Solid state photomultiplier for astronomy, phase 2

Epitaxial layers with varying donor concentration profiles were grown on silicon substrate wafers using chemical vapor deposition (CVD) techniques, and solid state photomultiplier (SSPM) devices were fabricated from the wafers. Representative detectors were tested in a low background photon flux, low temperature environment to determine the device characteristics for comparison to NASA goals for astronomical applications. The SSPM temperatures varied between 6 and 11 K with background fluxes in the range from less than 5 x 10 to the 6th power to 10 to the 13th power photons/square cm per second at wavelengths of 3.2 and 20 cm. Measured parameters included quantum efficiency, dark count rate and bias current. Temperature for optimal performance is 10 K, the highest ever obtained for SSPMs. The devices exhibit a combination of the lowest dark current and highest quantum efficiency yet achieved. Experimental data were reduced, analyzed and used to generate recommendations for future studies. The background and present status of the microscopic theory of SSPM operation were reviewed and summarized. Present emphasis is on modeling of the avalanche process which is the basis for SSPM operation. Approaches to the solution of the Boltzmann transport equation are described and the treatment of electron scattering mechanisms is presented. The microscopic single-electron transport theory is ready to be implemented for large-scale computations

On Conceptually Simple Algorithms for Variants of Online Bipartite Matching

We present a series of results regarding conceptually simple algorithms for bipartite matching in various online and related models. We first consider a deterministic adversarial model. The best approximation ratio possible for a one-pass deterministic online algorithm is $1/2$, which is achieved by any greedy algorithm. D\"urr et al. recently presented a $2$-pass algorithm called Category-Advice that achieves approximation ratio $3/5$. We extend their algorithm to multiple passes. We prove the exact approximation ratio for the $k$-pass Category-Advice algorithm for all $k \ge 1$, and show that the approximation ratio converges to the inverse of the golden ratio $2/(1+\sqrt{5}) \approx 0.618$ as $k$ goes to infinity. The convergence is extremely fast --- the $5$-pass Category-Advice algorithm is already within $0.01\%$ of the inverse of the golden ratio. We then consider a natural greedy algorithm in the online stochastic IID model---MinDegree. This algorithm is an online version of a well-known and extensively studied offline algorithm MinGreedy. We show that MinDegree cannot achieve an approximation ratio better than $1-1/e$, which is guaranteed by any consistent greedy algorithm in the known IID model. Finally, following the work in Besser and Poloczek, we depart from an adversarial or stochastic ordering and investigate a natural randomized algorithm (MinRanking) in the priority model. Although the priority model allows the algorithm to choose the input ordering in a general but well defined way, this natural algorithm cannot obtain the approximation of the Ranking algorithm in the ROM model

Analysis of grain-boundary structure in Al–Cu interconnects

The role of crystallographic texture in electromigration resistance of interconnect lines is well documented. The presence of a strong (111) fiber texture results in a more reliable interconnect structure. It is also generally accepted that grain-boundary diffusion is the primary mechanism by which electromigration failures occur. It has been difficult to this point, however, to obtain statistically reliable information of grain-boundary structure in these materials as transmission electron microscopy investigations are limited by tedious specimen preparation and small, nonrepresentative, imaging regions. The present work focuses upon characterization of texture and grain-boundary structure of interconnect lines using orientation imaging microscopy, and particularly, upon the linewidth dependence of these measures. Conventionally processed Al–1%Cu lines were investigated to determine the affects of a postpatterning anneal on boundary structure as a function of linewidth. It was observed that texture tended to strengthen slightly with decreasing linewidth subsequent to the anneal procedure. Grain morphology changed substantially as the narrow lines became near bamboo in character and the crystallographic character of the boundary plane changed as a function of linewidth. These results are contrasted with those obtained from Al–1%Cu lines, which were fabricated using the damascene process. The damascene lines show a marked weakening in texture as the linewidth decreases, accompanied by a more random misorientation distribution. A description of the competing energetics, which result in the observed microstructures, is included. © 1997 American Institute of Physics.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/71133/2/JAPIAU-82-5-2383-1.pd

