Characterization and topical delivery of phenylethyl resorcinol

Objective: Phenylethyl resorcinol (PR) has been used widely in the personal care industry as a novel skin lightening ingredient. Surprisingly, there is only limited information describing the physicochemical properties of this active. Therefore, the primary objective of this study was to perform a comprehensive characterization of PR. A secondary objective was to investigate the delivery of this molecule to mammalian skin. Methods: Phenylethyl resorcinol was characterized using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and nuclear magnetic resonance (NMR). A new high‐performance liquid chromatographic (HPLC) method for analysis of PR was developed and validated. The log P (octanol water partition coefficient), value, solubility and short‐term stability of PR in a series of vehicles were also determined using HPLC. The evaporation of the selected vehicles was examined using dynamic vapour sorption (DVS). The permeation profiles of PR were investigated under finite dose conditions in porcine and human skin. Results: The melting point of PR was determined to be 79.13 °C and the measured log P (octanol water partition coefficient) at 21 °C was 3.35 ± 0.03. The linearity of the HPLC analytical method was confirmed with an r2 value of 0.99. Accuracy of the method was evaluated by average recovery rates at three tested concentrations, and the values ranged from 99 to 106%. The limit of detection (LOD) and limit of quantification (LOQ) were 0.19 and 0.57 μg mL−1, respectively. The solubility of PR in PG, DMI, glycerol was within the range of 367 to 877 mg mL−1. The stability of PR in tested solvents was also confirmed by the 72 h stability studies. From the DVS studies, 70–125% of applied formulations were recovered at 24 h. The permeation through porcine skin at 24 h ranged from 4 to 13 μg cm−2, while the corresponding amounts of PR delivered through human skin were 2 to 10 μg cm−2. Conclusion: The physicochemical properties of PR confirm it is suitable for dermal delivery. In this study, propylene glycol was the most promising vehicle for PR delivery to human skin. Future work will expand the range of vehicles studied and explore the percutaneous absorption from more complex formulations

A new polymorphic material? Structural degeneracy of ZrMn_2

Based on density functional calculations, we propose that ZrMn_2 is a polymorphic material. We predict that at low temperatures the cubic C15, and the hexagonal C14 and C36 structures of the Laves phase compound ZrMn_2 are nearly equally stable within 0.3 kJmol^{-1} or 30 K. This degeneracy occurs when the Mn atoms magnetize spontaneously in a ferromagnetic arrangement forming the states of lowest energy. From the temperature dependent free energies at T approx 160K we predict a transition from the most stable C15 to the C14 structure, which is the experimentally observed structure at elevated temperatures.Comment: 4 pages, 3 figure

Implementing virtual collaborative inquiry practises in a middle-school context

The aim of the present study was to investigate the challenges that relate to the implementation of virtual inquiry practises in middle school. The case was a school course in which a group of Finnish students (N = 14) and teachers (N = 7) completed group inquiries through virtual collaboration, using a web-based learning environment. The task was to accomplish a cross-disciplinary inquiry into cultural issues. The students worked mainly at home and took much responsibility for their course achievements. The investigators analysed the pedagogical design of the course and the content of the participants' interaction patterns in the web-based environment, using qualitative content analysis and social network analysis. The findings suggest that the students succeeded in producing distinctive cultural products, and both the students and the teachers adopted novel roles during the inquiry. The web-based learning environment was used more as a coordination tool for organizing the collaborative work than as a forum for epistemic inquiry. The tension between the school curriculum and the inquiry practises was manifest in the participants' discussions of the assessment criteria of the course.The aim of the present study was to investigate the challenges that relate to the implementation of virtual inquiry practises in middle school. The case was a school course in which a group of Finnish students (N = 14) and teachers (N = 7) completed group inquiries through virtual collaboration, using a web-based learning environment. The task was to accomplish a cross-disciplinary inquiry into cultural issues. The students worked mainly at home and took much responsibility for their course achievements. The investigators analysed the pedagogical design of the course and the content of the participants' interaction patterns in the web-based environment, using qualitative content analysis and social network analysis. The findings suggest that the students succeeded in producing distinctive cultural products, and both the students and the teachers adopted novel roles during the inquiry. The web-based learning environment was used more as a coordination tool for organizing the collaborative work than as a forum for epistemic inquiry. The tension between the school curriculum and the inquiry practises was manifest in the participants' discussions of the assessment criteria of the course.The aim of the present study was to investigate the challenges that relate to the implementation of virtual inquiry practises in middle school. The case was a school course in which a group of Finnish students (N = 14) and teachers (N = 7) completed group inquiries through virtual collaboration, using a web-based learning environment. The task was to accomplish a cross-disciplinary inquiry into cultural issues. The students worked mainly at home and took much responsibility for their course achievements. The investigators analysed the pedagogical design of the course and the content of the participants' interaction patterns in the web-based environment, using qualitative content analysis and social network analysis. The findings suggest that the students succeeded in producing distinctive cultural products, and both the students and the teachers adopted novel roles during the inquiry. The web-based learning environment was used more as a coordination tool for organizing the collaborative work than as a forum for epistemic inquiry. The tension between the school curriculum and the inquiry practises was manifest in the participants' discussions of the assessment criteria of the course.Peer reviewe

