38 research outputs found

    Results of thermomechanical treatment implementation in hammer drop forging industrial process

    Get PDF
    The study concerns cost-effective realization of Thermomechanical controlled processing (TMCP) in a forging process. The goal of the study was to produce mechanical properties of the steel in as-forged direct-cooled condition equivalent to those of quenched-tempered structural steel with simultaneous energy-savings benefits. The results of satisfactory implementation into hammer forging of a complex-geometry made of microalloyed medium-carbon steel 38MnVS6 in industrial conditions are presented. The use of finite element analysis for estimation of proper run of cooling curves and full-scale simulation for reproducible hot deformation and cooling conditions resulted in producing Rm over 1 120 MPa with elongation reaching 20 %

    Controlled austempering of hammer forgings aimed at pseudo normalized microstructure directly after deformation

    Get PDF
    The study concerns cost-effective realization of controlled thermomechanical processing (CTMP) of medium-carbon and HSLA steel aimed at producing microstructure and properties equivalent to normalized condition directly after forging. The results of theoretical and physical modeling of hot forging with subsequent heat treating adopted for industrial realization in continuous manner were verified in semi-industrial conditions of a forge plant

    Studies of the quality and cost-effectiveness of a novel concept of open-die forged powerplant main shaft

    Get PDF
    An innovatory concept of open-die forging of windmill main shaft is described. Comparative study of the new technology based on the concept of cogging hollow shaft on mandrel featuring material savings and higher quality of a finished part versus traditional production chain of this component is presented, indicating benefits and technological setbacks of industrial implementation. Results of industrial sampling aided with numerical simulation form guidelines for technological realization

    Combination gefitinib and methotrexate treatment for non-tubal ectopic pregnancies:a case series

    Get PDF
    Advanced Access publication on May 7, 2014Non-tubal ectopic pregnancies are a rare subgroup of ectopic pregnancies implanted at sites other than the Fallopian tube. Mortality from non-tubal ectopic pregnancies is higher compared with that for tubal ectopic pregnancies, and they are becoming more common, partly due to the rising incidence of Caesarean sections and use of assisted reproductive technologies. Non-tubal ectopic pregnancies can be especially difficult to treat. Surgical treatment is complex, and follow-up after medical treatment is usually protracted. There is therefore a need for more effective medical therapies to resolve non-tubal ectopic pregnancies and reduce operative intervention. We have recently reported successful use of combination gefitinib (an orally available epidermal growth factor receptor inhibitor) and methotrexate for treatment of tubal pregnancies. To our knowledge, this combination has not been used to treat non-tubal pregnancies. Here we report the use of combination gefitinib and methotrexate to treat eight women with stable, non-tubal ectopic pregnancies at two tertiary academic teaching hospitals (Edinburgh, UK and Melbourne, Australia); five interstitial and three Caesarean section scar ectopic pregnancies. Pretreatment serum hCG levels ranged from 2458 to 48 550 IU/l, and six women had pretreatment hCG levels >5000 IU/l. The women were co-administered 1-2 doses of i.m. methotrexate (50 mg/m² on Day 1, ± Day 4 or Day 7) with seven once daily doses of oral gefitinib (250 mg). The women were monitored until complete resolution of the ectopic pregnancy, defined as a serum hCG <15 IU/l. Time to resolution (days from first methotrexate dose until serum hCG <15 IU/l), safety and tolerability, complication rates and subsequent fertility outcomes were also recorded. All eight women were successfully treated with combination gefitinib and methotrexate. The most common side effects were transient acne/rash and diarrhoea, known side effects of gefitinib. All women promptly resumed menstruation and importantly, three women subsequently conceived spontaneously. Two have delivered a healthy infant at term and the third is currently in her second trimester of pregnancy. Hence, our case series supports a future clinical trial to determine the efficacy of combination gefitinib and methotrexate to treat non-tubal ectopic pregnancies.A.W. Horne, M.M. Skubisz, S. Tong, W.C. Duncan, P. Neil, E.M.Wallace, and T.G. John

