634 research outputs found
Quantum to Classical Transition in a Single-Ion Laser
Stimulated emission of photons from a large number of atoms into the mode of
a strong light field is the principle mechanism for lasing in "classical"
lasers. The onset of lasing is marked by a threshold which can be characterised
by a sharp increase in photon flux as a function of external pumping strength.
The same is not necessarily true for the fundamental building block of a laser:
a single trapped atom interacting with a single optical radiation mode. It has
been shown that such a "quantum" laser can exhibit thresholdless lasing in the
regime of strong coupling between atom and radiation field. However, although
theoretically predicted, a threshold at the single-atom level could not be
experimentally observed so far. Here, we demonstrate and characterise a
single-atom laser with and without threshold behaviour by changing the strength
of atom-light field coupling. We observe the establishment of a laser threshold
through the accumulation of photons in the optical mode even for a mean photon
number substantially lower than for the classical case. Furthermore,
self-quenching occurs for very strong external pumping and constitutes an
intrinsic limitation of single-atom lasers. Moreover, we find that the
statistical properties of the emitted light can be adjusted for weak external
pumping, from the quantum to the classical domain. Our observations mark an
important step towards fundamental understanding of laser operation in the
few-atom limit including systems based on semiconductor quantum dots or
molecules.Comment: 19 pages, 4 figures, 10 pages supplement, accepted by Nature Physic
The effect of seasoning with herbs on the nutritional, safety and sensory properties of reduced-sodium fermented Cobrançosa cv. table olives
This study aimed at evaluating the effectiveness of seasoning Cobrancosa table olives in a brine with aromatic ingredients, in order to mask the bitter taste given by KCl when added to reduced-sodium fermentation brines. Olives were fermented in two different salt combinations: Brine A, containing 8% NaCl and, Brine B, a reduced-sodium brine, containing 4% NaCl + 4% KCl. After the fermentation the olives were immersed in seasoning brines with NaCl (2%) and the aromatic herbs (thyme, oregano and calamintha), garlic and lemon. At the end of the fermentation and two weeks after seasoning, the physicochemical, nutritional, organoleptic, and microbiological parameters, were determined. The olives fermented in the reduced-sodium brines had half the sodium concentration, higher potassium and calcium content, a lower caloric level, but were considered, by a sensorial panel, more bitter than olives fermented in NaCl brine. Seasoned table olives, previously fermented in Brine A and Brine B, had no significant differences in the amounts of protein (1.23% or 1.11%), carbohydrates (1.0% or 0.66%), fat (20.0% or 20.5%) and dietary fiber (3.4% or 3.6%). Regarding mineral contents, the sodium-reduced fermented olives, presented one third of sodium, seven times more potassium and three times more calcium than the traditional olives fermented in 8% NaCl. Additionally, according to the panelists' evaluation, seasoning the olives fermented in 4% NaCl + 4% KCl, resulted in a decrease in bitterness and an improvement in the overall evaluation and flavor. Escherichia coli and Salmonella were not found in the olives produced.info:eu-repo/semantics/publishedVersio
Development of ASAS quality standards to improve the quality of health and care services for patients with axial spondyloarthritis
Objectives The Assessment of SpondyloArthritis International Society (ASAS) aimed to develop a set of quality standards (QS) to help improve the quality of healthcare provided to adult patients affected by axial spondyloarthritis (axSpA) worldwide.
Methods An ASAS task force developed a set of QS using a stepwise approach. First, key areas for quality improvement were identified, discussed, rated and agreed on. Thereafter, areas were prioritised and statements for the most important key areas were phrased on consensus. Appropriate quality measures were defined to allow quantification of the QS at the community level.
Results The ASAS task force, consisting of 20 rheumatologists, two physiotherapists and two patients, selected and proposed 34 potential key areas for quality improvement which were then commented by 140 ASAS members and patients. Within that process three new key areas came up, which led to a re-evaluation of all 37 key areas by 120 ASAS members and patients. Five key areas were identified as most important to determine quality of care: referral including rapid access, rheumatology assessment, treatment, education/self-management and comorbidities. Finally, nine QS were agreed on and endorsed by the whole ASAS membership.
