3,230 research outputs found
Carbon and energy performance of housing : a model and toolset for policy development applied to a local authority housing stock
The area of strategy formulation for energy and carbon performance of housing is coming under increasing focus. A model has been developed based on simulation results aligned with knowledge of the housing stock which can be used to calculate energy, carbon and cost results from a reduced number of input parameters. The context of the model can be varied to reflect different climates and patterns of use. The model is embedded in a user friendly java tool which can be used to give results for a dwelling or the housing stock of an organisation, region or country. It is possible to investigate the effect of housing upgrade options, future building regulations, climates, patterns of use, renewable energy systems etc. and support formulation of future policy. In this paper the tool is briefly described and an example given showing its application to a local authority rented housing stock
Evaluation of PV technology implementation in the building sector
This paper presents a simulation case that shows the impact on energy consumption of a building applying photovoltaic shading systems. In order to make photovoltaic application more economical, the effect of a photovoltaic facade as a passive cooling system can result in a considerable energy cost reduction, with positive influence on the payback time of the photovoltaic installation. Photovoltaic shading systems can be applied to both refurbishment of old buildings and to new-build, offering attractive and environmentally integrated architectural solutions
Introducing instrumentation and data acquisition to mechanical engineering students using LabVIEW
For several years, LabVIEW has been used within the Department of Mechanical Engineering at the University of Strathclyde as the basis for introducing the basic concepts and practice of data acquisition, and more generally, instrumentation, to postgraduate engineering students and undergraduate project students. The objectives of introducing LabVIEW within the curriculum were to expose students to instrumentation and experimental analysis, and to create courseware that could be used flexibly for a range of students. It was also important that staff time for laboratory work be kept to manageable levels. A course module was developed which allows engineering students with very little or no previous knowledge of instrumentation or programming to become acquainted with the basics of programming, experimentation and data acquisition. The basic course structure has been used to teach both undergraduates and postgraduates as well as laboratory technical staff. The paper describes the objectives of the use of LabVIEW for teaching, the structure of the module developed, and the response of students who have been subjected to the course, and how it is intended to expand the delivery to greater student numbers
Recommended from our members
Making hurricane track data accessible
Our interactive tool allows the exploration, validation and presentation of hundreds of years of dynamically simulated storm tracks. The tracks were generated as part of a research project to improve the risk assessment of tropical storm damage by the insurance industry. The main impact of the tool is that exploratory interactive visualisation is now being used by the storm track modellers to (a) validate and improve model outputs, (b) discuss outputs with their peers (c) obtain a better understanding of the formation and development of tropical storms and (d) present examples of the behaviour of storms under different conditions to the insurance industry and others. Insights into tropical storm behaviour have been obtained and these insights are being articulated
The role of built environment energy efficiency in a sustainable UK energy economy
Energy efficiency in the built environment can make significant contributions to a sustainable energy economy. In order to achieve this, greater public awareness of the importance of energy efficiency is required. In the short term, new efficient domestic appliances, building technologies, legislation quantifying building plant performance, and improved building regulations to include installed plant will be required. Continuing these improvements in the longer term is likely to see the adoption of small-scale renewable technologies embedded in the building fabric. Internet-based energy services will see low-cost building energy management and control delivered to the mass market in order that plant can be operated and maintained at optimum performance levels and energy savings quantified. There are many technology options for improved energy performance of the building fabric and energy systems and it's not yet clear which will prove to be the most economic. Therefore, flexibility is needed in legislation and energy-efficiency initiatives
Recommended from our members
Designing Interactive Graphics for Validating and Interpreting Storm Track Model Outputs
