Determination of Pinning Parameters in Flux Creep-Flow Model for E-J characteristics of High Temperature Superconductors by using Differential Evolution

The pinning parameters such as strength of pinning force, temperature dependence of pinning force and so on using in flux creep-flow model to explain electric field vs current density (E-J) characteristics were determined by Differential Evolution (DE). DE is one of the methods in Evolutionary Computation (EC) to find an optimization of a problem. First, a model data of E-J characteristics in which the pinning parameters were given was prepared, and it was confirmed that DE can find the given pinning parameters from the model data. Then, DE and mesh method were used to determine the pinning parameters in experimental E-J characteristics of GdBa2CuO7-δ high temperature superconductor. In mesh method, the all combinations of pinning parameters with constant interval for each parameter are calculated, and best set of pinning parameters is selected. It was found that DE shows better performance than mesh method in terms of calculation time and accuracy for determining pinning parameters

Current-carrying capacity of single layer cable using superconducting Bi-2223 tapes in a parallel magnetic field

It was theoretically shown by the authors that the current-carrying capacity of superconducting dc power cable can be enhanced by choosing a force-free configuration under a parallel magnetic field produced by the current flowing back in the outer shielding conductor. This was experimentally checked for a single layer cable using Bi-2223 tapes in an applied parallel magnetic field. It was found that the current-carrying capacity took on a peak value under the force-free condition for the total magnetic field, including the self-field. This shows that the proposed structure is suitable for practical dc power transmission. The possibility of the innovative dc superconducting power cable with multi-layers with higher current-carrying capacity is discussed

Evaluation of trapped magnetic field properties in superconducting MgB2 bulk magnets by finite element method

The trapped magnetic field properties in superconducting MgB2 bulk magnets with various kinds of shape such as a disk, a ring and a pair of disks were calculated by the finite element method (FEM). For simplicity, field cool magnetization was replaced by a simple magnetization process at constant temperature to obtain equivalent distribution of magnetic field, and the thermal equation in FEM was omitted. It was confirmed that the result of FEM agreed well with the result by analytical method in infinite long cylinder. We compared the trapped magnetic field property between FEM result and experimental result in reference in order to research the simple evaluation method of the trapped magnetic field of MgB2 bulk magnet. It was found that the result of FEM agreed with the experimental result and it can explain the distribution of trapped magnetic field of superconducting MgB2 bulk magnet. From these results, it was found that it was possible to be calculated in various kinds of shape with using simple evaluation by FEM. Therefore, the optimization of the maximum trapped magnetic field in superconducting MgB2 bulk magnet can be discussed.Proceedings of the 27th International Symposium on Superconductivity (ISS 2014) November 25-27, 2014, Tokyo, Japa

Evaluation of Magnetic Cutting and Polishing with Superconducting Bulks

In this paper, magnetic levitation tool with superconducting bulks is introduced as a new hollow machining technology. Magnetic levitation tool is the machine that magnet levitates above superconducting bulks and driving force of rotating magnet shaves the object. This tool is expected to use for a grinding machine and machining device because of hollow machining and micromachining by strong fixing. For using magnetic levitation tool, the attractive force, the repulsive force and rotating torque are important for grinding machine, machining outer surface and both, respectively. These forces are calculated by FEM, and compared with experimental results. The experimental results are agreed well with calculated results. However, the attractive force is one order smaller than that required in chemical mechanical polishing

Current-carrying capacity of single layer cable using superconducting Bi-2223 tapes in a parallel magnetic field

It was theoretically shown by the authors that the current-carrying capacity of superconducting dc power cable can be enhanced by choosing a force-free configuration under a parallel magnetic field produced by the current flowing back in the outer shielding conductor. This was experimentally checked for a single layer cable using Bi-2223 tapes in an applied parallel magnetic field. It was found that the current-carrying capacity took on a peak value under the force-free condition for the total magnetic field, including the self-field. This shows that the proposed structure is suitable for practical dc power transmission. The possibility of the innovative dc superconducting power cable with multi-layers with higher current-carrying capacity is discussed

