1,798 research outputs found

    An approximate buckling analysis for rectangular orthotropic plates with centrally located cutouts

    Get PDF
    An approximate analysis for predicting buckling of rectangular orthotropic composite plates with centrally located cutouts is presented. In this analysis, prebuckling and buckling problems are converted from a two-dimensional to a one-dimensional system of linear differential equations with variable coefficients. The conversion is accomplished by expressing the displacements as series with each element containing a trigonometric function of one coordinate and a coefficient that is an arbitrary function of the other coordinate. Ordinary differential equations are then obtained from a variational principle. Analytical results obtained from the approximate analysis are compared with finite element analyses for isotropic plates and for specially orthotropic plates with central circular cutouts of various sizes. Experimental results for the specially orthotropic plates are also presented. In nearly all cases, the approximate analysis predicts the buckling mode shapes correctly and predicts the buckling loads to within a few percent of the finite element and experimental results

    Nonlinear shell analyses of the space shuttle solid rocket boosters

    Get PDF
    A variety of structural analyses have been performed on the Solid Rocket Boosters (SRB's) to provide information that would contribute to the understanding of the failure which destroyed the Space Shuttle Challenger. This paper describes nonlinear shell analyses that were performed to characterize the behavior of an overall SRB structure and a segment of the SRB in the vicinity of the External Tank Attachment (ETA) ring. Shell finite element models were used that would accurately reflect the global load transfer in an SRB in a manner such that nonlinear shell collapse and ovalization could be assessed. The purpose of these analyses was to calculate the overall deflection and stress distributions for these SRB models when subjected to mechanical loads corresponding to critical times during the launch sequence. Static analyses of these SRB models were performed using a snapshot picture of the loads. Analytical results obtained using these models show no evidence of nonlinear shell collapse for the pre-liftoff loading cases considered

    Preliminary 2-D shell analysis of the space shuttle solid rocket boosters

    Get PDF
    A two-dimensional shell model of an entire solid rocket booster (SRB) has been developed using the STAGSC-1 computer code and executed on the Ames CRAY computer. The purpose of these analyses is to calculate the overall deflection and stress distributions for the SRB when subjected to mechanical loads corresponding to critical times during the launch sequence. The mechanical loading conditions for the full SRB arise from the external tank (ET) attachment points, the solid rocket motor (SRM) pressure load, and the SRB hold down posts. The ET strut loads vary with time after the Space Shuttle main engine (SSME) ignition. The SRM internal pressure varies axially by approximately 100 psi. Static analyses of the full SRB are performed using a snapshot picture of the loads. The field and factory joints are modeled by using equivalent stiffness joints instead of detailed models of the joint. As such, local joint behavior cannot be obtained from this global model

    Stress Analysis of Composite Cylindrical Shells with an Elliptical Cutout

    Get PDF
    A special-purpose, semi-analytical solution method for determining the stress and deformation fields in a thin laminated-composite cylindrical shell with an elliptical cutout is presented. The analysis includes the effects of cutout size, shape, and orientation; non-uniform wall thickness; oval-cross-section eccentricity; and loading conditions. The loading conditions include uniform tension, uniform torsion, and pure bending. The analysis approach is based on the principle of stationary potential energy and uses Lagrange multipliers to relax the kinematic admissibility requirements on the displacement representations through the use of idealized elastic edge restraints. Specifying appropriate stiffness values for the elastic extensional and rotational edge restraints (springs) allows the imposition of the kinematic boundary conditions in an indirect manner, which enables the use of a broader set of functions for representing the displacement fields. Selected results of parametric studies are presented for several geometric parameters that demonstrate that analysis approach is a powerful means for developing design criteria for laminated-composite shells

    Hot subdwarf stars and their connection to thermonuclear supernovae

    Get PDF
    Hot subdwarf stars (sdO/Bs) are evolved core helium-burning stars with very thin hydrogen envelopes, which can be formed by common envelope ejection. Close sdB binaries with massive white dwarf (WD) companions are potential progenitors of thermonuclear supernovae type Ia (SN Ia). We discovered such a progenitor candidate as well as a candidate for a surviving companion star, which escapes from the Galaxy. More candidates for both types of objects have been found by crossmatching known sdB stars with proper motion and light curve catalogues. The Gaia mission will provide accurate astrometry and light curves of all the stars in our hot subdwarf sample and will allow us to compile a much larger all-sky catalogue of those stars. In this way we expect to find hundreds of progenitor binaries and ejected companions.Comment: Proceedings of the 11th Pacific Rim Conference on Stellar Astrophysics, Hong Kong 2015, Journal of Physics: Conference Series, in pres

