States of Pt/CeO2 catalysts for CO oxidation below room temperature.

CO molecules can be efficiently oxidized over Pt/CeO2 catalysts, but the stability and reactivity of different states of Pt in the catalysts are still unclear. Here we combine experimental and computational methods to characterize Pt/CeO2 catalysts subjected to reductive and oxidative pre-treatments and exposed to CO oxidation reaction conditions. Particles of metallic Pt, known to be catalytically active at elevated temperature, are shown to be precursors for the formation, under operando conditions, of more stable PtOx particles that enable CO oxidation below room temperature. These PtOx particles are also similarly stable to - but more active than - atomically dispersed Pt2+ species. The results and approaches presented in this study illustrate the complex response of catalytic materials to reaction conditions and pave the way for future efforts to improve Pt/CeO2 and similar catalysts using dedicated pre-treatment strategies

Influence of Titania Synthesized by Pulsed Laser Ablation on the State of Platinum during Ammonia Oxidation

A set of physicochemical methods, including X-ray photoelectron spectroscopy (XPS), X-ray diffraction, electron microscopy and X-ray absorption spectroscopy, was applied to study Pt/TiO$_{2}$ catalysts prepared by impregnation using a commercial TiO$_{2}$-P25 support and a support produced by pulsed laser ablation in liquid (PLA). The Pt/TiO$_{2}$-PLA catalysts showed increased thermal stability due to the localization of the highly dispersed platinum species at the intercrystalline boundaries of the support particles. In contrast, the Pt/TiO$_{2}$-P25 catalysts were characterized by uniform distribution of the Pt species over the support. Analysis of Pt4f XP spectra shows that oxidized Pt$^{2+}$ and Pt$^{4+}$ species are formed in the Pt/TiO$_{2}$-P25 catalysts, while the platinum oxidation state in the Pt/TiO$_{2}$-PLA catalysts is lower due to stronger interaction of the active component with the support due to strong interaction via Pt-O-Ti bonds. The Pt4f XP spectra of the samples after reaction show Pt$^{2+}$ and metallic platinum, which is the catalytically active species. The study of the catalytic properties in ammonia oxidation showed that, unlike the catalysts prepared with a commercial support, the Pt/TiO$_{2}$-PLA samples show higher stability during catalysis and significantly higher selectivity to N$_{2}$ in a wide temperature range of 200–400 °C

In situ probing of Pt/TiO2_{2} activity in low-temperature ammonia oxidation

The improvement of the low-temperature activity of the supported platinum catalysts in selective ammonia oxidation to nitrogen is still a challenging task. The recent developments in in situ/operando characterization techniques allows to bring new insight into the properties of the systems in correlation with their catalytic activity. In this work, near ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) and operando X-ray absorption spectroscopy (XAS) techniques were applied to study Pt/TiO$_{2}$ catalysts in ammonia oxidation (NH$_{3}$ + O$_{2}$ reaction). Several synthesis methods were used to obtain samples with different size of Pt particles, oxidation state of Pt, and morphology of the support. Metal platinum particles on titania prepared by pulsed laser ablation in liquids exhibited the highest activity at lower temperatures with the temperature of 50% conversion of NH$_{3}$ being 150 °C. The low-temperature activity of the catalysts synthesized by impregnation can be improved by the reductive pretreatment. NAP-XPS and operando XANES data do not show formation of PtO$_{x}$ surface layers or PtO/PtO$_{2}$ oxides during NH$_{3}$ + O$_{2}$ reaction. Despite the differences in the oxidation state of platinum in the as-prepared catalysts, their treatment in the reaction mixture results in the formation of metallic platinum particles, which can serve as centers for stabilization of the adsorbed oxygen species. Stabilization of the bulk platinum oxide structures in the Pt/TiO$_{2}$ catalysts seems to be less favorable due to the metal–support interaction

Society, State, Nation and the People in the Democratic South Africa: Two Decades of Illusions in The Practice of Public Administration, Development Planning and Management

The purpose of this article is to provide a conceptual argument in that as South Africa transcended beyond its democratic dispensation, an opportunity was missed in the process leading to transition to define a society, state, nation and the people for sustaining the democratic founding for purposes of public administration practice, development planning and management. That is done by critically portraying South Africa as a society, state, nation and locating the people for governance purposes within a democratic founding. It is argued that attempts are made to rewrite the history of the country with a view of bolstering its societal status, nation, state and the people without a profound context. South Africa has become what it is today due to its history that remains its defining factor if it has to locate its society, state, nation and the people. Having lost that opportunity during transition, governance has become so unwieldy in that those assigned with authority in the governance landscape, tend to confuse the roles of society, nation, state and the people and that eventually strain the fragile democracy by distorting the facts and the role of constitutional apparatus that are instrumental to the country’s democratic founding. The conclusion is rather pessimistic in that as long as these issues are not properly located within the governance landscape; the democratic dispensation remains vulnerable for demise just like other democracies within the African continent with the potential of the middle class hijacking it from the vulnerable poor majority being the people that public administration practice has to serve. DOI: 10.5901/mjss.2015.v6n2s1p61

