Щоденники експедиційної роботи Григорія Дем'яна (Вступна стаття та підготовка текстів Василя Сокола)

The interaction between S(-II) and ferric oxides exerts a major control for the sulphur and iron cycle and in particular for the carbon and electron flow in many aquatic systems. It is regarded to be a key reaction leading ultimately to pyrite formation, the pathways still remaining unresolved. We have studied the reaction between lepidocrocite (γ-FeOOH, 21–42 mmol L−1) and dissolved S(-II) (3–9 mmol L−1) in batch experiments at pH 7 in a glove box using TEM, XRD, Mössbauer spectroscopy, and wet chemistry extraction to explore the nanocrystalline products forming at different time steps in close contact to the lepidocrocitesurface. S(0) and acid extractable Fe(II) (Fe(II)HCl) were the main products detected by wet chemistry extraction. The reaction could be divided into three steps: a rapid (<15 min) consumption of dissolved S(-II), formationof S(0) and the build-up of an Fe(II)HCl pool. Then in the absence of dissolved S(-II) concentrations of S(0) and Fe(II)HCl increased only slightly. TEM measurements revealed the occurrence of a mackinawite rim covering the lepidocrocite crystals and being separated from the lepidocrocitesurface by an interfacial magnetite layer that can be regarded as a steady state product of the interaction between lepidocrocite and mackinawite. A significant fraction of Fe(II) was formed in excess to FeS within the first 2 h. The amount of this fraction increased with decreasing ratio between dissolved S(-II) concentration and the concentration ofsurface sites, which we attributed to a kinetic decoupling of S(-II) oxidation and Fe(II) detachment from the lepidocrocitesurface. At low ratios, S(-II) seems to transfer electrons to lepidocrocite faster then stoichiometric amounts of FeS could. After 2 days Fe(II)HCl and S(0) started to decrease resulting in pyrite formation accompanied by traces of magnetite. TEM measurements indicated that mackinawite completely dissolved and precipitation of pyrite occurred dislocated from the lepidocrocitesurface. The absence of dissolved sulphide under these conditions suggest that excess Fe(II) is involved in the formationof polysulphides which are key precursors during pyrite formation. We propose that the occurrence of excess Fe(II) is a common phenomenon particularly in low sulphide – high iron environments attributing significant reactivity to ferric (hydr)oxide

Kinetics of Fe(II)-Catalyzed Transformation of 6-line Ferrihydrite under Anaerobic Flow Conditions

The readsorption of ferrous ions produced by the abiotic and microbially-mediated reductive dissolution of iron oxy-hydroxides drives a series of transformations of the host minerals. To further understand the mechanisms by which these transformations occur and their kinetics within a microporous flow environment, flow-through experiments were conducted in which capillary tubes packed with ferrihydrite-coated glass spheres were injected with inorganic Fe(II) solutions under circumneutral pH conditions at 25 C. Synchrotron X-ray diffraction was used to identify the secondary phase(s) formed and to provide data for quantitative kinetic analysis. At concentrations at and above 1.8 mM Fe(II) in the injection solution, magnetite was the only secondary phase formed (no intermediates were detected), with complete transformation following a nonlinear rate law requiring 28 hours and 150 hours of reaction at 18 and 1.8 mM Fe(II), respectively. However, when the injection solution consisted of 0.36 mM Fe(II), goethite was the predominant reaction product and formed much more slowly according to a linear rate law, while only minor magnetite was formed. When the rates are normalized based on the time to react half of the ferrihydrite on a reduced time plot, it is apparent that the 1.8 mM and 18 mM input Fe(II) experiments can be described by the same reaction mechanism, while the 0.36 input Fe(II) experiment is distinct. The analysis of the transformation kinetics suggest that the transformations involved an electron transfer reaction between the aqueous as well as sorbed Fe(II) and ferrihydrite acting as a semiconductor, rather than a simple dissolution and recrystallization mechanism. A transformation mechanism involving sorbed inner sphere Fe(II) alone is not supported, since the essentially equal coverage of sorption sites in the 18 mM and 1.8 mM Fe(II) injections cannot explain the difference in the transformation rates observed

Inhibition of various gram-positive and gram-negative bacteria growth on selenium nanoparticle coated paper towels