Protecting High Energy Barriers: A New Equation to Regulate Boost Energy in Accelerated Molecular Dynamics Simulations

Molecular dynamics (MD) is one of the most common tools in computational chemistry. Recently, our group has employed accelerated molecular dynamics (aMD) to improve the conformational sampling over conventional molecular dynamics techniques. In the original aMD implementation, sampling is greatly improved by raising energy wells below a predefined energy level. Recently, our group presented an alternative aMD implementation where simulations are accelerated by lowering energy barriers of the potential energy surface. When coupled with thermodynamic integration simulations, this implementation showed very promising results. However, when applied to large systems, such as proteins, the simulation tends to be biased to high energy regions of the potential landscape. The reason for this behavior lies in the boost equation used since the highest energy barriers are dramatically more affected than the lower ones. To address this issue, in this work, we present a new boost equation that prevents oversampling of unfavorable high energy conformational states. The new boost potential provides not only better recovery of statistics throughout the simulation but also enhanced sampling of statistically relevant regions in explicit solvent MD simulations

Protonation States of Remote Residues Affect Binding-Release Dynamics of the Ligand but not the Conformation of apo Ferric Binding Protein

We have studied the apo (Fe3+ free) form of periplasmic ferric binding protein (FbpA) under different conditions and we have monitored the changes in the binding and release dynamics of H2PO4- that acts as a synergistic anion in the presence of Fe3+. Our simulations predict a dissociation constant of 2.2$\pm$0.2 mM which is in remarkable agreement with the experimentally measured value of 2.3$\pm$0.3 mM under the same ionization strength and pH conditions. We apply perturbations relevant for changes in environmental conditions as (i) different values of ionic strength (IS), and (ii) protonation of a group of residues to mimic a different pH environment. Local perturbations are also studied by protonation or mutation of a site distal to the binding region that is known to mechanically manipulate the hinge-like motions of FbpA. We find that while the average conformation of the protein is intact in all simulations, the H2PO4- dynamics may be substantially altered by the changing conditions. In particular, the bound fraction which is 20$\%$ for the wild type system is increased to 50$\%$ with a D52A mutation/protonation and further to over 90$\%$ at the protonation conditions mimicking those at pH 5.5. The change in the dynamics is traced to the altered electrostatic distribution on the surface of the protein which in turn affects hydrogen bonding patterns at the active site. The observations are quantified by rigorous free energy calculations. Our results lend clues as to how the environment versus single residue perturbations may be utilized for regulation of binding modes in hFbpA systems in the absence of conformational changes.Comment: 26 pages, 4 figure

Computational Approaches and Analysis for a Spatio-Structural-Temporal Invasive Carcinoma Model

