3,222 research outputs found
Adaptive learning program for developing employability skills
The paper aims to demonstrate the benefits of adaptive learning technologies as a viable alternative to time consuming tutor led individual support. It proposes to reveal how adaptive learning interventions can be effective in enriching student learning while targeting precise areas of development. This review will compile evidence on the nature and extent of Adaptive Learning tools used to develop employability skills among Higher Education institutions. This will be specifically for students undergoing studies at the graduate level. Given the short time available, a scoping study framework will be used to examine the scope of carrying out a full systematic review or identifying gaps in existing literature (Arksey and OāMalley, 2005). This design follows the general principles of a systematic review by following preāspecified methods to reduce the risk of bias by selecting favourable studies, and extracting and analysing data that backs a particular hypothesis. That is, the methods are determined a priori, and are transparent and replicable
STS-133/ET-137 Tanking Test Photogrammetry Assessment
Following the launch scrub of Space Shuttle mission STS-133 on November 5, 2010, an anomalous condition of cracked and raised thermal protection system (TPS) foam was observed on the External Tank (ET). Subsequent dissection of the affected TPS region revealed cracks in the feet of two Intertank (IT) metallic stringers. An extensive investigation into the cause(s) and corrective action(s) for the cracked stringers was initiated, involving a wide array of material and structural tests and nondestructive evaluations, with the intent to culminate into the development of flight rational. One such structural test was the instrumented tanking test performed on December 17, 2010. The tanking test incorporated two three-dimensional optical displacement measurement systems to measure full-field outer surface displacements of the TPS surrounding the affected region that contained the stringer cracks. The results showed that the radial displacement and rotation of the liquid oxygen (LO2) tank flange changed significantly as the fluid level of the LO2 approached and passed the LO2 tank flange
Recommended from our members
Carbon Catcher Design Report
Overview. The design of the overall Carbon Catcher project can be separated into four distinct systems, each of which is assigned a specialized committee. The committee names and responsibilities are listed below:
Air Mover
The overall goal for the Air Mover committee is the design of the turbine assembly. As the overall goal of the project is to collect and separate carbon dioxide from the air, one of the most important parts is to actually get the air to pass through the carbon-catching
membrane. Passive air would not give a significant enough yield rate to make the carbon dioxide collection rate impactful, thus air must be sucked through a vacuum/turbine.
Membrane
The goal of Membrain is to create a membrane that can filter out CO2 through various methods. These methods are limited, due to there being such variety, to certain techniques and membrane material types that have been decided, prior, by the committee. Most membranes will be geared towards utilizing temperature and pressure along with gaseous speed and flow rate. In addition, examining certain treatments, such as regeneration of material, and replacements will be looked into as well, to see how it fares in sustainability.
Carbon Storer
The Carbon Storer committee will design a store and transport system for fluid CO2 after it is extracted from the atmosphere. Primary considerations include geological solutions, cost-effective materials, and analysis methods to improve overall capacity and efficiency. Additionally, the committee will select an environmentally and economically sustainable method of recycling the captured CO2.
PyControl
The PyControl committee will design a series of sensors and actuators, which will primarily support the sequestration and pipeline systems present in the Carbon Storer Committee and direct air capture system in Air Mover. The design can be broken into four control layers: Input/Output, Field Controllers, Data, and Supervisory.
Goal
The overarching goal of Carbon Catcher is to design a cost-effective, scalable atmospheric carbon dioxide removal system that is capable of being deployed in a variety of urban environments and may fit a variety of different customer requirements or requests
Cyclic Sieving of Increasing Tableaux and small Schr\"oder Paths
An increasing tableau is a semistandard tableau with strictly increasing rows
and columns. It is well known that the Catalan numbers enumerate both
rectangular standard Young tableaux of two rows and also Dyck paths. We
generalize this to a bijection between rectangular 2-row increasing tableaux
and small Schr\"oder paths. We demonstrate relations between the jeu de taquin
for increasing tableaux developed by H. Thomas and A. Yong and the
combinatorics of tropical frieze patterns. We then use this jeu de taquin to
present new instances of the cyclic sieving phenomenon of V. Reiner, D.