Qi Wang,1 Philip Larese-Casanova,2 Thomas J Webster3,41Department of Bioengineering, College of Engineering, Northeastern University, Boston, MA, USA; 2Department of Civil and Environmental Engineering, College of Engineering, Northeastern University, Boston, MA, USA; 3Department of Chemical Engineering, College of Engineering, Northeastern University, Boston, MA, USA; 4Center of Excellence for Advanced Materials Research, King Abdulaziz University, Jeddah, Saudi ArabiaAbstract: There are wide spread bacterial contamination issues on various paper products, such as paper towels hanging in sink splash zones or those used to clean surfaces, filter papers used in water and air purifying systems, and wrappings used in the food industry; such contamination may lead to the potential spread of bacteria and consequent severe health concerns. In this study, selenium nanoparticles were coated on normal paper towel surfaces through a quick precipitation method, introducing antibacterial properties to the paper towels in a healthy way. Their effectiveness at preventing biofilm formation was tested in bacterial assays involving Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, and Staphylococcus epidermidis. The results showed significant and continuous bacteria inhibition with about a 90% reduction from 24 to 72 hours for gram-positive bacteria including S. aureus and S. epidermidis. The selenium coated paper towels also showed significant inhibition of gram-negative bacteria like P. aeruginosa and E. coli growth at about 57% and 84%, respectively, after 72 hours of treatment. Therefore, this study established a promising selenium-based antibacterial strategy to prevent bacterial growth on paper products, which may lead to the avoidance of bacteria spreading and consequent severe health concerns.Keywords: selenium nanoparticles, paper towels, antibacteria

Oxygen Isotope Indicators of Selenate Reaction with Fe(II) and Fe(III) Hydroxides

Selenate (SeO₄^2‑) reduction to elemental selenium is an important Se immobilization process in subsurface environments that could be mediated by Fe­(II)-rich minerals or selenate-respiring microorganisms. We report the kinetic isotope effects for ¹⁸O within selenate during abiotic reactions with iron-bearing hydroxides within laboratory experiments. Selenate was reduced to Se(0) by a green rust (chloride interlayer type) and ferrous hydroxide, the two known environmentally relevant mineral reductants for selenate. Reaction kinetics are described by a rapid, low-fractionating uptake step caused by diffusive exchange between selenate and chloride followed by a slower, high-fractionating reduction step caused by electron transfer from structural Fe­(II). The dual-phase kinetics cannot be described with the traditional Rayleigh fractionation model; however, well after the initial uptake step, the extent of selenate reaction is well correlated with δ¹⁸O values in accordance with the Rayleigh model. Selenate-¹⁸O enrichment (ε_O) was nearly identical for reaction with chloride green rust (22.7 ± 2.2‰) and ferrous hydroxide (22.1 ± 1.1‰) which suggests a common reduction mechanism by structural Fe­(II). The minor enrichment due to anion exchange alone (1.4 ± 0.2‰) was confirmed using iowaite, a nonredox active Mg­(II)–Fe­(III) layered double hydroxide. Our ε_O results may contribute to Se isotope forensics to identify selenate reduction within field sites and to possibly distinguish between abiotic and biotic reduction processes

Inhibition of E. coli and S. aureus with selenium nanoparticles synthesized by pulsed laser ablation in deionized water

G Guisbiers,1 Q Wang,2 E Khachatryan,1 LC Mimun,1 R Mendoza-Cruz,1 P Larese-Casanova,3 TJ Webster,2,4,5 KL Nash1 1Department of Physics and Astronomy, The University of Texas at San Antonio, San Antonio, TX, 2Department of Bioengineering, 3Department of Civil and Environmental Engineering, 4Department of Chemical Engineering, Northeastern University, Boston, MA, USA; 5Center of Excellence for Advanced Materials Research, King Abdulaziz University, Jeddah, Saudi Arabia Abstract: Nosocomial diseases are mainly caused by two common pathogens, Escherichia coli and Staphylococcus aureus, which are becoming more and more resistant to conventional antibiotics. Therefore, it is becoming increasingly necessary to find other alternative treatments than commonly utilized drugs. A promising strategy is to use nanomaterials such as selenium nanoparticles. However, the ability to produce nanoparticles free of any contamination is very challenging, especially for nano-medical applications. This paper reports the successful synthesis of pure selenium nanoparticles by laser ablation in water and determines the minimal concentration required for ~50% inhibition of either E. coli or S. aureus after 24 hours to be at least ~50 ppm. Total inhibition of E. coli and S. aureus is expected to occur at 107&plusmn;12 and 79&plusmn;4 ppm, respectively. In this manner, this study reports for the first time an easy synthesis process for creating pure selenium to inhibit bacterial growth. Keywords: nosocomial disease, bacteria, antibiotics resistant, cytotoxicit