Generation of Electron Beam Plasma inside the Dielectric Tube

The results of experimental study of electron beam plasma inside the dielectric tube are presented. Beam plasma was generated by the fore-vacuum plasma electron source at (2-10) Pa in dc mode. It is shown, that the dependence of the plasma potential on gas pressure inside the tube is completely different in comparison with similar dependence without a tube. Monotonic dependence of the insulated beam col-lector potential in the tube on beam energy has two stages: slow and fast growth

Parameters of the beam plasma formed by a forevacuum plasma source of a ribbon beam in zero-field transportation system

We have studied the generation of the beam plasma formed by a forevacuum plasma source of a ribbon electron beam in the conditions of its transportation without an accompanying magnetic field. The ignition conditions in the beam transportation region of the beam–plasma discharge producing a plasma formation of the plasma sheet type with a plasma concentration of ~1016 m–3 and an electron temperature of 1–2.5 eV have been determined. The attained values of parameters and the sizes of the plasma formation make it possible to use it in technologies of the surface modification of planar extended articles

More on the Narrowing of Impact Broadened Radio Recombination Lines at High Principal Quantum Number

Recently Alexander and Gulyaev have suggested that the apparent decrease in impact broadening of radio recombination lines seen at high principal quantum number n may be a product of the data reduction process, possibly resulting from the presence of noise on the telescope spectra that is not present on the calculated comparison spectra. This is an interesting proposal. However, there are serious problems with their analysis that need to be pointed out. Perhaps the most important of these is the fact that for principal quantum numbers below n = 200, where the widths are not in question, their processed generated profile widths do not fit the widths of the processed lines obtained at the telescope. After processing, the halfwidths of the generated and telescope profiles must agree below n = 200 if we are to believe that the processed generated linewidths above n = 200 are meaningful. Theirs do not. Furthermore, we find that after applying the linewidth reduction factors found by Alexander and Gulyaev for their noise added profiles to our generated profiles to simulate their noise adding effect, the processed widths we obtain still do not come close to explaining the narrowing seen in the telescope lines for n values in the range 200 < n < 250. It is concluded that what is needed to solve this mystery is a completely new approach using a different observing technique instead of simply a further manipulation of the frequency-switched data.Comment: Six pages with 4 figures. Accepted for publication in Astrophysics and Space Scienc

X-ray spectroscopy of super-intense laser-produced plasmas for the study of nonlinear processes. Comparison with PIC simulations

We present X-ray spectroscopic diagnostics in femto-second laser-driven experiments revealing nonlinear phenomena caused by the strong coupling of the laser radiation with the created plasma. Among those nonlinear phenomena, we found the signatures of the Two Plasmon Decay (TPD) instability in a laser-driven CO2 cluster-based plasma by analyzing the Langmuir dips in the profile of the O VIII Lyϵ line, caused by the Langmuir waves created at the high laser intensity 3 1018Wcm-2. With similar laser intensities, we reveal also the nonlinear phenomenon of the Second Harmonic Generation (SHG) of the laser frequency by analyzing the nonlinear phenomenon of satellites of Lyman δ and ϵ lines of Ar XVII. In the case of relativistic laser-plasma interaction we discovered the Parametric Decay Instability (PDI)-induced ion acoustic turbulence produced simultaneously with Langmuir waves via irradiation of thin Si foils by laser intensities of 1021Wcm-2

Side extraction duoPIGatron-type ion source.

We have designed and constructed a compact duoPIGatron-type ion source, for possible use in ion implanters, in such the ion can be extracted from side aperture in contrast to conventional duoPIGatron sources with axial ion extraction. The size of the side extraction aperture is 1x40 mm. The ion source was developed to study physical and technological aspects relevant to an industrial ion source. The side extraction duoPIGatron has stable arc, uniformly bright illumination, and dense plasma. The present work describes some of preliminary operating parameters of the ion source using Argon, BF3. The total unanalyzed beam currents are 23 mA using Ar at an arc current 5 A and 13 mA using BF3 gas at an arc current 6 A

Immunodepletion in xenotransplantation

Xenograft transplantation is perhaps the most immunologically difficult problem in transplantation today. An overwhelming hyperacute rejection reaction (HAR) occurs within minutes of organ implantation. Preformed antibodies are thought to initiate this process. We used a pig-to-dog renal xenograft transplant model and investigated methods of decreasing the severity of hyperacute rejection. Female pigs weighing 15-20 kg were used as donors. Recipients were mongrel dogs weighing 15-25 kg. Experimental dogs were all given a number of treatments of IgG depletion using an antibody removal system (Dupont-Excorim). This machine immunoadsorbs plasma against a column containing immobilized staphylococcal protein A, which is known to bind the IgG Fc receptor. An 84% reduction in the IgG levels and a 71% reduction in IgM levels was achieved. Postoperative assessment was made of urine output, time to onset of HAR, and histopathological examination of the rejected kidneys. Although cross-matches between donor lymphocytes and recipient sera remained strongly positive in the treated dogs, there was a two- to fourfold reduction in the titers. The time to onset of HAR was prolonged in the experimental group, and the urine output was increased slightly. The histopathologic changes in the experimental group generally showed signs of HAR, but of less intensity than in the nonimmunodepleted control group. © 1990 Informa UK Ltd All rights reserved: reproduction in whole or part not permitted

New materials based on polylactide modified with silver and carbon ions

An integrated study of poly-L-lactide (PL) synthesis and the physicochemical properties of film surfaces, both modified by silver and carbon ion implantation and also unmodified PL surfaces, has been carried out. Surface modification was done using aMevva-5.Ru metal ion source with ion implantation doses of 1·1014, 1·1015 and 1·1016 ion/cm2. Material characterization was done using NMR, IRS, XPS and AFM. The molecular weight (MW), micro-hardness, surface resistivity, and limiting wetting angle of both un-implanted and implanted samples were measured. The results reveal that degradation of PL macromolecules occurs during ion implantation, followed by CO or CO2 removal and MW decrease. With increasing implantation dose, the glycerol wettability of the PL surface increases but the water affinity decreases (hydrophobic behavior). After silver and carbon ion implantation into the PL samples, the surface resistivity is reduced by several orders of magnitude and a tendency to micro-hardness reductionis induced