Foliar Application of Several Nitrogen Sources as Fertilisers to Tempranillo Grapevines: Effect on Wine Volatile Composition

Foliar nitrogen applications to the vineyard make it possible to improve grape and wine phenolic and amino acid concentration. However, to our knowledge, there is little information about their impacts on the volatile composition of wine. Therefore, the aim of this work was to evaluate the effects of the application of several nitrogen sources in Tempranillo vineyards on wine volatile composition during the first season. Subsequently, two dosages of phenylalanine and urea were applied to the vineyard with the aim of evaluating their effect on wine volatile composition. The results show that the different nitrogen sources applied to the grapevines during the first season did not affect higher alcohols, fatty acids, esters and other volatile compounds in the wines. The two dosages of phenylalanine and urea applied to the vineyard during the second vintage barely affected wine volatile composition. Consequently, this study shows that foliar nitrogen treatments in vineyards did not modify the wine aromatic profile

Análisis sobre la influencia de la densidad en la termografía de infrarrojos y el alcance de esta técnica en la detección de defectos internos en la madera

This paper shows the results of a laboratory phase for the determination of the 1limits of infrared thermography in detecting internal defects in wood and, furthermore, it analyses how the density of this material can influence the surface temperature displayed in a thermogram. To this end, experimental work is carried out whereby a series of work and environmental parameters are monitored (such as environmental temperature, relative humidity, distance to target), and the process is systematized by using pieces of different wood species (different densities) and by devising a set of samples for which various possible cases are analysed in terms of size and internal position of the damage. Similarly, using these samples, a study has been conducted on the effect on the thermal image produced by an increase of humidity inside the defect phenomena normally associated with wood decay.En el presente artículo se muestran los resultados obtenidos en una fase de laboratorio al tratar de determinar el alcance de la termografía de infrarrojos en la detección de defectos internos en la madera y, por otro lado, cómo interviene la densidad de este material sobre la temperatura superficial mostrada en un termograma. Para ello se ha desarrollado un trabajo experimental donde se han controlado una serie de parámetros ambientales y de trabajo (temperatura ambiente, humedad relativa, distancia al objetivo…), y se ha sistematizado el proceso utilizando piezas de distintas especies de madera (distintas densidades) y diseñando una serie de probetas donde se han analizado varias casuísticas posibles en cuanto a tamaño y posición interna de los daños. Análogamente, sobre estas probetas se ha estudiado el efecto que produce sobre la imagen termográfica un incremento de humedad interna en el defecto asociada normalmente a los fenómenos de pudrición de la madera

Local adsorption structure and bonding of porphine on Cu(111) before and after self-metalation

We have experimentally determined the lateral registry and geometric structure of free-base porphine (2H-P) and copper-metalated porphine (Cu-P) adsorbed on Cu(111), by means of energy-scanned photoelectron diffraction (PhD), and compared the experimental results to density functional theory (DFT) calculations that included van der Waals corrections within the Tkatchenko-Scheffler approach. Both 2H-P and Cu-P adsorb with their center above a surface bridge site. Consistency is obtained between the experimental and DFT-predicted structural models, with a characteristic change in the corrugation of the four N atoms of the molecule's macrocycle following metalation. Interestingly, comparison with previously published data for cobalt porphine adsorbed on the same surface evidences a distinct increase in the average height of the N atoms above the surface through the series 2H-P, Cu-P, cobalt porphine. Such an increase strikingly anti-correlates the DFT-predicted adsorption strength, with 2H-P having the smallest adsorption height despite the weakest calculated adsorption energy. In addition, our findings suggest that for these macrocyclic compounds, substrate-to-molecule charge transfer and adsorption strength may not be univocally correlated

Caracterización de morteros con cerámica reciclada y su uso en piezas prefabicadas para entrevigado de forjados