Peculiarities of structure and morphology of copper-cerium nanopowders produced by laser ablation

Copper-cerium nanopowders CuOx–CeO2 (mass ratio Cu:Ce = 6:100) are prepared by mixing the dispersions of the copper and cerium oxides produced by the method of pulse laser ablation (PLA) in liquid, followed by drying. The initial dispersions of copper oxides were prepared by the method of PLA of a metal copper target in distilled water or 1% hydrogen peroxide solution, and those of cerium oxide – by PLA of metal cerium in distilled water. It is shown that ablation of copper in water and water solution of peroxide is followed by the formation of copper oxide particles of different morphologies and compositions (structure). It is established that no crystal phases of copper oxides are formed in the copper-cerium nanopowders produced from separate dispersions. Given this approach to forming copper-cerium nanoparticles, the oxidized copper is distributed in the form of a thin layer on the CeO2 surface, which is demonstrated by the results of investigation of these particles by the methods of high-resolution transmission electron microscopy and X-ray diffraction. The formation of a Cu–O–Ce interface at the interphase boundary gives rise to the formation of defects on the CeO2 surface, which is confirmed by the Raman spectroscopy. An investigation of the composition and electronic structure of the surface of CuOx nanoparticles and CuOx–CeO2 nanopowders performed by the method of X-ray photoelectronic spectroscopy reveals the presence of copper in the form of a combination of Cu (I) and Cu (II) with the prevailing contribution from a single-valence state for CuOx–CeO2 nanopowders, which could have resulted from the interaction between CuOx and CeO2 particles

Hydrogen Production through Autothermal Reforming of Ethanol: Enhancement of Ni Catalyst Performance via Promotion

Autothermal reforming of bioethanol (ATR of C2H5OH) over promoted Ni/Ce0.8La0.2O1.9 catalysts was studied to develop carbon-neutral technologies for hydrogen production. The regulation of the functional properties of the catalysts was attained by adjusting their nanostructure and reducibility by introducing various types and content of M promoters (M = Pt, Pd, Rh, Re; molar ratio M/Ni = 0.003–0.012). The composition–characteristics–activity correlation was determined using catalyst testing in ATR of C2H5OH, thermal analysis, N2 adsorption, X-ray diffraction, transmission electron microscopy, and EDX analysis. It was shown that the type and content of the promoter, as well as the preparation mode (combined or sequential impregnation methods), determine the redox properties of catalysts and influence the textural and structural characteristics of the samples. The reducibility of catalysts improves in the following sequence of promoters: Re < Rh < Pd < Pt, with an increase in their content, and when using the co-impregnation method. It was found that in ATR of C2H5OH over bimetallic Ni-M/Ce0.8La0.2O1.9 catalysts at 600 °C, the hydrogen yield increased in the following row of promoters: Pt < Rh < Pd < Re at 100% conversion of ethanol. The introduction of M leads to the formation of a NiM alloy under reaction conditions and affects the resistance of the catalyst to oxidation, sintering, and coking. It was found that for enhancing Ni catalyst performance in H2 production through ATR of C2H5OH, the most effective promotion is with Re: at 600 °C over the optimum 10Ni-0.4Re/Ce0.8La0.2O1.9 catalyst the highest hydrogen yield 65% was observed

Ru Catalysts Supported on Bamboo-like N-Doped Carbon Nanotubes: Activity and Stability in Oxidizing and Reducing Environment

The catalysts with platinum-group metals on nanostructured carbons have been a very active field of research, but the studies were mainly limited to Pt and Pd. Here, Ru catalysts based on nitrogen-doped carbon nanotubes (N-CNTs) have been prepared and thoroughly characterized; Ru loading was kept constant (3 wt.%), while the degree of N-doping was varied (from 0 to 4.8 at.%) to evaluate its influence on the state of supported metal. Using the N-CNTs afforded ultrafine Ru particles (<2 nm) and allowed a portion of Ru to be stabilized in an atomic state. The presence of Ru single atoms in Ru/N-CNTs expectedly increased catalytic activity and selectivity in the formic acid decomposition (FAD) but had no effect in catalytic wet air oxidation (CWAO) of phenol, thus arguing against a key role of single-atom catalysis in the latter case. A remarkable difference between these two reactions was also found in regard to catalyst stability. In the course of FAD, no changes in the support or supported species or reaction rate were observed even at a high temperature (150 °C). In CWAO, although 100% conversions were still achievable in repeated runs, the oxidizing environment caused partial destruction of N-CNTs and progressive deactivation of the Ru surface by carbonaceous deposits. These findings add important new knowledge about the properties and applicability of Ru@C nanosystems