Spatio-temporal models have long been used to describe biological systems of cancer, but it has not been until very recently that increased attention has been paid to structural dynamics of the interaction between cancer populations and the molecular mechanisms associated with local invasion. One system that is of particular interest is that of the urokinase plasminogen activator (uPA) wherein uPA binds uPA receptors on the cancer cell surface, allowing plasminogen to be cleaved into plasmin, which degrades the extracellular matrix and this way leads to enhanced cancer cell migration. In this paper, we develop a novel numerical approach and associated analysis for spatio-structuro-temporal modelling of the uPA system for up to two-spatial and two-structural dimensions. This is accompanied by analytical exploration of the numerical techniques used in simulating this system, with special consideration being given to the proof of stability within numerical regimes encapsulating a central differences approach to approximating numerical gradients. The stability analysis performed here reveals instabilities induced by the coupling of the structural binding and proliferative processes. The numerical results expound how the uPA system aids the tumour in invading the local stroma, whilst the inhibitor to this system may impede this behaviour and encourage a more sporadic pattern of invasion.PostprintPeer reviewe

Dizaj i statistička optimizacija liposfera s glipizidom pomoću metodologije odgovora površine

A 32 factorial design was employed to produce glipizide lipospheres by the emulsification phase separation technique using paraffin wax and stearic acid as retardants. The effect of critical formulation variables, namely levels of paraffin wax (X1) and proportion of stearic acid in the wax (X2) on geometric mean diameter (dg), percent encapsulation efficiency (% EE), release at the end of 12 h (rel12) and time taken for 50% of drug release (t50), were evaluated using the F-test. Mathematical models containing only the significant terms were generated for each response parameter using the multiple linear regression analysis (MLRA) and analysis of variance (ANOVA). Both formulation variables studied exerted a significant influence (p < 0.05) on the response parameters. Numerical optimization using the desirability approach was employed to develop an optimized formulation by setting constraints on the dependent and independent variables. The experimental values of dg, % EE, rel12 and t50 values for the optimized formulation were found to be 57.54 ± 1.38 µm, 86.28 ± 1.32 %, 77.23 ± 2.78 % and 5.60 ± 0.32 h, respectively, which were in close agreement with those predicted by the mathematical models. The drug release from lipospheres followed first-order kinetics and was characterized by the Higuchi diffusion model. The optimized liposphere formulation developed was found to produce sustained anti-diabetic activity following oral administration in rats.32 faktorijalni dizajn primijenjen je za pripravu liposfera s glipizidom metodom separacije pomoću emulzija koristeći parafinski vosak i starinsku kiselinu kao tvari za usporavanje. Pomoću F-testa praćen je učinak kritičnih varijabli tijekom formuliranja, tj. količina parafinskog voska (X1) i udio stearinske kiseline (X2) na srednji promjer liposfera (dg), postotak inkapsulirane ljekovite tvari (% EE), oslobađanje ljekovite tvari nakon 12 h (rel12) te vrijeme potrebno za oslobađanje 50% ljekovite tvari (t50). Pomoću multiple linearne regresijske analize (MLRA) i analize varijabli (ANOVA) za svaki su parametar načinjeni matematički modeli koji sadrže samo značajne varijable. Proučavanje varijabli na oba načina ukazalo je na njihov značajan utjecaj (p < 0,05) na parametre liposfera. Postavljanjem ograničenja na zavisne i nezavisne varijable provedena je numerička optimizacija na principu poželjnosti. Eksperimentalne vrijednosti dg, % EE, rel12 i t50 optimiziranih formulacija bile su 57,54 ± 1,38 µm, 86,28 ± 1,32%, 77,23 ± 2,78% i 5,60 ± 0,32 h. Dobivene eksperimentalne vrijednosti iznosile su vrlo slične vrijednostima predviđenim matematičkim modelima. Oslobađanje glipizida iz liposfera slijedio je kinetiku prvog reda i okarakterizirano je Higuchijevim difuzijskim modelom. Optimizirane liposfere su nakon peroralne primjene na štakorima pokazale produljeni antidijabetički učinak

Structured models of cell migration incorporating molecular binding processes

The dynamic interplay between collective cell movement and the various molecules involved in the accompanying cell signalling mechanisms plays a crucial role in many biological processes including normal tissue development and pathological scenarios such as wound healing and cancer. Information about the various structures embedded within these processes allows a detailed exploration of the binding of molecular species to cell-surface receptors within the evolving cell population. In this paper we establish a general spatio-temporal-structural framework that enables the description of molecular binding to cell membranes coupled with the cell population dynamics. We first provide a general theoretical description for this approach and then illustrate it with two examples arising from cancer invasion