Thickness characterization toolbox for transparent protective coatings on polymer substrates

The thickness characterization of transparent protective coatings on functional, transparent materials is often problematic. In this paper, a toolbox to determine the thicknesses of a transparent coating on functional window films is presented. The toolbox consists of a combination of secondary ion mass spectrometry and profilometry and can be transferred to other transparent polymeric materials. A coating was deposited on designed model samples, which were characterized with cross-sectional views in transmission and in scanning/transmission electron microscopy and ellipsometry. The toolbox was then used to assess the thicknesses of the protective coatings on the pilot-scale window films. This coating was synthesized using straightforward sol-gel alkoxide chemistry. The kinetics of the condensation are studied in order to obtain a precursor that allows fast drying and complete condensation after simple heat treatment. The shelf life of this precursor solution was investigated in order to verify its accordance to industrial requirements. Deposition was performed successfully at low temperatures below 100 °C, which makes deposition on polymeric foils possible. By using roll-to-roll coating, the findings of this paper are easily transferrable to industrial scale. The coating was tested for scratch resistance and adhesion. Values for the emissivity (ε) of the films were recorded to justify the use of the films obtained as infrared reflective window films. In this work, it is shown that the toolbox measures similar thicknesses to those measured by electron microscopy and can be used to set a required thickness for protective coatings

Thermo-Mechanical Treatment Effects on Stress Relaxation and Hydrogen Embrittlement of Cold-Drawn Eutectoid Steels

The effects of the temperature and stretching levels used in the stress-relieving treatment of cold-drawn eutectoid steel wires are evaluated with the aim of improving the stress relaxation behavior and the resistance to hydrogen embrittlement. Five industrial treatments are studied, combining three temperatures (330, 400, and 460 °C) and three stretching levels (38, 50 and 64% of the rupture load). The change of the residual stress produced by the treatments is taken into consideration to account for the results. Surface residual stresses allow us to explain the time to failure in standard hydrogen embrittlement test

Reliability of electronic drivers: An industrial approach

Reliability of electronic drivers, or systems, is crucial for the business of Signify. We manufacture and sell more than a million drivers per year. Field returns taught us what failure modes are important, but this is not sufficient to provide lifetime claims for our products. Being in this business for almost a century, in order to provide detailed lifetime claims, we have established an internal reliability tool. This tool provides our designers the correct information for flawless driver development. The specially developed Electronics Reliability Tool (ERT) uses on the one hand FIT tables provided by handbooks like e.g., Telcordia and on the other hand also considers wear-out mechanisms due to e.g., lightning strikes. Validation and verification of our predictions is performed by collecting sold quantities, field returns, do extensive failure analysis and compare these values with calculated ones. Each internally designed driver is subjected to an ERT calculation. The forecasted lifetime is used as a yard stick to witness the drivers' targeted lifetime. In our presentation we will demonstrate the tool. In this paper, we describe details of how ERT calculates failure rates. We will also present the comparison between field performance and calculated values of our electronic drivers.Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Electronic Components, Technology and Material

Vitamin E deficiency in dogs with retinal pigment epithelial dystrophy.

The role of vitamin E deficiency in the development of retinal pigment epithelial dystrophy was investigated in 11 cocker spaniels and four other dogs. The concentration of alpha-tocopherol was measured by high performance liquid chromatography in plasma samples obtained from the affected dogs and from 28 ophthalmoscopically normal, healthy control dogs. The mean (sd) plasma alpha-tocopherol concentration in the normal dogs was 20.2 (7.1) microg/ml, compared with 1.14 (0.67) microg/ml in the 11 affected cocker spaniels. The difference between the two groups remained highly significant when the alpha-tocopherol concentrations were expressed relative to the concentrations of the plasma lipids cholesterol and triglycerides. Low plasma concentrations of alpha-tocopherol were observed in the four affected dogs of other breeds, but the finding was not so consistent. The plasma lipid concentrations were normal in the affected dogs. The deficiency of alpha-tocopherol in the affected dogs appeared to be primary, because there was no clinical, biochemical or pathological evidence of underlying disease, or any indication of a dietary deficiency which might have contributed to the low concentrations of alpha-tocopherol.Journal ArticleResearch Support, Non-U.S. Gov'tSCOPUS: ar.jinfo:eu-repo/semantics/publishe

Clinical and pathological observations in English cocker spaniels with primary metabolic vitamin E deficiency and retinal pigment epithelial dystrophy.

Fifteen English cocker spaniels with confirmed vitamin E deficiency were examined physically, ophthalmologically and neurologically. Eleven of them had clinical signs of neurological dysfunction which included ataxia, proprioceptive deficits, abnormal spinal reflexes and muscle weakness. In the two dogs examined histopathologically there was central neuronal fibre degeneration with prominent neuroaxonal dystrophy, particularly within the sensory relay nuclei of the brainstem, and one of the dogs had severe intestinal lipofuscinosis.Journal ArticleResearch Support, Non-U.S. Gov'tinfo:eu-repo/semantics/publishe

Three-dimensional microscale modelling of CO2 transport and light propagation in tomato leaves enlightens photosynthesis

We present a combined three-dimensional (3-D) model of light propagation, CO2 diffusion and photosynthesis in tomato (Solanum lycopersicum L.) leaves. The model incorporates a geometrical representation of the actual leaf microstructure that we obtained with synchrotron radiation X-ray laminography, and was evaluated using measurements of gas exchange and leaf optical properties. The combination of the 3-D microstructure of leaf tissue and chloroplast movement induced by changes in light intensity affects the simulated CO2 transport within the leaf. The model predicts extensive reassimilation of CO2 produced by respiration and photorespiration. Simulations also suggest that carbonic anhydrase could enhance photosynthesis at low CO2 levels but had little impact on photosynthesis at high CO2 levels. The model con¿rms that scaling of photosynthetic capacity with absorbed light would improve ef¿ciency of CO2 ¿xation in the leaf, especially at low light intensity