This study analyses a procedure to manufacture mortars with different percentages of ceramic waste as partial replacement for aggregates. The study also examines the physical, chemical and mechanical properties of the new mortars, analysing substitution ratios that range from 10% to 50%. Prior to this, all the materials used in the production of the mortar were characterised using X-ray diffraction (XRD) and fluorescence (XRF). The objective was to determine the similarity between different types of ceramic waste, as well as the differences in the minerology and chemical composition with the aggregate. The results of the study show that it is possible to obtain mortars with lower densities compared to the same product with no recycled content. The product’s characteristics make it ideal for the manufacture of prefabricated components for structural floors for rehabilitation works. Finally, the pieces are used in a real rehabilitation case study, highlightining the structural advantages.Este trabajo analiza morteros con diferentes porcentajes de cerámica reciclada como sustituto parcial de la arena. Además el estudio examina las propiedades físicas, químicas y mecánicas de los nuevos morteros, empleando diferentes porcentajes de sustitución (10% - 50%). Con anterioridad, se caracterizaron todos los materiales empleados en este trabajo mediante difracción y fluorescencia de rayos-X. El objetivo fue determinar las diferencias y similitudes en la composición química y mineralógica de los distintos tipos de residuos cerámicos y del resto de áridos utilizados. Los resultados muestran que es posible obtener morteros con menor densidad frente a las muestras sin contenido reciclado. Sus características los hacen idóneos para la creación de piezas prefabricadas de entrevigado para rehabilitación de forjados. Finalmente. Las piezas se usaron en un caso de estudio real, destacando las ventajas estructurales que conlleva su uso

Determinación de las características mecánicas de los muros de fábrica de ladrillo en la arquitectura doméstica sevillana de los siglos XVIII Y XIX

The main aim consists on improving the information technology tools in order to make models of the real situation (constructive, geometrical, resistant) of the structural elements, as well as getting the restoration or support proposals. We have developed the work in some stages: – Analysis,inspection, measurement, and evolution of the building. – Extraction and analysis in laboratory of small samples of masonry walls to determine the strength parameters of materials. – Experimental studie for determination of a model and obtaining the compression stresses of the masonry walls studied. – The monitoring instrumentation which has been used is an accelerograph to evaluate the rigidity of the walls. – Application of Finite Elements Method in order to obtain the stresses distribution before and after any change in the building. The final aim is to be able to compare the results from the laboratory and the stresses distribution from the F.E.M., in order to decide the best way of getting the restoration.El resultado del trabajo permite manejar datos geométricos, constructivos y mecánicos objetivos en el momento de la recuperación de los muros estudiados y los edificios referidos. Las fases seguidas para el desarrollo del método han sido: – Análisis de edificios objeto de rehabilitación: características constructivas del muro a estudiar, levantamiento de lesiones. – Extracción y análisis en laboratorio de pequeñas muestras de la fábrica para la determinación de las características resistentes de sus materiales. – Trabajo experimental en laboratorio para elaboración de un modelo que permita la obtención de la resistencia a compresión de la fábrica estudiada. – Aplicación del acelerógrafo para medir la rigidez del edificio in situ, aproximándonos al módulo de elasticidad del muro de fábrica. – Obtención de conclusiones con la comparación de valores máximos de tensiones obtenidos para una fábrica no fisurada mediante un Análisis de Elementos Finitos, con los valores obtenidos de resistencia en los estudios anteriores. Esta comparación permitirá decidir el comportamiento de los muros ante la restauración

Reuse of Zeolite By-Products Derived from Petroleum Refining for Sustainable Roads

