640 research outputs found

    Giant optical birefringence of semiconductor nanowire metamaterials

    Get PDF
    Semiconductor nanowires exhibit large polarization anisotropy for the absorption and emission of light, making them ideal building blocks for novel photonic metamaterials. Here, we demonstrate that a high density of aligned nanowires exhibits giant optical birefringence, a collective phenomenon observable uniquely for collections of wires. The nanowire material was grown on gallium phosphide (GaP) (111) in the form of vertically standing GaP nanowires. We obtain the largest optical birefringence to date, with a difference between the in-plane and out-of-plane refractive indices of 0.80 and a relative birefringence of 43%. These values exceed by a factor of 75 the natural birefringence of quartz and a by more than a factor of two the highest values reported so far in other artificial materials. By exploiting the specific crystallographic growth directions of the nanowires on the substrate, we further demonstrate full control over the orientation of the optical birefringence effect in the metamaterial.Comment: 10 pages, 4 figure

    Recent deformation at Campi Flegrei caldera (Italy) detected by DinSar and leveling techniques

    Get PDF
    The Campi Flegrei caldera, a volcanic and densely populated area located to the west of Napoli (Italy), was characterized by rapid ground deformation during 1970-72 and 1982-84, for a total amount of 3.5 m in the city of Pozzuoli. Since 1985 a slow deflation was active, with episodic microcrises of uplifts. A new and consistent uplift event is now going on, beginning in November 2004, as revealed by spatial and terrestrial geodetic techniques. In particular, we adopt almost all the available ENVISAT ASAR data acquired from both ascending and descending orbits during 2002-2006, to generate mean deformation velocity maps and time series with spatial resolution of about 100 m. The maps are computed following the Small BAseline Subset (SBAS) approach (Berardino et al., 2002), that implements an appropriate combination of differential interferograms generated from SAR data pairs (60 SAR images for this work). In addition to satellite observations, we show data from the high precision levelling network of the INGV-Osservatorio Vesuviano, consisting in about 320 benchmarks. Levelling measurements are regularly carried out on both the whole network and along the coast line; in case of a bradyseismic crisis, the temporal sampling is strongly increased. Both DInSAR and levelling data evidence the maximum value of the vertical displacement near the city of Pozzuoli. We model the observed deformation by means of 3D pressurized point-source and extended source, performing inversions to constrain their shape and location. The resulting sources are also compared with that inverted for the 1982-84 unrest.UnpublishedWienope

    Recent deformation at Campi Flegrei caldera (Italy) detected by DinSar and leveling techniques

    Get PDF
    The Campi Flegrei caldera, a volcanic and densely populated area located to the west of Napoli (Italy), was characterized by rapid ground deformation during 1970-72 and 1982-84, for a total amount of 3.5 m in the city of Pozzuoli. Since 1985 a slow deflation was active, with episodic microcrises of uplifts. A new and consistent uplift event is now going on, beginning in November 2004, as revealed by spatial and terrestrial geodetic techniques. In particular, we adopt almost all the available ENVISAT ASAR data acquired from both ascending and descending orbits during 2002-2006, to generate mean deformation velocity maps and time series with spatial resolution of about 100 m. The maps are computed following the Small BAseline Subset (SBAS) approach (Berardino et al., 2002), that implements an appropriate combination of differential interferograms generated from SAR data pairs (60 SAR images for this work). In addition to satellite observations, we show data from the high precision levelling network of the INGV-Osservatorio Vesuviano, consisting in about 320 benchmarks. Levelling measurements are regularly carried out on both the whole network and along the coast line; in case of a bradyseismic crisis, the temporal sampling is strongly increased. Both DInSAR and levelling data evidence the maximum value of the vertical displacement near the city of Pozzuoli. We model the observed deformation by means of 3D pressurized point-source and extended source, performing inversions to constrain their shape and location. The resulting sources are also compared with that inverted for the 1982-84 unrest

    Single quantum dot nanowire LEDs

    Full text link
    We report reproducible fabrication of InP-InAsP nanowire light emitting diodes in which electron-hole recombination is restricted to a quantum-dot-sized InAsP section. The nanowire geometry naturally self-aligns the quantum dot with the n-InP and p-InP ends of the wire, making these devices promising candidates for electrically-driven quantum optics experiments. We have investigated the operation of these nano-LEDs with a consistent series of experiments at room temperature and at 10 K, demonstrating the potential of this system for single photon applications

    The Grizzly, September 17, 1982

    Get PDF
    New Ursinus Students Welcomed • Lantern Needs Associate Editor • Vandalism at Myrin • Administration Alterations • Committee Needs Chairmen • Folk Festival Summer Fun • Forum Preview • Lewis on Wall Street • Fencing Anyone? • Sendai Students at UC • Changes in Wismer • USGA Notes • Field Hockey Falls to Trenton State • The Bear Pack is in Top Form, Again • Volleyball Dumps Del Val • Grizzlies Drop Football Opener • Soccer Team Loses Two Close Oneshttps://digitalcommons.ursinus.edu/grizzlynews/1081/thumbnail.jp

    Potential of a cyclone prototype spacer to improve in vitro dry powder delivery

    Get PDF
    Copyright The Author(s) 2013. This article is published with open access at Springerlink.com. This article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are creditedPurpose: Low inspiratory force in patients with lung disease is associated with poor deagglomeration and high throat deposition when using dry powder inhalers (DPIs). The potential of two reverse flow cyclone prototypes as spacers for commercial carrierbased DPIs was investigated. Methods: Cyclohaler®, Accuhaler® and Easyhaler® were tested with and without the spacers between 30-60 Lmin-1. Deposition of particles in the next generation impactor and within the devices was determined by high performance liquid chromatography. Results: Reduced induction port deposition of the emitted particles from the cyclones was observed due to the high retention of the drug within the spacers (e.g. salbutamol sulphate (SS): 67.89 ± 6.51 % at 30 Lmin-1 in Cheng 1). Fine particle fractions of aerosol as emitted from the cyclones were substantially higher than the DPIs alone. Moreover, the aerodynamic diameters of particles emitted from the cyclones were halved compared to the DPIs alone (e.g. SS from the Cyclohaler® at 4 kPa: 1.08 ± 0.05 μm vs. 3.00 ± 0.12 μm, with and without Cheng 2, respectively) and unaltered with increased flow rates. Conclusion: This work has shown the potential of employing a cyclone spacer for commercial carrier-based DPIs to improve inhaled drug delivery.Peer reviewe

    Bragg coherent x-ray diffractive imaging of a single indium phosphide nanowire

    Get PDF
    Three-dimensional (3D) Bragg coherent x-ray diffractive imaging (CXDI) with a nanofocused beam was applied to quantitatively map the internal strain field of a single indium phosphide nanowire. The quantitative values of the strain were obtained by pre-characterization of the beam profile with transmission ptychography on a test sample. Our measurements revealed the 3D strain distribution in a region of 150 nm below the catalyst Au particle. We observed a slight gradient of the strain in the range of ±0.6% along the [111] growth direction of the nanowire. We also determined the spatial resolution in our measurements to be about 10 nm in the direction perpendicular to the facets of the nanowire. The CXDI measurements were compared with the finite element method simulations and show a good agreement with our experimental results. The proposed approach can become an effective tool for in operando studies of the nanowires
    • …
    corecore