11 research outputs found

    Processing and characterization of glass-ceramic foams belonging to the Li2O-ZrO2-Al2O3-SiO2 (LZSA) system produced by gelcasting

    Get PDF
    In this work the viscosimetry technique was used to evaluate the rheological characteristics of ceramic suspensions prepared with a LZSA (Li2O-ZrO2-SiO2-Al2O3) glass. From the rheological characterization it was possible to establish optimized conditions of solid fraction, dispersant, organic monomers and foaming agent for the production of glass-ceramic foams by gelcasting. The resulting foams were subjected to heattreatments at 200-500ºC/60 min, for degradation of organics and at 950ºC/60 min for sintering and crystallization. With the obtained porous ceramic bodies linear thermal shrinkage, apparent density and mechanical strength measurements as well as microstructural analysis were performed. The adaptation of the rheological characteristics of the LZSA parent glass powder with the gelcasting processing technique allowed the production of ceramic foams with high open and interconnected porosity (>90%) with good thermal stability and with mechanical strength suitable for the production of porous ceramics.Neste trabalho, a técnica de viscosimetria foi utilizada para avaliar as características reológicas de suspensões preparadas com precursor vitrocerâmico do sistema LZSA (Li2O-ZrO2-SiO2-Al2O3). A partir da caracterização reológica, foi possível estabelecer condições composicionais adequadas de fração de sólidos, dispersante e monômeros orgânicos. A quantidade de agente espumante para produção de espumas vitrocerâmicas por gelcasting foi determinada pela variação volumétrica após agitação. As espumas resultantes foram submetidas a tratamentos térmicos no intervalo de temperatura compreendido entre 200 e 500ºC/60 min, para degradação da matéria orgânica e a 950ºC/60 min para sinterização e cristalização. Com os corpos cerâmicos porosos foram realizadas medidas de retração térmica, densidade aparente, análise microestrutural e resistência mecânica. A adequação das características reológicas do precursor LZSA por gelcasting permitiu a produção de espumas com elevada porosidade (> 90%) aberta e interconectada com boa estabilidade térmica e com resistência mecânica compatível com cerâmicas [email protected]@[email protected]@emc.ufsc.brUniversidade Federal de Santa Catarina Departamento de Engenharia Mecânica Programa de Pós-Graduação em Ciência e Engenharia de MateriaisCentro Universitário Barriga Verde - UNIBAVEUniversidade Federal de São Paulo (UNIFESP) Departamento de Ciência e TecnologiaUNIFESP, Depto. de Ciência e TecnologiaSciEL

    Statistical test for ΔρDCCA: Methods and data

    No full text
    In this paper the algorithm for ΔρDCCA statistical test (Guedes et al., 2018) [1] is presented. Our test begins with the simulation of four time series pairs, by an ARFIMA process. These time series has N=250, 500, 1000, and 2000 points, see Guedes et al. (2018) [1]. The probability distribution function (PDF) is made available for all 10,000 samples, that start from the original time series, in supplementary material

    Fontes de fibra de coprodutos agroindustriais protéicos para coelhos em crescimento Fiber sources of proteic agricultural co-products for growing rabbits

    No full text
    Este trabalho teve por objetivo estudar a influência da fibra oriunda de diferentes fontes (feno de alfafa, farelo de linhaça e farelo proteinoso de milho) sobre o desempenho, coeficientes de digestibilidade e características da carne de coelhos em crescimento. Os animais foram distribuídos em um delineamento inteiramente casualizado com três tratamentos e oito repetições, sendo uma ração referência e duas rações testes: FA - ração controle, com feno de alfafa; FL - substituição total do feno de alfafa por farelo de linhaça e FP - substituição total do feno de alfafa por farelo proteinoso de milho. Os resultados foram submetidos à análise de variância e as médias comparadas pelo teste Duncan (P<0,05). A maior quantidade de hemicelulose e a baixa capacidade de hidratação das dietas FA e FP proporcionaram maior peso vivo dos animais aos 89 dias (2123 e 1934 g, respectivamente) contra 1797 g da dieta FL e melhor coeficiente de digestibilidade da MS e MO (média de 80,80 para MS e 81,76% para MO, respectivamente) em relação à dieta FL (73,86 e 75,84%, respectivamente). A dieta FP apresentou maior coeficiente de digestibilidade para a FDN (56,59%) contra a média de 33,11% para as demais dietas. A força de cisalhamento foi menor para a carne dos animais alimentados com FA e FP (1,90 e 1,63 kgf) em comparação com a FL (2,33 kgf) (P<0,05), o que indica carne mais macia. O farelo proteinoso de milho proporcionou peso vivo dos animais aos 89 dias semelhante ao do feno de alfafa. O farelo de linhaça, pela grande quantidade de fibra solúvel e alta capacidade higroscópica, prejudicou o desempenho dos animais e a maciez da carne.<br>The objective of this paper was to study the influence of fiber fractions from different sources (alfalfa hay, linseed bran and corn gluten meal) on performance, digestibility coefficients and meat characteristics of growing rabbits. The animals were distributed into a completely randomized design with three treatments and eight replications, with one reference and two test diets: AH- control diet, with alfalfa hay; LB- total substitution of alfalfa hay by linseed bran and GM- total substitution of alfalfa hay by corn gluten meal. The data were submitted to variance analysis and the averages were compared by Duncan test (P<.05). The largest amount of hemicellulose and the low hydration capacity of the diets AF and GM proportioned greater animals live weight at 89 days of age (2123 and 1934 g, respectively) versus 1797 g of the animals fed with the diet LB and better digestibility coeficients of DM and OM (average of 80.80 for DM and 81.76% for OM, respectively) in relation to diet LB (73.86 and 75.84%, respectively). The diet GM showed a higher digestibility coefficient of NDF (56.59%) against the average of 33.11% for the other diets. The shear force was lower for meat from animals fed with AH and GM (1.90 and 1.63 kgf) compared to LB (2.33 kgf) (P<.05), which indicates meat tenderness. The corn gluten meal proportioned live weight to the animals at 89 days of age similar to the alfalfa hay. The linseed bran, due to large amount of soluble fiber and high hydration capacity, impaired animal performance and meat tenderness
    corecore