The reduction in consumption of natural resources (fuel, gas, etc.) and contaminant emissions (CO2, CO, NOx, etc.) during the production of asphalt mixtures has become one of the main challenges in road engineering. Warm mix asphalts (WMAs) have been developed in order to achieve this objective while ensuring the mechanical performance and durability of traditional hot mix asphalts (HMAs). However, these materials are commonly manufactured using additives or products whose production could reduce both their environmental benefits and cost effectiveness. /is paper presents a research study that aims to analyse the reuse of zeolite wastes derived from petroleum refining in the production of warm mix asphalts. For this purpose, two different types of zeolite wastes were analysed as additives for the manufacture of two warm mix asphalts, whose mechanical performance was compared with conventional WMA and hot mix asphalt. /e results indicate that zeolite wastes with a lower particles size presented higher capacity to absorb water, while its dosage at 0.3% allows for producing warm mix asphalts at temperatures around 145°C, with comparable workability and densification to conventional HMA at 165°C without reducing its bearing capacity, fatigue life, and resistance to water action and plastic deformation.“Soluciones de Pavimentación Ecológicamente Sostenibles: Ecoasfaltos” funded by the Ministry of Economy and Knowledge of Andalusia and the Ministry of Economy and Competitiveness of Spain in the framework of CTA (Corporación Tecnológica de Andalucía)

Disentangling Vacancy Oxidation on Metallicity-Sorted Carbon Nanotubes

Pristine single-walled carbon nanotubes (SWCNTs) are rather inert to O$_2$ and N$_2$, which for low doses chemisorb only on defect sites or vacancies of the SWCNTs at the ppm level. However, very low doping has a major effect on the electronic properties and conductivity of the SWCNTs. Already at low O$_2$ doses (80 L), the X-ray photoelectron spectroscopy (XPS) O 1s signal becomes saturated, indicating nearly all the SWCNT's vacancies have been oxidized. As a result, probing vacancy oxidation on SWCNTs via XPS yields spectra with rather low signal-to-noise ratios, even for metallicity-sorted SWCNTs. We show that, even under these conditions, the first principles density functional theory calculated Kohn-Sham O 1s binding energies may be used to assign the XPS O 1s spectra for oxidized vacancies on SWCNTs into its individual components. This allows one to determine the specific functional groups or bonding environments measured. We find the XPS O 1s signal is mostly due to three O-containing functional groups on SWCNT vacancies: epoxy (C$_2$$>$O), carbonyl (C$_2$$>$C$=$O), and ketene (C$=$C$=$O), as ordered by abundance. Upon oxidation of nearly all the SWCNT's vacancies, the central peak's intensity for the metallic SWCNT sample is 60\% greater than for the semiconducting SWCNT sample. This suggests a greater abundance of O-containing defect structures on the metallic SWCNT sample. For both metallic and semiconducting SWCNTs, we find O$_2$ does not contribute to the measured XPS O~1s spectra

Análisis sobre la influencia de la densidad en la termografía de infrarrojos y el alcance de esta técnica en la detección de defectos internos en la madera

This paper shows the results of a laboratory phase for the determination of the 1limits of infrared thermography in detecting internal defects in wood and, furthermore, it analyses how the density of this material can influence the surface temperature displayed in a thermogram. To this end, experimental work is carried out whereby a series of work and environmental parameters are monitored (such as environmental temperature, relative humidity, distance to target), and the process is systematized by using pieces of different wood species (different densities) and by devising a set of samples for which various possible cases are analysed in terms of size and internal position of the damage. Similarly, using these samples, a study has been conducted on the effect on the thermal image produced by an increase of humidity inside the defect phenomena normally associated with wood decay.<br><br>En el presente artículo se muestran los resultados obtenidos en una fase de laboratorio al tratar de determinar el alcance de la termografía de infrarrojos en la detección de defectos internos en la madera y, por otro lado, cómo interviene la densidad de este material sobre la temperatura superficial mostrada en un termograma. Para ello se ha desarrollado un trabajo experimental donde se han controlado una serie de parámetros ambientales y de trabajo (temperatura ambiente, humedad relativa, distancia al objetivo…), y se ha sistematizado el proceso utilizando piezas de distintas especies de madera (distintas densidades) y diseñando una serie de probetas donde se han analizado varias casuísticas posibles en cuanto a tamaño y posición interna de los daños. Análogamente, sobre estas probetas se ha estudiado el efecto que produce sobre la imagen termográfica un incremento de humedad interna en el defecto asociada normalmente a los fenómenos de pudrición de la madera