOVA. The field study revealed a significant decrease (p < 0.05) in larval density of different species of mosquitoes after 30 days from the introduction of <it>A. sulcatus </it>larvae, while with the withdrawal, a significant increase (p < 0.05) in larval density was noted indicating the efficacy of <it>A. sulcatus </it>in regulating mosquito immatures. In the control tanks, mean larval density did not differ (p > 0.05) throughout the study period.</p> <p>Conclusion</p> <p>the larvae of the dytiscid beetle <it>A. sulcatus </it>proved to be an efficient predator of mosquito immatures and may be useful in biocontrol of medically important mosquitoes.</p

Role of Mitochondrial Electron Transport Chain Complexes in Capsaicin Mediated Oxidative Stress Leading to Apoptosis in Pancreatic Cancer Cells

We evaluated the mechanism of capsaicin-mediated ROS generation in pancreatic cancer cells. The generation of ROS was about 4–6 fold more as compared to control and as early as 1 h after capsaicin treatment in BxPC-3 and AsPC-1 cells but not in normal HPDE-6 cells. The generation of ROS was inhibited by catalase and EUK-134. To delineate the mechanism of ROS generation, enzymatic activities of mitochondrial complex-I and complex-III were determined in the pure mitochondria. Our results shows that capsaicin inhibits about 2.5–9% and 5–20% of complex-I activity and 8–75% of complex-III activity in BxPC-3 and AsPC-1 cells respectively, which was attenuable by SOD, catalase and EUK-134. On the other hand, capsaicin treatment failed to inhibit complex-I or complex-III activities in normal HPDE-6 cells. The ATP levels were drastically suppressed by capsaicin treatment in both BxPC-3 and AsPC-1 cells and attenuated by catalase or EUK-134. Oxidation of mitochondria-specific cardiolipin was substantially higher in capsaicin treated cells. BxPC-3 derived ρ0 cells, which lack mitochondrial DNA, were completely resistant to capsaicin mediated ROS generation and apoptosis. Our results reveal that the release of cytochrome c and cleavage of both caspase-9 and caspase-3 due to disruption of mitochondrial membrane potential were significantly blocked by catalase and EUK-134 in BxPC-3 cells. Our results further demonstrate that capsaicin treatment not only inhibit the enzymatic activity and expression of SOD, catalase and glutathione peroxidase but also reduce glutathione level. Over-expression of catalase by transient transfection protected the cells from capsaicin-mediated ROS generation and apoptosis. Furthermore, tumors from mice orally fed with 2.5 mg/kg capsaicin show decreased SOD activity and an increase in GSSG/GSH levels as compared to controls. Taken together, our results suggest the involvement of mitochondrial complex-I and III in capsaicin-mediated ROS generation and decrease in antioxidant levels resulting in severe mitochondrial damage leading to apoptosis in pancreatic cancer cells

An internet of things and blockchain based smart campus architecture

Rapid development in science and information technologies, such as the Internet of things, has led to a growth in the number of studies and research papers on smart cities in recent years and more specifically on the construction of smart campus technologies. This paper will review the concept of a smart campus, discuss the main technologies deployed, and then propose a new novel framework for a smart campus. The architecture of this new smart campus approach will be discussed with particular consideration of security and privacy systems, the Internet of things, and blockchain technologies

A new design for friction stir spot joining of Al alloys and carbon fibre reinforced composites

Friction stir spot welding (FSSW) has been recently developed to join dissimilar materials. However, the traditional requirement for a rotating tool consists of a pin and shoulder in FSSW leads to a complex joining process and unpredictable defects. In this study, a new static-shoulder design in FSSW was proposed and developed to join Al alloys to carbon fiber-reinforced polymer (CFRP) composites. The main joining parameters, including pin rotational speed, pin feed rate and pin plunge depth, were varied to investigate their effects on the joining temperature, materials interaction and the strength of joints. The pin rotational speed had the largest influence on the joining temperature. Lap shear tensile testing was conducted to evaluate the performance of the joints. The joints exhibited the ultimate lap shear force from 230 to 260 N. A brittle fracture occurred with the displacement-at-fracture load of 0.35-0.41 mm. Cross-sectional images revealed the creation of undulations on the surface of Al alloys in the joining zone. The undulations created a macro-mechanical interlocking bonding between the materials, which determined the performance of the joints. For a flat pin, by increasing the plunge depth from 1.25 to 1.30 mm, the undulation size increased from 0.21 to 0.26 mm, which can enhance the macro-mechanical interlocking bonding between Al alloys and CFRP and accordingly increased the ultimate shear force of the joints from 230 to 241 N. Use of a fluted pin significantly influenced the flow of the plasticized Al alloy which created pronounced undulations and large Al alloy spikes of 0.46 mm. These features seemed to establish an efficient macro-mechanical interlocking bonding, which resulted in a noticeable improvement in the performance of the joint. For a plunge depth of 1.30 mm, the ultimate shear force increased to 261 N using the fluted pin