Condensation energy density properties of Ba-122 pnictide superconductor with columnar defects introduced by heavy-ion irradiation

It is important to investigate condensation energy density of superconducting material, since it determines its pinning property. According to the heavy-ion irradiation, the columnar defects are introduced to the superconductor which act as the strong pinning centers, and the critical current density is enhanced by the new pinning centers. Since the number density and the size of the columnar defects can be observed, the condensation energy density is estimated by using the pinning summation theory. In the present study, we prepared Ba(Fe0.93Co0.07)2As2 (Ba-122) pnictide superconductors by self-flux method. 200 MeV Au ions were irradiated into the specimens along c-axis and the matching field was 2 T. After the irradiation, the critical current density was 6 times larger than that before the irradiation. The estimated condensation energy density is in the order of 104 J/m3 and is slightly smaller than those of cuprate superconductors. The temperature dependence is similar to that of YBa2Cu3Ox oxide superconductors, since the anisotropy parameter is small in Ba-122. Therefore, it is expected to use Ba-122 at high temperatures near the critical temperature.Superconductivity Centennial Conference 2011 - EUCAS–ISEC–ICMC, Sep 18 - 23, 2011, Hague, Netherland

Estimation of Machine Parameters in Superconducting Transformer using Differential Evolution

To analyze the inrush current in a superconducting transformer, the machine parameters for the transformer were estimated from the measured current using a search algorithm. To address the large rising edge error in estimations performed using a genetic algorithm (GA), a differential evolution (DE) was used in this study. As a result, the estimated time was reduced to about 1/10 that obtained with GA, and the evaluation value indicating the difference between the measured value and the estimated value was reduced to about 1/2. Thus, it was possible to estimate with higher accuracy by using DE.32nd International Symposium on Superconductivity (ISS2019), 3-5 December, 2019, Kyoto, Japa

Evaluation of superconductor assisted machining (SUAM) with superconducting coated conductors using the finite element method

In the present study, we numerically calculated the magnetic levitation force for superconductor assisted machining (SUAM) using the finite element method. Although we usually use bulk superconductors for magnetic levitation in SUAM, we herein considered magnetic levitation using superconductor-coated conductors. We were able to explain the experimental results on the forces of the coated conductors as well as bulk theoretically. For both bulk and coated conductor, the repulsive force was found to increase as the distance from the permanent magnet became shorter. For the coated materials, both the repulsive and attractive forces were lower than in the case of bulk superconductors. This is because the volume of superconducting material was smaller than in the case of bulk superconductors, since the overall size of both materials was the same. However, we believe that greater forces can be obtained by increasing the number of coated conductors.32nd International Symposium on Superconductivity (ISS2019), 3-5 December, 2019, Kyoto, Japa

TRPC5 ion channel permeation promotes weight gain in hypercholesterolaemic mice

Transient Receptor Potential Canonical 5 (TRPC5) is a subunit of a Ca2+-permeable non-selective cationic channel which negatively regulates adiponectin but not leptin in mice fed chow diet. Adiponectin is a major anti-inflammatory mediator and so we hypothesized an effect of TRPC5 on the inflammatory condition of atherosclerosis. Atherosclerosis was studied in aorta of ApoE−/− mice fed western-style diet. Inhibition of TRPC5 ion permeation was achieved by conditional transgenic expression of a dominant negative ion pore mutant of TRPC5 (DNT5). Gene expression analysis in adipose tissue suggested that DNT5 increases transcript expression for adiponectin while decreasing transcript expression of the inflammatory mediator Tnfα and potentially decreasing Il6, Il1β and Ccl2. Despite these differences there was mild or no reduction in plaque coverage in the aorta. Unexpectedly DNT5 caused highly significant reduction in body weight gain and reduced adipocyte size after 6 and 12 weeks of western-style diet. Steatosis and circulating lipids were unaffected but mild effects on regulators of lipogenesis could not be excluded, as indicated by small reductions in the expression of Srebp1c, Acaca, Scd1. The data suggest that TRPC5 ion channel permeation has little or no effect on atherosclerosis or steatosis but an unexpected major effect on weight gain