91 research outputs found
Recommended from our members
Secondary flows and extra heat transfer enhancement of ribbed surfaces with jet impingement
Previous experiments recognize that substantial heat transfer augmentation is achieved by adding ribbed turbulators after jet impingement with cross flow present. To address fundamental working mechanisms, conjugate CFD simulations are employed for ribs, jet impingement, and their combinations. Flow characteristics and drawbacks for the individual and combined enhancement techniques are highlighted. New analysis on the coupled design arrangement reveals that the counter-rotating vortices generated by the jet flow can energize inter-rib recirculating vortices and promote span-wise convection. With an optimal design combination arrangement, extra heat transfer benefit is achieved beyond that associated with simple superposition of rib and jet impingement techniques
Permeability correction factor for fractures with permeable walls
Enhanced Geothermal Systems (EGS) are based on the premise that heat can be extracted from hot dry rocks located at significant depths by circulating fluid through fracture networks in the system. Heated fluid is recovered through production wells and the energy is extracted in a heat exchange chamber. There is much published research on flow through fractures, and many models have been developed to describe an effective permeability of a fracture or a fracture network. In these cases however, the walls of the fracture were modelled as being impermeable. In this paper, we have extended our previous work on fractures with permeable walls, and we introduce a correction factor to the equation that governs fracture permeability. The solution shows that the effective fracture permeability for fractures with permeable walls depends not only on the height of the channel, but also on the wall permeability and the wall Reynolds number of the fluid. We show that our solution reduces to the established solution when the fracture walls become impermeable. We also extend the discussion to cover the effective permeability of a system of fractures with permeable walls.R. Mohais, C. Xu, P. A. Dowd, and M. Han
Subminiature hot-wire sensor construction
The detailed procedure for constructing subminiature hot-wire sensors is given. The wire used is 0.625 micrometers diameter, 90 per cent platinum/10 per cent rhodium, plated with 30-40 micrometers diameter of silver. For construction, the plated wire is first bent into the appropriate shape, and then soldered onto stainless steel prongs. Portions of the silver are then etched, removing it entirely from a 200 mm-400 mm length of platinum/rhodium wire. Small portions of copper plating are then added to give the disired platinum/rhodium wire sensing length, and to insure that good mechanical and electrical connections exist to the sensor. With this procedure, subminiature hot wire sensors have been constructed which operatewith minimal drift, and are mechanically robust for long periods of time. The sensors have been demonstrated to be a useful research tool for turbulence research because they provide a more accurate means to measure energy levels of small-scale turbulent motions than is possible with other measurement devicessupported by the Science and Engineering
Research Council of Great Britain and by the Office of Naval Research
(Grant N0001 4-84-G-01 1 7) , and was carried out in the Department of Aeronautics
of the Imperial College of Science and Technology, University of Londonhttp://archive.org/details/subminiaturehotw00lig
The thermal behavior of film cooled turbulent boundary layers as affected by longitudinal vortices.
http://archive.org/details/thermalbehavioro00ort
- …