Plant Growth-Promoting Microbes from Herbal Vermicompost

Overreliance on chemical pesticides and fertilizers has resulted in problems including safety risks, outbreaks of secondary pests normally held in check by natural enemies, insecticide resistance, environmental contamination, and decrease in biodiversity. The increasing costs and negative effects of pesticides and fertilizers necessitate the idea of biological options of crop protection and production. This includes the use of animal manure, crop residues, microbial inoculum, and composts. They provide natural nutrition, reduce the use of inorganic fertilizers, develop biodiversity, increase soil biological activity, maintain soil physical properties, and improve environmental health

Chip formation mechanism and machinability of wrought duplex stainless steel alloys

This paper investigates the chip formation mechanism and machinability of two-phase materials, such as, wrought duplex stainless steel alloys SAF 2205 and SAF 2507. SEM and optical microscopic details of the frozen cutting zone and chips revealed that the harder austenite phase dissipates in the advancement of the cutting tool, being effectively squeezed out of the softer ferrite phase. Microhardness profiles reveal correlation in hardness from the workpiece material transitioning to the chip. The tool wear (TiAIN + TiN coated solid carbide twist drill) and machining forces were investigated. Tool wear, was dominantly due to the adhesion process which developed from built-up edge formation, is highly detrimental to the flank face. Flute damage was also observed as a major issue in the drilling of duplex alloys leading to premature tool failure. Duplex 2507 shows higher sensitivity to cutting speed during machining and strain hardening at higher velocity and less machinability due to presence of higher percentage of Ni, Mo and Cr

Experimental investigation of perturbation Monte-Carlo based derivative estimation for imaging low-scattering tissue

Experimental results for imaging the low-scattering tissue phantoms based on the derivative estimation through perturbation Monte- Carlo (pMC) method are presented. It is proven that pMC-based methods give superior reconstructions compared to diffusion-based reconstruction methods. An easy way to estimate the Jacobian using analytical expression obtained from perturbation Monte-Carlo method is employed. Simulation studies on the same objects, considered in the experiment, are performed and corresponding results are found to be in reasonable agreement with the experimental studies. It is shown that inter-parameter cross talk in diffusion based methods lead to false results for the low-scattering tissue, where as the pMC-based method gives accurate results

Magnetic ground state, field-induced transitions, electronic structure, and optical band gap of the frustrated antiferromagnet GeCo2O4

Systematic studies of magnetic ordering, magnetic-field-induced transitions, electronic structure, and optical properties of the frustrated spinel GeCo2O4 (GCO) are reported. Our results reveal that GCO orders antiferro-magnetically (AFM) at T-N = 20.4 K but with significant short-range ferromagnetic (FM) order up to T similar to 5 T-N. The paramagnetic susceptibility (chi) fits the modified Curie-Weiss law, chi = chi(o) + C/(T - theta), with theta = +51 K for 100 K < T < 800 K. The fit to high-temperature-series expansion of chi (T) yields J(1)/k(B) = 14.7 K as the dominant FM exchange coupling for the pyrochlore lattice of Co2+ spins consisting of alternate planes of Kagome (KGM) and Triangular (TRI) spins lying perpendicular to 111] direction. From the analysis of the M-H plots at 2 K and published results, three critical fields are identified: H-d similar to 11 kOe due to AFM domains, H-C1 approximate to 44 kOe related to spin-flips and FM ordering of the TRI spins, and H-C2 approximate to 97 kOe related to FM ordering of the KGM spins. For H > H-C2, GCO is a forced ferromagnet with some canting of the spins. Magnetic field dependence of T-N follows the relation T-N (H) = T-N(0)-D1H2 valid for antiferromagnets with D-1 = 6.63 x 10(-10) K/Oe(2). This magnitude of T-N(H) along with the temperature dependence of H-d, H-C1, and H-C2 are used to construct the H-T phase diagram. From the magnitudes of the Curie constant (C) and the saturation magnetization at 2 K it is shown that Co2+ ions in GCO have the ground state with effective spin S = 1/2. High resolution x-ray photoelectron spectra of 2p and 3d orbitals of Co and Ge confirm the divalent and tetravalent electronic states of Co and Ge, respectively, in GCO. The energy band gap (E-g = 3.28 eV) evaluated using DFT+U calculations is in good agreement with the experimental results (E-g = 3.16 eV) obtained from the diffuse reflectance spectroscopy