We report on some initial work in which we designed interactive graphics to help climate scientists identify and extract good examples of simulated storm-tracks from a large dataset to help disseminate information to various audiences. A side-effect of this work was that the exploratory potential offered by the interactive graphics helped our climate scientist coauthors validate and interpret their data in a way that was not previously possible for them. We are extending this work to provide support for a wider range of validation and interpretative tasks, with a focus on answering questions of relevance to the insurance industry. We describe our collaborative approach, that draws on ideas from ’patchwork prototyping’ [2, 5] in which a rapid iterative process of design, implementation and testing, is used to help provide the functionality to support a set of ‘user stories’
The evolution of plasma parameters on a coronal source surface at 2.3 Rs during solar minimum
We analyze data from the Solar and Heliospheric Observatory to produce global
maps of coronal outflow velocities and densities in the regions where the solar
wind is undergoing acceleration. The maps use UV and white light coronal data
obtained from the Ultraviolet Coronagraph Spectrometer and the Large Angle
Spectroscopic Coronagraph, respectively, and a Doppler dimming analysis to
determine the mean outflow velocities. The outflow velocities are defined on a
sphere at 2.3 Rs from Sun-center and are organized by Carrington Rotations
during the solar minimum period at the start of solar cycle 23. We use the
outflow velocity and density maps to show that while the solar minimum corona
is relatively stable during its early stages, the shrinkage of the north polar
hole in the later stages leads to changes in both the global areal expansion of
the coronal hole and the derived internal flux tube expansion factors of the
solar wind. The polar hole areal expansion factor and the flux tube expansion
factors (between the coronal base and 2.3 Rs) start out as super-radial but
then they become more nearly radial as the corona progresses away from solar
minimum. The results also support the idea that the largest flux tube expansion
factors are located near the coronal hole/streamer interface, at least during
the deepest part of the solar minimum period.Comment: 12 Figures, Accepted for publication in Ap
Non equilibrium effects in fragmentation
We study, using molecular dynamics techniques, how boundary conditions affect
the process of fragmentation of finite, highly excited, Lennard-Jones systems.
We analyze the behavior of the caloric curves (CC), the associated thermal
response functions (TRF) and cluster mass distributions for constrained and
unconstrained hot drops. It is shown that the resulting CC's for the
constrained case differ from the one in the unconstrained case, mainly in the
presence of a ``vapor branch''. This branch is absent in the free expanding
case even at high energies . This effect is traced to the role played by the
collective expansion motion. On the other hand, we found that the recently
proposed characteristic features of a first order phase transition taking place
in a finite isolated system, i.e. abnormally large kinetic energy fluctuations
and a negative branch in the TRF, are present for the constrained (dilute) as
well the unconstrained case. The microscopic origin of this behavior is also
analyzed.Comment: 21 pages, 11 figure
The dispersive self-dual Einstein equations and the Toda lattice
The Boyer-Finley equation, or -Toda equation is both a reduction
of the self-dual Einstein equations and the dispersionlesslimit of the
-Toda lattice equation. This suggests that there should be a dispersive
version of the self-dual Einstein equation which both contains the Toda lattice
equation and whose dispersionless limit is the familiar self-dual Einstein
equation. Such a system is studied in this paper. The results are achieved by
using a deformation, based on an associative -product, of the algebra
used in the study of the undeformed, or dispersionless,
equations.Comment: 11 pages, LaTeX. To appear: J. Phys.
Potential energy savings achievable by zoned control of individual rooms in UK housing compared to standard central heating controls
Energy is wasted in domestic buildings when rooms that are heated are not occupied. Allowing those rooms to cool reduces the inside – outside temperature difference and therefore rate of heat loss, resulting in an energy saving. This suggests a cost effective way to upgrade an existing modern heating system, especially in older properties where other energy saving possibilities are limited. Assessing the savings achievable requires an analysis of a range of influencing factors, such as house type and age, location and occupancy patterns. Door opening has a major influence due to the impact on air exchange between heated and unheated zones in a house, so this was also considered. Annual simulations were carried out on dynamic models of the thermal and air flow interactions, for all combinations of influencing factors, to compare the potential energy savings of zoned versus non-zoned control. Savings of between 12% and 31% were obtained in the case of a semi-detached house model, and between 8% and 37% for a single storey bungalow. The largest percentage savings occurred in older properties, with interconnecting doors kept closed, and for the more intermittent types of occupancy. The average saving obtained for both house types was around 20%
- …