    Stress Analysis of Composite Cylindrical Shells With an Elliptical Cutout

    Get PDF
    A special-purpose, semi-analytical solution method for determining the stress and deformation fields in a thin laminated-composite cylindrical shell with an elliptical cutout is presented. The analysis includes the effects of cutout size, shape, and orientation; nonuniform wall thickness; oval-cross-section eccentricity; and loading conditions. The loading conditions include uniform tension, uniform torsion, and pure bending. The analysis approach is based on the principle of stationary potential energy and uses Lagrange multipliers to relax the kinematic admissibility requirements on the displacement representations through the use of idealized elastic edge restraints. Specifying appropriate stiffness values for the elastic extensional and rotational edge restraints (springs) allows the imposition of the kinematic boundary conditions in an indirect manner, which enables the use of a broader set of functions for representing the displacement fields. Selected results of parametric studies are presented for several geometric parameters that demonstrate that analysis approach is a powerful means for developing design criteria for laminated-composite shells

    The orbits of subdwarf-B + main-sequence binaries. II. Three eccentric systems; BD+29 3070, BD +34 1543 and Feige 87

    Full text link
    The predicted orbital-period distribution of the subdwarf-B (sdB) population is bi-modal with a peak at short ( 250 days) periods. Observationally, many short-period sdB systems are known, but the predicted long period peak is missing as orbits have only been determined for a few long-period systems. As these predictions are based on poorly understood binary-interaction processes, it is of prime importance to confront the predictions with reliable observational data. We therefore initiated a monitoring program to find and characterize long-period sdB stars. In this paper we aim to determine the orbital parameters of the three long-period sdB+MS binaries BD+29 3070, BD+34 1543 and Feige 87, to constrain their absolute dimensions and the physical parameters of the components. High-resolution spectroscopic time series were obtained with HERMES at the Mercator telescope on La Palma, and analyzed to determine the radial velocities of both the sdB and MS components. Photometry from the literature was used to construct the spectral-energy distribution (SED) of the binaries. Atmosphere models were used to fit these SEDs and to determine the surface gravities and temperatures of both components of all systems. Spectral analysis was used to check the results of the SEDs. An orbital period of 1283 +- 63 d, a mass ratio of q = 0.39 +- 0.04 and a significant non-zero eccentricity of e = 0.15 +- 0.01 were found for BD+29 3070. For BD+34 1543 we determined P = 972 +- 2 d, q = 0.57 +- 0.01 and again a clear non-zero eccentricity of e = 0.16 +- 0.01. Last, for Feige 87 we found P = 936 +- 2 d, q = 0.55 +- 0.01 and e = 0.11 +- 0.01. BD+29 3070, BD+34 1543 and Feige 87 are long period sdB + MS binaries on clearly eccentric orbits. These results are in conflict with the predictions of stable Roche-lobe overflow models.Comment: 15 pages, 6 figures, Accepted by A&

    The population of hot subdwarf stars studied with Gaia I. The catalogue of known hot subdwarf stars

    Get PDF
    In preparation for the upcoming all-sky data releases of the Gaia mission we compiled a catalogue of known hot subdwarf stars and candidates drawn from the literature and yet unpublished databases. The catalogue contains 5613 unique sources and provides multi-band photometry from the ultraviolet to the far infrared, ground based proper motions, classifications based on spectroscopy and colours, published atmospheric parameters, radial velocities and light curve variability information. Using several different techniques we removed outliers and misclassified objects. By matching this catalogue with astrometric and photometric data from the Gaia mission, we will develop selection criteria to construct a homogeneous, magnitude-limited all-sky catalogue of hot subdwarf stars based on Gaia data.Comment: 11 pages, A&A accepte

    Impact of European Integration on the Functioning of the Insurance Market in Poland

    Get PDF
    The transformation process, that has begun 20 years ago, generated significant changes in the structure and organization of Polish economy. It stimulated development of particular market's segments, especially of the insurance sector. Poland's accession to the European Union required conformity to Its regulations, fulfillment of several conditions connected with the membership in the European Community. The purpose of this article is to present the main consequences of Poland's integration with EU in the field of insurance market. Joining the common market was an important challenge for this sector in our country.Rok 1990 stanowił początek procesu transformacji systemu społeczno - gospodarczego i ustrojowego. Ostatnie 20 lat to okres intensywnych przemian o charakterze strukturalnym i organizacyjnym, w wyniku których ukształtowały się warunki rozwoju poszczególnych segmentów systemu finansowego państwa, zwłaszcza sektora ubezpieczeń. Przystąpienie Polski do Unii Europejskiej wymagało wprowadzenia szeregu zmian, dostosowujących polski porządek prawny do uregulowań wspólnotowych regulujących funkcjonowanie rynku ubezpieczeń. Celem artykułu jest zaprezentowanie szans i zagrożeń, jakie wynikają dla tego segmentu gospodarki z przystąpienia Polski do UE. Niewątpliwie proces integracji stanowił poważne wyzwanie dla polskiego rynku ubezpieczeń
    corecore