Automated control system for a mashing process

The goal of this paper is to describe a system for a mashing process, which is the first part of brewing beer. The mashing is a procedure where the fermentable (and some non-fermentable) sugars are extracted from malts. The program part based on LabVIEW, which is used to control NI CompactRIO. The main target of the project is to reach a predefined levels of the temperatures and maintain it during the pauses. When the necessary break time is ended the system is ready to go to the new value. The precise control of the temperatures during the breaks is one of the critical factors that define the texture and alcohol content of the beer. The system has two tanks with resistors PT100 in both of them, heat exchanger (coil), heater and pump. The first tank has heating element in order to rise the temperature in the other one. This project has practical solution with all explanations and graphs which are proven working ability of this control system

CPVMatch - Concentrating photovoltaic modules using advanced technologies and cells for highest efficiencies

This paper presents the project Concentrating Photovoltaic modules using advanced technologies and cells for highest efficiencies (CPVMatch), which is funded from the European Union’s Horizon 2020 research and innovation programme. V multi-junction solar cells and CPV modules. Concerning cells, novel wafer bonded four-junction solar cells made of GaInP/GaAs//GaInAs/Ge are optimized with the target of reaching 48% efficiency under concentration at the end of the project. Moreover, multi-junction solar cell technologies with advanced materials - like ternary IV element mixtures (i.e. SiGeSn) and nanostructured anti-reflective coatings - are investigated. Concerning CPV modules the project focuses on both Fresnel-based and mirror-based technologies with a target efficiency of 40% under high concentrations beyond 800x. Achromatic Fresnel lenses for improved light management without secondary optics are investigated. In addition, smart, mirror-based HCPV modules are developed, which include a new mirror-based design, the integration of high efficiency, low cost DC/DC converters and an intelligent tracking sensor (PSD sensor) at module level. A profound life-cycle and environmental assessment and the development of adapted characterization methods of new multi-junction cells and HCPV modules complete the work plan of CPVMatch

Study of porous monolithic sio2 prepeared by sol-gel method

For applications as catalyst supports in flow reactors, porous silica monoliths require a combination of connected pores of micron-scale and nm-scale pores. We have synthesised a range porous silica monoliths, characterised their nm-scale pores and measured their permeability coefficients k. It can be controlled by adjustment of the polymer/silane concentration ratio, whilst maintaining the specific surface area and nm-scale porosity approximately constant

Алгоритм выбора точки интерконнекции распределенной генерации и ее интеграция в работу энергосистемы

В статье представлен алгоритм выбора точки интерконнекции распределенной генерации с учетом поставленных критериев. Рассмотрены основные факторы, влияющие на режимы работы энергосистемы в зависимости от точки интерконнекции источников распределенной генерации