Autocorrelation of the Ground Vibrations Recorded by the SEIS-InSight Seismometer on Mars

Since early February 2019, the SEIS (Seismic Experiment for Interior Structure) seismometer deployed at the surface of Mars in the framework of the InSight mission has been continuously recording the ground motion at Elysium Planitia. In this study, we take advantage of this exceptional data set to put constraints on the crustal properties of Mars using seismic interferometry (SI). To carry out this task, we first examine the continuous records from the very broadband seismometer. Several deterministic sources of environmental noise are identified and specific preprocessing strategies are presented to mitigate their influence. Applying the principles of SI to the single-station configuration of InSight, we compute, for each Sol and each hour of the martian day, the diagonal elements of the time-domain correlation tensor of random ambient vibrations recorded by SEIS. A similar computation is performed on the diffuse waveforms generated by more than a hundred Marsquakes. A careful signal-to-noise ratio analysis and an inter-comparison between the two datasets suggest that the results from SI are most reliable in a narrow frequency band around 2.4 Hz, where an amplification of both ambient vibrations and seismic events is observed. The average autocorrelation functions (ACFs) contain well identifiable seismic arrivals, that are very consistent between the two datasets. Interpreting the vertical and horizontal ACFs as, respectively, the P- and S- seismic reflectivity below InSight, we propose a simple stratified velocity model of the crust, which is mostly compatible with previous results from receiver function analysis. Our results are discussed and compared to recent works from the literature.This study is InSight contribution number 164. The authors acknowledge both “Université Fédérale de Toulouse Midi Pyrénées” and the “Région Occitanie” for funding the PhD grant of Nicolas Compaire. The French authors acknowledge the French Space Agency CNES and ANR (ANR-14-CE36-0012-02 and ANR-19-CE31-0008-08) for funding the InSight Science analysis

Single-station moment tensor inversion on Mars

In early 2019, NASA's InSight lander successfully deployed a single three-component very broadband seismometer (VBB) on the surface of Mars to detect and characterize marsquakes. Using these data, we present a method to infer the source mechanisms of marsquakes from waveforms of P and S waves recorded at a single station. We show that the three events with the highest signal-to-noise ratio (SNR) and a robust distance estimate S0173a, (May 23rd 2019), S0235b, (July 27th 2019) and S0183a, (June 3rd 2019) are all likely the results of normal faulting, suggesting an extensional regime mainly oriented south-east north-west in the respective source regions, Cerberus Fossae and Orcus Patera. We quantify the uncertainty of our solutions by comparing results of a direct inversion with a grid-search method

InSight seismic data from Mars: Effect and treatment of transient data disturbances.

The instrument package SEIS (Seismic Experiment for Internal Structure) with the two co-located seismometers VBB and SP is installed on the surface of Mars as part of NASA's InSight mission. When compared to terrestrial installations, SEIS is deployed in a very harsh wind and temperature environment that leads to inevitable degradation of the quality of the recorded data. The daily atmospheric temperature variations of approx. 80K are attenuated by different insulation layers to approx. 15K peak-to-peak at the sensor level. Typical wind speeds vary between 0 and 5 m/s leading to a diurnal variation in the broad-band rms noise level by two orders of magnitude. One ubiquitous artifact in the raw broad-band data is an abundance of one-sided, transient pulses often accompanied by high-frequency spikes. We show that these pulses, which we term "glitches", can be modeled as the response of the instrument to a step in acceleration, while the spikes can be modeled as the response to a simultaneous step in displacement. We attribute the glitches primarily to intermittent stress relaxation events internal to SEIS caused by the large diurnal temperature variations to which the instrument is exposed during a Martian sol. Only a small fraction of glitches correspond to a motion of the SEIS package as a whole caused by minuscule tilts of the instrument. Whilst such kind of data disturbances are typically discarded when occurring in terrestrial data, this is no option for the data returned from the Red Planet. We therefore do not only demonstrate their effects on the seismic data and analyze their origins, but also propose algorithms that are able to detect and remove many of these (mostly) non-seismic signals. We further published our codes (both Python and MATLAB) so that interested researchers can make their own choices on how to treat the data and to which extent

SEIS first year: nm/s^2 (and less) broadband seismology on Mars and first steps in Mars-Earth-Moon comparative seismology. (Invited)

AGU Fall Meeting 2019 in San Francisco , 9-13 December 2019EIS/InSIght teamInSight is the first planetary mission with a seismometer package, SEIS, since the Apollo Lunar Surface Experiments Package. SEIS is complimented by APSS, which has as a goal to document the atmospheric source of seismic noise and signals. Since June 2019, SEIS has been delivering 6 axis 20 sps continuous seismic data, a rate one order of magnitude larger originally planned. More than 50 events have been detected by the end of July 2019 but only three have amplitudes significantly above the SEIS instrument requirement. Two have clear and coherent arrivals of P and S waves, enabling location, diffusion/attenuation characterization and receiver function analysis. The event¿s magnitudes are likely ¿ 3 and no clear surface waves nor deep interior phases have been identified. This suggests deep events with scattering along their final propagation paths and with large propagation differences as compared to Earth and Moon quakes. Most of the event¿s detections are made possible due to the very low noise achieved by the instrument installation strategy and the very low VBB self-noise. Most of the SEIS signals have amplitudes of spectral densities in the 0.03-5Hz frequency bandwidth ranging from 10-10 m/s2/Hz1/2 to 5 10-9 m/s2/Hz1/2. The smallest noise levels occurs during the early night, with angstrom displacements or nano-radian tilts. This monitors the elastic and seismic interaction of a planetary surface with its atmosphere, illustrated not only by a wide range of SEIS signals correlated with pressure vortexes, dust devils or wind activity but also by modulation of resonances above 1 Hz, amplified by ultra-low velocity surface layers. After about one half of a Martian year, clear seasonal changes appear also in the noise, which will be discussed. One year after landing, the seismic noise is therefore better and better understood, and noise correction techniques begun to be implemented, either thanks to the APSS wind and pressure sensors, or by SEIS only data processing techniques. These data processing techniques open not only the possibility of better signal to noise ratio of the events, but are also used for various noise auto-correlation techniques as well as searches of long period signals. Noise and seismic signals on Mars are therefore completely different from what seismology encountered previously on Earth and Moon