Conclusions ASAS successfully developed the first set of QS to help improving healthcare for adult patients with axSpA. Even though it may currently not be realistic to achieve the QS in all healthcare systems, they provide high-quality of care framework for patients with axSpA that should be aimed for
Numerical and experimental analysis of wrinkling during the cup drawing of an AA5042 aluminium alloy
The recent trend to reduce the thickness of metallic sheets used in forming processes strongly increases the likelihood of the occurrence of wrinkling. Thus, in order to obtain defect-free components, the prediction of this kind of defect becomes extremely important in the tool design and selection of process parameters. In this study, the sheet metal forming process proposed as a benchmark in the Numisheet 2014 conference is selected to analyse the influence of the tool geometry on wrinkling behaviour, as well as the reliability of the
developed numerical model. The side-wall wrinkling during the deep drawing process of a cylindrical cup in AA5042 aluminium alloy is investigated through finite element simulation and experimental measurements. The material plastic anisotropy is modelled with an advanced yield criterion beyond the isotropic (von Mises) material behaviour. The results show that the shape of the wrinkles predicted by the numerical model is strongly affected by the finite element mesh used in the blank discretization. The accurate modelling of the plastic anisotropy of the aluminium alloy yields numerical results that are in good agreement with the experiments, particularly the shape and location of the wrinkles. The predicted punch force evolution is strongly influenced by the friction coefficient used in the model. Moreover, the two punch geometries provide drawn cups with different wrinkle waves, mainly differing in amplitude.The authors gratefully acknowledge the financial support of the Portuguese Foundation for Science and Technology (FCT) under project PTDC/EMS-TEC/1805/2012. The first author is also grateful to the FCT for the Postdoctoral grant SFRH/BPD/101334/2014 and P.D. Barros is grateful to the FCT for the PhD Grant SFRH/BD/98545/2013info:eu-repo/semantics/publishedVersio
Effect of the displacement rate and inclination angle in steel fiber pullout tests
This paper summarizes the results obtained in an experimental campaign on the effect of the displacement pullout rate and the inclination angle of the steel fiber pullout tests. For that purpose, specimens were obtained from a self-compacting concrete with a compressive strength of 86 MPa. In the experimental program, hooked-end steel fibers of 0.75 mm diameter and 60 mm length were used. Tests were executed with both hooked-end fibers, and smooth fibers obtained from the former by cutting the hooked end. For both type of fibers, their embedment length into concrete was 20 mm, and the influence of fiber inclination angle toward the load direction was investigated by adopting values of 0∘, 30∘ and 60∘. The tests were performed at displacement rates of 0.01, 0.1 and 1 mm/s. The results have shown that the peak pullout load increased with the inclination angle, in particular for the smooth series. Furthermore, higher displacement rates led to a higher energy absorption capacity for the pullout of the smooth fibers, while the energy absorption remained almost stable for hooked-end fibers.project BIA2015-68678-C2-1-R.
M. Tarifa appreciates the financial support from the Department of Applied Mechanics and Project Engineering, UCLM
(2018), and from the Programa propio de I+D+i de la Universidad Politécnica de Madrid para realizar estancias de investigación internacional igual o superior a un mes (2019), to do
two stays at the University of Minho, Guimarães, Portugal. E.
Poveda acknowledges the funding from the International Campus of Excellence CYTEMA and the University of Castilla-La
Mancha, throughout Ayudas para estancias en universidades y
centros de investigación en el extranjero en 2019 en el ámbito del
plan propio de investigación susceptibles de cofinanciación por
el Fondo Europeo de Desarrollo Regional (FEDER), Programa
010100021 to fund her stays in the University of Minho during
2018 and 2019, respectively. The authors thank the support of
the Department of Civil Engineering and the Laboratory of the
Structural Division (LEST), University of Minh
Incompatibilities Involving Yeast Mismatch Repair Genes: A Role for Genetic Modifiers and Implications for Disease Penetrance and Variation in Genomic Mutation Rates
Genetic background effects underlie the penetrance of most genetically determined phenotypes, including human diseases. To explore how such effects can modify a mutant phenotype in a genetically tractable system, we examined an incompatibility involving the MLH1 and PMS1 mismatch repair genes using a large population sample of geographically and ecologically diverse Saccharomyces cerevisiae strains. The mismatch repair incompatibility segregates into naturally occurring yeast strains, with no strain bearing the deleterious combination. In assays measuring the mutator phenotype conferred by different combinations of MLH1 and PMS1 from these strains, we observed a mutator phenotype only in combinations predicted to be incompatible. Surprisingly, intragenic modifiers could be mapped that specifically altered the strength of the incompatibility over a 20-fold range. Together, these observations provide a powerful model in which to understand the basis of disease penetrance and how such genetic variation, created through mating, could result in new mutations that could be the raw material of adaptive evolution in yeast populations
Can an Integrated Approach Reduce Child Vulnerability to Anaemia? Evidence from Three African Countries.
