Development of resins for composites by resin transfer molding

Designed to cover a wide range of resin technology and to meet the near-term and long-term needs of the aircraft industry, this research has three objectives: to produce resin transfer molding (RES) resins with improved processability, to produce prepreg systems with high toughness and service temperature, and to produce new resin systems. Progress on reaching the objectives is reported

Performance of a family of omni and steered antennas for mobile satellite applications

The design and performance of a family of vehicle antennas developed at JPL in support of an emerging US Mobile Satellite Service (MSS) system are described. Test results of the antennas are presented. Trends for future development are addressed. Recommendations on design approaches for vehicle antennas of the first generation MSS are discussed

Detection of volatile organic compounds (VOCs) using an optical fibre long period grating with a calixarene anchored mesoporous thin film

A long period grating (LPG) modified with a mesoporous film infused with a functional compound, calix[4]arene, was employed for the detection of volatile organic compounds (VOCs). The mesoporous film consisted of an inorganic part, of SiO2 nanoparticles (NPs) along with an organic moiety of poly(allylamine hydrochloride) polycation PAH, which was finally infused with functional compound, p-sulphanatocalix[4]arene (CA[4]). The LPG sensor was designed to operate at the phase matching turning point to provide the highest sensitivity. The sensing mechanism is based on the measurement of the refractive index (RI) change induced by the complexion of the VOCs with calix[4]arene (CA). The LPG modified with 5 cycles of (SiO2 NPs/PAH)5PAA responded to exposure to chloroform and benzene vapours. The sensitivity to humidity as an interfering parameter was also investigated

Fiber-diffraction Interferometer using Coherent Fiber Optic Taper

We present a fiber-diffraction interferometer using a coherent fiber optic taper for optical testing in an uncontrolled environment. We use a coherent fiber optic taper and a single-mode fiber having thermally-expanded core. Part of the measurement wave coming from a test target is condensed through a fiber optic taper and spatially filtered from a single-mode fiber to be reference wave. Vibration of the cavity between the target and the interferometer probe is common to both reference and measurement waves, thus the interference fringe is stabilized in an optical way. Generation of the reference wave is stable even with the target movement. Focus shift of the input measurement wave is desensitized by a coherent fiber optic taper

Irreversible Deposition of Line Segment Mixtures on a Square Lattice: Monte Carlo Study

We have studied kinetics of random sequential adsorption of mixtures on a square lattice using Monte Carlo method. Mixtures of linear short segments and long segments were deposited with the probability $p$ and $1-p$, respectively. For fixed lengths of each segment in the mixture, the jamming limits decrease when $p$ increases. The jamming limits of mixtures always are greater than those of the pure short- or long-segment deposition. For fixed $p$ and fixed length of the short segments, the jamming limits have a maximum when the length of the long segment increases. We conjectured a kinetic equation for the jamming coverage based on the data fitting.Comment: 7 pages, latex, 5 postscript figure

Liquid-like behaviour of gold nanowire bridges

A combination of Focused Ion Beam (FIB) and Reactive Ion Etch (RIE) was used to fabricate free standing gold nanowire bridges with radii of 30 nm and below. These were subjected to point loading to failure at their mid-points using an Atomic Force Microscope (AFM), providing strength and deformation data. The results demonstrate a dimensionally dependent transition from conventional solid metallic properties to liquid-like behaviour including the unexpected reformation of a fractured bridge. The work reveals mechanical and materials properties of nanowires which could have significant impact on nanofabrication processes and nanotechnology devices such as Nano Electro Mechanical Systems (NEMS)