Stanton, and D. White, generalizing results of D. White and of J. Stembridge.Comment: 20 page
Preliminary Sizing Study of Ares-I and Ares-V Liquid Hydrogen Tanks
A preliminary sizing study of two cryogenic propellant tanks was performed using a FORTRAN optimization program to determine weight efficient orthogrid designs for the tank barrels sections only. Various tensile and compressive failure modes were considered, including general buckling of cylinders with a shell buckling knockdown factor. Eight independent combinations of three design requirements were also considered and their effects on the tanks weight. The approach was to investigate each design case with a variable shell buckling knockdown factor, determining the most weight efficient combination of orthogrid design parameters. Numerous optimization analyses were performed, and the results presented herein compare the effects of the different design requirements and shell buckling knockdown factor. Through a series of comparisons between design requirements or shell buckling knockdown factors, the relative change in overall tank barrel weights is shown. The findings indicate that the design requirements can substantually increase the tank weight while a less conservative shell buckling knockdown factor can modestly reduce the tank weight
Innovative online learning in entrepreneurship education: The impact of embedding real-life industry practice in the virtual learning environment
Applied areas of entrepreneurship are growing in popularity due to the ongoing need for students to gain specialised skills to find employment after graduation. This study explores how educational scaffolding can facilitate the delivery of online experiential activities to improve the entrepreneurial learning experience and the performance of music management students by using information and communications technology tools within the virtual learning environment. A case study methodology was adopted to present two scenarios of innovative online learning delivered in a postgraduate programme in music management. This research takes into consideration the difficult transitional journey for some students from studying to being immediately thrust into the workplace, which often requires different types of knowledge, experience, skills and competences. The findings show that, by strengthening industry links, tutors can build a portfolio of online practical activities that represent the āreal-lifeā industry, helping to forge long-term, collaborative partnerships to facilitate learnersā acquisition of more meaningful knowledge and opportunities
Buckling Design and Analysis of a Payload Fairing One-Sixth Cylindrical Arc-Segment Panel
Design and analysis results are reported for a panel that is a 16th arc-segment of a full 33-ft diameter cylindrical barrel section of a payload fairing structure. Six such panels could be used to construct the fairing barrel, and, as such, compression buckling testing of a 16th arc-segment panel would serve as a validation test of the buckling analyses used to design the fairing panels. In this report, linear and nonlinear buckling analyses have been performed using finite element software for 16th arc-segment panels composed of aluminum honeycomb core with graphiteepoxy composite facesheets and an alternative fiber reinforced foam (FRF) composite sandwich design. The cross sections of both concepts were sized to represent realistic Space Launch Systems (SLS) Payload Fairing panels. Based on shell-based linear buckling analyses, smaller, more manageable buckling test panel dimensions were determined such that the panel would still be expected to buckle with a circumferential (as opposed to column-like) mode with significant separation between the first and second buckling modes. More detailed nonlinear buckling analyses were then conducted for honeycomb panels of various sizes using both Abaqus and ANSYS finite element codes, and for the smaller size panel, a solid-based finite element analysis was conducted. Finally, for the smaller size FRF panel, nonlinear buckling analysis was performed wherein geometric imperfections measured from an actual manufactured FRF were included. It was found that the measured imperfection did not significantly affect the panel's predicted buckling respons
Innovative online learning in entrepreneurship education: The impact of embedding real-life industry practice in the virtual learning environment
Applied areas of entrepreneurship are growing in popularity due to the ongoing need for students to gain specialised skills to find employment after graduation. This study explores how educational scaffolding can facilitate the delivery of online experiential activities to improve the entrepreneurial learning experience and the performance of music management students by using information and communications technology tools within the virtual learning environment. A case study methodology was adopted to present two scenarios of innovative online learning delivered in a postgraduate programme in music management. This research takes into consideration the difficult transitional journey for some students from studying to being immediately thrust into the workplace, which often requires different types of knowledge, experience, skills and competences. The findings show that, by strengthening industry links, tutors can build a portfolio of online practical activities that represent the āreal-lifeā industry, helping to forge long-term, collaborative partnerships to facilitate learnersā acquisition of more meaningful knowledge and opportunities
Analysis of a Circular Composite Disk Subjected to Edge Rotations and Hydrostatic Pressure
The structural analysis results for a graphite/epoxy quasi-isotropic circular plate subjected to a forced rotation at the boundary and pressure is presented. The analysis is to support a specialized material characterization test for composite cryogenic tanks. Finite element models were used to ensure panel integrity and determine the pressure necessary to achieve a predetermined equal biaxial strain value. The displacement results due to the forced rotation at the boundary led to a detailed study of the bending stiffness matrix [D]. The variation of the bending stiffness terms as a function of angular position is presented graphically, as well as, an illustrative technique of considering the laminate as an I-beam
- ā¦