Microwave processing of vermiculite

Vermiculite is a clay mineral that is generally used for a wide range of applications such as in agricultural, horticultural and construction industries. This is due to its various properties which include high porosity, lightweight, thermo-insulating, non-toxic and good absorption capacity when exfoliated. The objective of this research was to critically evaluate the fundamental interaction of electromagnetic waves with vermiculite from different source locations and to understand the mechanism of exfoliation in an applied microwave field. When vermiculite minerals are placed under the influence of high electric fields, they expand due to the rapid heating of their interlayer water, which subsequently builds up pressure that pushes apart the silicate structure. The degree of exfoliation is directly related to the intensity of the applied electric field. The principal areas covered in this thesis include: a detailed review of the fundamentals of microwave processing and issues surrounding scale up; a critical literature review of vermiculite mineralogy, and previous methods of vermiculite processing and their limitations; understanding the interaction of microwave energy with vermiculite by carrying out mineralogical and dielectric characterisation; microwave exfoliation tests of vermiculite minerals from different source locations and a comparative energy and life cycle analysis of microwave and conventional exfoliation of vermiculite. A detailed review of the literature revealed that conventional exfoliation of vermiculite by gas or oil fuelled furnaces has significant limitations such as emissions of greenhouse gases, high-energy requirements (greater than 1 GJ/t), health and safety issues and poor process control. All work reported so far on microwave exfoliation of vermiculite has been limited to laboratory scale using domestic microwave ovens (2.45 GHz, power below 1200 W) and the route to scale up the process to industrial capacity has not given due consideration. Mineralogical characterisation of vermiculite from different geographical locations (Australia, Brazil, China and South Africa) revealed that only the sample from Brazil is a pure form of vermiculite while the other samples are predominantly hydrobiotite. All the samples have varying degrees of hydration with the Brazilian sample having the highest total water content. The presence of water in any form in a material influences its dielectric response and ultimately the microwave absorbing properties. The dielectric characterisation carried out on the different vermiculite samples shows that the vermiculite mineral structure is effectively transparent to microwave energy, but it is possible to selectively heat microwave absorber, which is the interlayer water in the vermiculite structure. The continuous microwave exfoliation tests carried out at both pilot scale at 53-126 kg/h and the scaled up system at 300-860 kg/h demonstrated that microwave energy can be used for the industrial exfoliation of vermiculite at high throughputs and is able to produce products below the specified product bulk densities standard required by The Vermiculite Association (TVA). The degree of vermiculite exfoliation depends on factors such as power density, feedstock throughput, energy input, interlayer water content, particle size of the feedstock, and vermiculite mineralogy. The highest degree of exfoliation was recorded for the Brazilian sample, which also had the highest water content. Life cycle analysis (LCA) frameworks by the International Organisation for Standardisation (The ISO 14040: principles and framework and ISO 14044: Requirements and guidelines) and British standards institution (PAS2050) were used to carry out comparative life cycle analysis of vermiculite exfoliation using microwave heating and conventional (industrial and Torbed) heating systems. The results showed that the microwave system potentially can give an energy saving of about 80 % and 75 % over industrial and Torbed Exfoliators respectively, and a carbon footprint saving potential of about 66 % and 65 %. It can be concluded that the reduced dust emission and noise from the microwave system would improve the working conditions, health and safety. Furthermore, the methodology discussed in this project can be used to understand the fundamental of microwave interaction with perlite and expanded clay, which are minerals with similar physical and chemical compositions as vermiculite