    Relationship between anti-DFS70 autoantibodies and oxidative stress

    Get PDF
    Background: The anti-DFS70 autoantibodies are one of the most commonly and widely described agent of unknown clinical significance, frequently detected in healthy individuals. It is not known whether the DFS70 autoantibodies are protective or pathogenic. One of the factors suspected of inducing the formation of anti-DFS70 antibodies is increased oxidative stress. We evaluated the coexistence of anti-DFS70 antibodies with selected markers of oxidative stress and investigated whether these antibodies could be considered as indirect markers of oxidative stress. Methods: The intensity of oxidative stress was measured in all samples via indices of free-radical damage to lipids and proteins such as total oxidant status (TOS), concentrations of lipid hydroperoxides (LPH), lipofuscin (LPS), and malondialdehyde (MDA). The parameters of the non-enzymatic antioxidant system, such as total antioxidant status (TAS) and uric acid concentration (UA), were also measured, as well as the activity of superoxide dismutase (SOD). Based on TOS and TAS values, the oxidative stress index (OSI) was calculated. All samples were also tested with indirect immunofluorescence assay (IFA) and 357 samples were selected for direct monospecific anti DFS70 enzyme-linked immunosorbent assay (ELISA) testing. Results: The anti-DFS70 antibodies were confirmed by ELISA test in 21.29% of samples. Compared with anti-DFS70 negative samples we observed 23% lower concentration of LPH (P =.038) and 11% lower concentration of UA (P =.005). TOS was 20% lower (P =.014). The activity of SOD was up to 5% higher (P =.037). The Pearson correlation showed weak negative correlation for LPH, UA, and TOS and a weak positive correlation for SOD activity. Conclusion: In samples positive for the anti-DFS70 antibody a decreased level of oxidative stress was observed, especially in the case of samples with a high antibody titer. Anti-DFS70 antibodies can be considered as an indirect marker of reduced oxidative stress or a marker indicating the recent intensification of antioxidant processes. © The Author(s) 2022. **Please note that there are multiple authors for this article therefore only the name of the first 30 including Federation University Australia affiliate “Fadi Charchar” is provided in this record*

    Analysis of the impact of sex and age on the variation in the prevalence of antinuclear autoantibodies in Polish population : a nationwide observational, cross-sectional study

    Get PDF
    The detection of antinuclear autoantibody (ANA) is dependent on many factors and varies between the populations. The aim of the study was first to assess the prevalence of ANA in the Polish adult population depending on age, sex and the cutoff threshold used for the results obtained. Second, we estimated the occurrence of individual types of ANA-staining patterns. We tested 1731 patient samples using commercially available IIFA using two cutoff thresholds of 1:100 and 1:160. We found ANA in 260 participants (15.0%), but the percentage of positive results strongly depended on the cutoff level. For a cutoff threshold 1:100, the positive population was 19.5% and for the 1:160 cutoff threshold, it was 11.7%. The most prevalent ANA-staining pattern was AC-2 Dense Fine speckled (50%), followed by AC-21 Reticular/AMA (14.38%) ANA more common in women (72%); 64% of ANA-positive patients were over 50 years of age. ANA prevalence in the Polish population is at a level observed in other highly developed countries and is more prevalent in women and elderly individuals. To reduce the number of positive results released, we suggest that Polish laboratories should set 1:160 as the cutoff threshold. © 2021, The Author(s). **Please note that there are multiple authors for this article therefore only the name of the first 30 including Federation University Australia affiliate “Fadi Charchar" is provided in this record*

    Ectopic pregnancy secondary to in vitro fertilisation-embryo transfer: pathogenic mechanisms and management strategies

    Get PDF

    Analysis of the impact of sex and age on the variation in the prevalence of antinuclear autoantibodies in Polish population: a nationwide observational, cross-sectional study

    Get PDF
    The detection of antinuclear autoantibody (ANA) is dependent on many factors and varies between the populations. The aim of the study was first to assess the prevalence of ANA in the Polish adult population depending on age, sex and the cutoff threshold used for the results obtained. Second, we estimated the occurrence of individual types of ANA-staining patterns. We tested 1731 patient samples using commercially available IIFA using two cutoff thresholds of 1:100 and 1:160. We found ANA in 260 participants (15.0%), but the percentage of positive results strongly depended on the cutoff level. For a cutoff threshold 1:100, the positive population was 19.5% and for the 1:160 cutoff threshold, it was 11.7%. The most prevalent ANA-staining pattern was AC-2 Dense Fine speckled (50%), followed by AC-21 Reticular/AMA (14.38%) ANA more common in women (72%); 64% of ANA-positive patients were over 50 years of age. ANA prevalence in the Polish population is at a level observed in other highly developed countries and is more prevalent in women and elderly individuals. To reduce the number of positive results released, we suggest that Polish laboratories should set 1:160 as the cutoff threshold
    corecore