Bone stress injury of the ankle in professional ballet dancers seen on MRI

<p>Abstract</p> <p>Background</p> <p>Ballet Dancers have been shown to have a relatively high incidence of stress fractures of the foot and ankle. It was our objective to examine MR imaging patterns of bone marrow edema (BME) in the ankles of high performance professional ballet dancers, to evaluate clinical relevance.</p> <p>Methods</p> <p>MR Imaging was performed on 12 ankles of 11 active professional ballet dancers (6 female, 5 male; mean age 24 years, range 19 to 32). Individuals were imaged on a 0.2 T or 1.5 T MRI units. Images were evaluated by two musculoskeletal radiologists and one orthopaedic surgeon in consensus for location and pattern of bone marrow edema. In order to control for recognized sources of bone marrow edema, images were also reviewed for presence of osseous, ligamentous, tendinous and cartilage injuries. Statistical analysis was performed to assess the strength of the correlation between bone marrow edema and ankle pain.</p> <p>Results</p> <p>Bone marrow edema was seen only in the talus, and was a common finding, observed in nine of the twelve ankles imaged (75%) and was associated with pain in all cases. On fluid-sensitive sequences, bone marrow edema was ill-defined and centered in the talar neck or body, although in three cases it extended to the talar dome. No apparent gender predilection was noted. No occult stress fracture could be diagnosed. A moderately strong correlation (phi = 0.77, p= 0.0054) was found between edema and pain in the study population.</p> <p>Conclusion</p> <p>Bone marrow edema seems to be a specific MRI finding in the talus of professional ballet dancers, likely related to biomechanical stress reactions, due to their frequently performed unique maneuvers. Clinically, this condition may indicate a sign of a bone stress injury of the ankle.</p

Neighbourhood, Route and Workplace-Related Environmental Characteristics Predict Adults' Mode of Travel to Work

Commuting provides opportunities for regular physical activity which can reduce the risk of chronic disease. Commuters' mode of travel may be shaped by their environment, but understanding of which specific environmental characteristics are most important and might form targets for intervention is limited. This study investigated associations between mode choice and a range of objectively assessed environmental characteristics.Participants in the Commuting and Health in Cambridge study reported where they lived and worked, their usual mode of travel to work and a variety of socio-demographic characteristics. Using geographic information system (GIS) software, 30 exposure variables were produced capturing characteristics of areas around participants' homes and workplaces and their shortest modelled routes to work. Associations between usual mode of travel to work and personal and environmental characteristics were investigated using multinomial logistic regression.Of the 1124 respondents, 50% reported cycling or walking as their usual mode of travel to work. In adjusted analyses, home-work distance was strongly associated with mode choice, particularly for walking. Lower odds of walking or cycling rather than driving were associated with a less frequent bus service (highest versus lowest tertile: walking OR 0.61 [95% CI 0.20–1.85]; cycling OR 0.43 [95% CI 0.23–0.83]), low street connectivity (OR 0.22, [0.07–0.67]; OR 0.48 [0.26–0.90]) and free car parking at work (OR 0.24 [0.10–0.59]; OR 0.55 [0.32–0.95]). Participants were less likely to cycle if they had access to fewer destinations (leisure facilities, shops and schools) close to work (OR 0.36 [0.21–0.62]) and a railway station further from home (OR 0.53 [0.30–0.93]). Covariates strongly predicted travel mode (pseudo r-squared 0.74).Potentially modifiable environmental characteristics, including workplace car parking, street connectivity and access to public transport, are associated with travel mode choice, and could be addressed as part of transport policy and infrastructural interventions to promote active commuting

Electrically controlled long-distance spin transport through an antiferromagnetic insulator

Spintronics uses spins, the intrinsic angular momentum of electrons, as an alternative for the electron charge. Its long-term goal is in the development of beyond-Moore low dissipation technology devices. Recent progress demonstrated the long-distance transport of spin signals across ferromagnetic insulators. Antiferromagnetically ordered materials are however the most common class of magnetic materials with several crucial advantages over ferromagnetic systems. In contrast to the latter, antiferromagnets exhibit no net magnetic moment, which renders them stable and impervious to external fields. In addition, they can be operated at THz frequencies. While fundamentally their properties bode well for spin transport, previous indirect observations indicate that spin transmission through antiferromagnets is limited to short distances of a few nanometers. Here we demonstrate the long-distance, over tens of micrometers, propagation of spin currents through hematite (\alpha-Fe2O3), the most common antiferromagnetic iron oxide, exploiting the spin Hall effect for spin injection. We control the spin current flow by the interfacial spin-bias and by tuning the antiferromagnetic resonance frequency with an external magnetic field. This simple antiferromagnetic insulator is shown to convey spin information parallel to the compensated moment (N\'eel order) over distances exceeding tens of micrometers. This newly-discovered mechanism transports spin as efficiently as the net magnetic moments in the best-suited complex ferromagnets. Our results pave the way to ultra-fast, low-power antiferromagnet-insulator-based spin-logic devices that operate at room temperature and in the absence of magnetic fields

CAR-T cell. the long and winding road to solid tumors

Adoptive cell therapy of solid tumors with reprogrammed T cells can be considered the "next generation" of cancer hallmarks. CAR-T cells fail to be as effective as in liquid tumors for the inability to reach and survive in the microenvironment surrounding the neoplastic foci. The intricate net of cross-interactions occurring between tumor components, stromal and immune cells leads to an ineffective anergic status favoring the evasion from the host's defenses. Our goal is hereby to trace the road imposed by solid tumors to CAR-T cells, highlighting pitfalls and strategies to be developed and refined to possibly overcome these hurdles