Microwave processing of vermiculite

Vermiculite is a clay mineral that is generally used for a wide range of applications such as in agricultural, horticultural and construction industries. This is due to its various properties which include high porosity, lightweight, thermo-insulating, non-toxic and good absorption capacity when exfoliated. The objective of this research was to critically evaluate the fundamental interaction of electromagnetic waves with vermiculite from different source locations and to understand the mechanism of exfoliation in an applied microwave field. When vermiculite minerals are placed under the influence of high electric fields, they expand due to the rapid heating of their interlayer water, which subsequently builds up pressure that pushes apart the silicate structure. The degree of exfoliation is directly related to the intensity of the applied electric field. The principal areas covered in this thesis include: a detailed review of the fundamentals of microwave processing and issues surrounding scale up; a critical literature review of vermiculite mineralogy, and previous methods of vermiculite processing and their limitations; understanding the interaction of microwave energy with vermiculite by carrying out mineralogical and dielectric characterisation; microwave exfoliation tests of vermiculite minerals from different source locations and a comparative energy and life cycle analysis of microwave and conventional exfoliation of vermiculite. A detailed review of the literature revealed that conventional exfoliation of vermiculite by gas or oil fuelled furnaces has significant limitations such as emissions of greenhouse gases, high-energy requirements (greater than 1 GJ/t), health and safety issues and poor process control. All work reported so far on microwave exfoliation of vermiculite has been limited to laboratory scale using domestic microwave ovens (2.45 GHz, power below 1200 W) and the route to scale up the process to industrial capacity has not given due consideration. Mineralogical characterisation of vermiculite from different geographical locations (Australia, Brazil, China and South Africa) revealed that only the sample from Brazil is a pure form of vermiculite while the other samples are predominantly hydrobiotite. All the samples have varying degrees of hydration with the Brazilian sample having the highest total water content. The presence of water in any form in a material influences its dielectric response and ultimately the microwave absorbing properties. The dielectric characterisation carried out on the different vermiculite samples shows that the vermiculite mineral structure is effectively transparent to microwave energy, but it is possible to selectively heat microwave absorber, which is the interlayer water in the vermiculite structure. The continuous microwave exfoliation tests carried out at both pilot scale at 53-126 kg/h and the scaled up system at 300-860 kg/h demonstrated that microwave energy can be used for the industrial exfoliation of vermiculite at high throughputs and is able to produce products below the specified product bulk densities standard required by The Vermiculite Association (TVA). The degree of vermiculite exfoliation depends on factors such as power density, feedstock throughput, energy input, interlayer water content, particle size of the feedstock, and vermiculite mineralogy. The highest degree of exfoliation was recorded for the Brazilian sample, which also had the highest water content. Life cycle analysis (LCA) frameworks by the International Organisation for Standardisation (The ISO 14040: principles and framework and ISO 14044: Requirements and guidelines) and British standards institution (PAS2050) were used to carry out comparative life cycle analysis of vermiculite exfoliation using microwave heating and conventional (industrial and Torbed) heating systems. The results showed that the microwave system potentially can give an energy saving of about 80 % and 75 % over industrial and Torbed Exfoliators respectively, and a carbon footprint saving potential of about 66 % and 65 %. It can be concluded that the reduced dust emission and noise from the microwave system would improve the working conditions, health and safety. Furthermore, the methodology discussed in this project can be used to understand the fundamental of microwave interaction with perlite and expanded clay, which are minerals with similar physical and chemical compositions as vermiculite

Improving the design of industrial microwave processing systems through prediction of the dielectric properties of complex multi-layered materials

Rigorous design of industrial microwave processing systems requires in-depth knowledge of the dielectric properties of the materials to be processed. These values are not easy to measure, particularly when a material is multi-layered containing multiple phases, when one phase has a much higher loss than the other and the application is based on selective heating. This paper demonstrates the ability of the Clausius-Mossotti (CM) model to predict the dielectric constant of multi-layered materials. Furthermore, mixing rules and graphical extrapolation techniques were used to further evidence our conclusions and to estimate the loss factor. The material used for this study was vermiculite, a layered alumina-silicate mineral containing up to 10 % of an interlayer hydrated phase. It was measured at different bulk densities at two distinct microwave frequencies, namely 934 and 2143 MHz. The CM model, based on the ionic polarisability of the bulk material, gives only a prediction of the dielectric constant for experimental data with a deviation of less than 5 % at microwave frequencies. The complex refractive index model (CRIM), Landau, Lifshitz and Loyenga (LLL), Goldschmidt, Böttcher and Bruggeman-Hanai model equations are then shown to give a strong estimation of both dielectric constant and loss factor of the solid material compared to that of the measured powder with a deviation of less than 1 %. Results obtained from this work provide a basis for the design of further electromagnetic processing systems for multi-layered materials consisting of both high loss and low loss components

Understanding the performance of a pilot vermiculite exfoliation system through process mineralogy

This paper reports on the application of process mineralogy to understand the experimental performance of a microwave based system for the exfoliation of vermiculite type minerals. When montmorillonite type clay structures are exposed to high intensity electric fields they expand very rapidly with the degree of expansion being directly related to the applied electric field strength. This basic understanding of the interaction of microwave fields with such materials has been used to develop a pilot scale microwave based process for the exfoliation of vermiculite. During commissioning of the system it was noted that vermiculites from different geographical sources behaved very differently in terms of the achieved expansion ratio. A systematic mineralogical evaluation of these different materials was carried out using Mineral Liberation Analysis (SEM/MLA), Thermo-gravimetric analysis and X-ray Diffraction (XRD) in order to determine the reasons for the variation in performance. Samples from vermiculite mines in Australia, Brazil, China and South Africa were studied. The mineralogy and mineral characteristics such as liberation, size and texture of the samples were quantified for each ore sample. The South African and Australian samples were found to be predominantly hydrated forms of mica. The Brazilian sample was predominantly composed of vermiculite while the Chinese sample was composed almost totally of hydrobiotite. The relationships between the form of hydration and degree of expansion were derived and it is shown that pure vermiculite exfoliates at lower field intensities than the other forms of hydrated mineral. The paper concludes with deductions obtained from the mineralogical assessments of the vermiculites, thereby elucidating the reasons for the performance observed for each feed material in the microwave exfoliation system