Addressing the complex, multi-factorial causes of childhood anaemia is best done through integrated packages of interventions. We hypothesized that due to reduced child vulnerability, a "buffering" of risk associated with known causes of anaemia would be observed among children living in areas benefiting from a community-based health and nutrition program intervention. Cross-sectional data on the nutrition and health status of children 24-59 mo (N = 2405) were obtained in 2000 and 2004 from program evaluation surveys in Ghana, Malawi and Tanzania. Linear regression models estimated the association between haemoglobin and immediate, underlying and basic causes of child anaemia and variation in this association between years. Lower haemoglobin levels were observed in children assessed in 2000 compared to 2004 (difference -3.30 g/L), children from Tanzania (-9.15 g/L) and Malawi (-2.96 g/L) compared to Ghana, and the youngest (24-35 mo) compared to oldest age group (48-59 mo; -5.43 g/L). Children who were stunted, malaria positive and recently ill also had lower haemoglobin, independent of age, sex and other underlying and basic causes of anaemia. Despite ongoing morbidity, risk of lower haemoglobin decreased for children with malaria and recent illness, suggesting decreased vulnerability to their anaemia-producing effects. Stunting remained an independent and unbuffered risk factor. Reducing chronic undernutrition is required in order to further reduce child vulnerability and ensure maximum impact of anaemia control programs. Buffering the impact of child morbidity on haemoglobin levels, including malaria, may be achieved in certain settings
Effective Rheology of Bubbles Moving in a Capillary Tube
We calculate the average volumetric flux versus pressure drop of bubbles
moving in a single capillary tube with varying diameter, finding a square-root
relation from mapping the flow equations onto that of a driven overdamped
pendulum. The calculation is based on a derivation of the equation of motion of
a bubble train from considering the capillary forces and the entropy production
associated with the viscous flow. We also calculate the configurational
probability of the positions of the bubbles.Comment: 4 pages, 1 figur
Patient characteristics associated with differences in patients' evaluation of their general practitioner
<p>Abstract</p> <p>Background</p> <p>Knowledge of the extent to which patient characteristics are systematically associated with variation in patient evaluations will enable us to adjust for differences between practice populations and thereby compare GPs. Whether this is appropriate depends on the purpose for which the patient evaluation was conducted. Associations between evaluations and patient characteristics may reflect gaps in the quality of care or may be due to inherent characteristics of the patients. This study aimed to determine such associations in a setting with a comprehensive list system and gate-keeping.</p> <p>Methods</p> <p>A nationwide Danish patient evaluation survey among voluntarily participating GPs using the EUROPEP questionnaire, which produced 28,260 patient evaluations (response rate 77.3%) of 365 GPs. In our analyses we compared the prevalence of positive evaluations in groups of patients.</p> <p>Results</p> <p>We found a positive GP assessment to be strongly associated with increasing patient age and increasing frequency of attendance. Patients reporting a chronic condition were more positive, whereas a low self-rated health was strongly associated with less positive scores also after adjustment. The association between patient gender and assessment was weak and inconsistent and depended on the focus. We found no association either with the patients' educational level or with the duration of listing with the GP even after adjusting for patient characteristics.</p> <p>Conclusion</p> <p>Adjustment for patient differences may produce a more fair comparison between GPs, but may also blur the assessment of GPs' ability to meet the needs of the populations actually served. On the other hand, adjusted results will enable us to describe the significance of specific patient characteristics to patients' experience of care.</p
- …