Nitrogen Doped Carbon Nanotubes and Nanofibers for Green Hydrogen Production: Similarities in the Nature of Nitrogen Species, Metal–Nitrogen Interaction, and Catalytic Properties

The effect of nitrogen doped bamboo-like carbon nanotubes (N&ndash;CNTs) on the properties of supported platinum (0.2 and 1 wt %) catalysts in formic acid decomposition for hydrogen production was studied. It was shown that both impregnation and homogeneous precipitation routes led to the formation of electron-deficient platinum stabilized by pyridinic nitrogen sites of the N&ndash;CNTs. The electron-deficient platinum species strongly enhanced the activity and selectivity of the Pt/N&ndash;CNTs catalysts when compared to the catalysts containing mainly metallic platinum nanoparticles. A comparison of bamboo-like N&ndash;CNTs and herring-bone nitrogen doped carbon nanofibers (N&ndash;CNFs) as the catalyst support allowed us to conclude that the catalytic properties of supported platinum are determined by its locally one-type interaction with pyridinic nitrogen sites of the N&ndash;CNTs or N&ndash;CNFs irrespective of substantial structural differences between nanotubes and nanofibers

Pd-Ceria/CNMs Composites as Catalysts for CO and CH₄ Oxidation

The application of composite materials as catalysts for the oxidation of CO and other toxic compounds is a promising approach for air purification. In this work, the composites comprising palladium and ceria components supported on multiwall carbon nanotubes, carbon nanofibers and Sibunit were studied in the reactions of CO and CH4 oxidation. The instrumental methods showed that the defective sites of carbon nanomaterials (CNMs) successfully stabilize the deposited components in a highly-dispersed state: PdO and CeO2 nanoparticles, subnanosized PdOx and PdxCe1−xO2−δ clusters with an amorphous structure, as well as single Pd and Ce atoms, are formed. It was shown that the reactant activation process occurs on palladium species with the participation of oxygen from the ceria lattice. The presence of interblock contacts between PdO and CeO2 nanoparticles has an important effect on oxygen transfer, which consequently affects the catalytic activity. The morphological features of the CNMs, as well as the defect structure, have a strong influence on the particle size and mutual stabilization of the deposited PdO and CeO2 components. The optimal combination of highly dispersed PdOx and PdxCe1−xO2−δ species, as well as PdO nanoparticles in the CNTs-based catalyst, makes it highly effective in both studied oxidation reactions

Pd-Ce-Ox/MWCNTs and Pt-Ce-Ox/MWCNTs Composite Materials: Morphology, Microstructure, and Catalytic Properties

The composite nanomaterials based on noble metals, reducible oxides, and nanostructured carbon are considered to be perspective catalysts for many useful reactions. In the present work, multi-walled carbon nanotubes (MWCNTs) were used for the preparation of Pd-Ce-Ox/MWCNTs and Pt-Ce-Ox/MWCNTs catalysts comprising the active components (6 wt%Pd, 6 wt%Pt, 20 wt%CeO2) as highly dispersed nanoparticles, clusters, and single atoms. The application of X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) provided analysis of the samples&rsquo; morphology and structure at the atomic level. For Pd-Ce-Ox/MWCNTs samples, the formation of PdO nanoparticles with an average crystallite size of ~8 nm was shown. Pt-Ce-Ox/MWCNTs catalysts comprised single Pt2+ ions and PtOx clusters less than 1 nm. A comparison of the catalytic properties of the samples showed higher activity of Pd-based catalysts in CO and CH4 oxidation reactions in a low-temperature range (T50 = 100 &deg;C and T50 = 295 &deg;C, respectively). However, oxidative pretreatment of the samples resulted in a remarkable enhancement of CO oxidation activity of Pt-Ce-Ox/MWCNTs catalyst at T &lt; 20 &deg;C (33% of CO conversion at T = 0 &deg;C), while no changes were detected for the Pd-Ce-Ox/MWCNTs sample. The revealed catalytic effect was discussed in terms of the capability of the Pt-Ce-Ox/MWCNTs system to form unique PtOx clusters providing high catalytic activity in low-temperature CO oxidation