Coarse wavelength division multiplexer on silicon-on-insulator for 100 GbE

A four-channel cascaded MZl based de-multiplexer at O-band with coarse channel spacing of 20 nm and band flatness of 13 nm is demonstrated on silicon-on-insulator. The device shows a mean crosstalk and insertion loss below -16 dB and 2.5 dB

Quantitative analysis of TM lateral leakage in foundry fabricated silicon Rib waveguides

We show that thin, shallow ridge, silicon-on-insulator waveguides exhibiting a lateral leakage behavior can be designed and fabricated using a standard silicon photonic foundry platform. We analyze the propagation loss through the observation of the transmitted TM polarized guided mode and TE polarized radiation and experimentally demonstrate that propagation losses as low as 0.087 dB/mm can be achieved. This demonstration will open a new frontier for practical devices exploiting a lateral leakage behavior with potential applications in the fields of biosensing and quantum optics among others

Optomechanical coupling in photonic crystal supported nanomechanical waveguides

We report enhanced optomechanical coupling by embedding a nano-mechanical beam resonator within an optical race-track resonator. Precise control of the mechanical resonator is achieved by clamping the beam between two low-loss photonic crystal waveguide couplers. The low insertion loss and the rigid mechanical support provided by the couplers yield both high mechanical and optical Q-factors for improved signal quality

Compact thermally tunable silicon racetrack modulators based on an asymmetric waveguide

A compact wavelength-tunable 10-Gb/s silicon racetrack modulator with integrated thermo-optic heater is demonstrated by using a waveguide with an asymmetric cross section, combining the compact footprint of microdisk modulators with the design simplicity of regular racetrack or ring modulators. The outer perimeter of the asymmetric racetrack modulator is fully etched to maximize optical confinement, and the inner waveguide edge is shallowly etched to maintain an electrically conductive path to the embedded p-n diode and to control the propagation of the asymmetric optical mode and its coupling to the bus waveguide. The resistive heating elements based on highly doped Si strips are implemented at the outer edge of the modulator for thermo-optic control. The asymmetric modulators can be fabricated along with Si wire waveguides and shallowly etched fiber-grating couplers using a simple process flow involving just two Si-patterning steps. Devices with a bending radius of 10 mu m and a novel "T"-shaped p-n diode layout have been fabricated, and exhibit electro-optic modulation and heater efficiencies of 28 pm/V and 42 pm/mW, respectively. At 10 Gb/s, a stable extinction ratio of 10 dB is demonstrated from a 2V(pp) drive swing, which can be maintained over a wavelength range of 4.6 nm by thermally tuning the modulator. This is equivalent with a temperature variation of about 62 degrees C

Monitoring and robust adaptive control of fed-batch cultures of microorganisms exhibiting overflow metabolism [abstract]

Overflow metabolism characterizes cells strains that are likely to produce inhibiting by-products resulting from an excess of substrate feeding and a saturated respiratory capacity. The critical substrate level separating the two different metabolic pathways is generally not well defined. Monitoring of this kind of cultures, going from model identification to state estimation, is first discussed. Then, a review of control techniques which all aim at maximizing the cell productivity of fed-batch fermentations is presented. Two main adaptive control strategies, one using an estimation of the critical substrate level as set-point and another regulating the by-product concentration, are proposed. Finally, experimental investigations of an adaptive RST control scheme using the observer polynomial for the regulation of the ethanol concentration in Saccharomyces cerevisiae fed-batch cultures ranging from laboratory to industrial scales, are also presented