Prediction of the Optimal Reaction Temperature of the Riser of an Industrial Fluid Catalytic Cracking (FCC) Unit

A pseudo homogeneous two-dimensional (2D) model of an industrial Fluid Catalytic Cracking (FCC) riser is here presented. The FCC riser models of previous researchers were mostly based on the assumption of negligible mass transfer resistance and 1D plug flow. These assumptions undermine the accuracy of the models by over-predicting the optimum residence time of the riser. In this work the coke content of FCC catalyst was modeled as a function of the reactor temperature with the aim of predicting the operating conditions that will reduce coke on catalyst without undermining the yield of the key product (gasoline). Mass transfer resistance was incorporated in the reactor model to enhance the accuracy of the results. Catalyst deactivation was modeled based on the exponential decay function. The mass transfer coefficient and the catalyst effectiveness factor were estimated from empirical correlations obtained from literature. Data used for the simulation were sourced from an existing plant (KRPC) as well as from open literature. Finite difference numerical scheme was used to discretise the model governing equation. At the end of the investigation, three different operating temperature regimes were identified from the simulated results for the coking of FCC catalyst (low temperature, optimal temperature and high temperature regimes). An optimum operating temperature range of 786K-788K and an optimum catalyst-to-oil ratio (COR) range of 4.60-4.71 were predicted for the riser. Keywords: FCC; Finite difference, Mass transfer resistance, Catalyst deactivation, Riser models.

Effects of temperature in relation to sheet metal stamping

The demand to reduce the use of lubricants and increase tool life in sheet metal stamping has resulted in increased research on the sliding contact between the tool and the sheet materials. Unlubricated sliding wear tests for soft carbon steel sliding on D2 tool steel were performed using a pin-on-disk tribometer. The results revealed that temperature has an influencing role in the wear of tool steel and that material transfer between tool and sheet can be minimized at a certain temperature range in sheet metal stamping

Anti-motility and reductions in the concentrations of gut electrolytes: Mechanisms for the anti-spasmodic use of the seeds of avocado (Persea americana Mill) in folk medicine

The seeds of avocado (Persea americana Mill) are used in traditional medicine to treat, allay or prevent some spasm-related disorders, for instance, diarrhoea. The chloroform and methanol fractions of the chloroform-methanol extract of the seeds of P. americana were investigated for their qualitative and quantitative phytochemical constituents as well as effects on gastro-intestinal motility (transit) and castor oil-induced intestinal fluid sodium ion (Na+) and potassium ion (K+) concentrations in Wistar rats. The qualitative and quantitative phytochemical studies of the chloroform and methanol fractions showed the presence and amounts of alkaloids (2.92 ± 0.14 g/100 g and 2.81 ± 0.08 g/100 g respectively), flavonoids (3.43 ± 0.19 g/100 g and 3.11 ± 0.16 g/100 g, respectively), tannins (2.64 ± 0.13 g/100 g and 2.85 ± 0.14 g/100 g, respectively), steroids (1.51 ± 0.07 g/100 g and 1.27 ± 0.04 g/100 g, respectively), saponins (2.35 ± 0.08 % and 2.47 ± 0.09%, respectively), terpenoids, proteins and carbohydrates in both fractions. Fats and oil were present only in the chloroform fraction. At the two doses (100 and 200 mg/kg body weight), the chloroform and methanol fractions produced significant (p<0.05) and dose-related decreases in the gastro-intestinal motility and concentration of the intestinal fluid potassium ions but only the chloroform fraction at the dose of 200 mg/kg body weight significantly (p<0.05) decreased the concentration of the intestinal fluid sodium ions. Results of the fractions were comparable with those of the standard anti-diarrhoeal drug, hyoscine butylbromide (3 mg/kg body weight). The results indicate that the chloroform-methanol extract of the seeds of P. americana contains compounds with anti-spasmodic effect.Keywords: Persea americana, spasm-related, castor oil, gastro-intestinal motility and electrolytesAfrican Journal of Biotechnology Vol. 12(37), pp. 5610-561

Optimum design, socioenvironmental impact, and exergy analysis of a solar and rice husk-based off-grid hybrid renewable energy system

This study examines the optimal sizing of an off-grid hybrid system comprising solar photovoltaic (PV), rice husk-based biomass, and lead-acid battery for meeting the electric demand of a rural community. Considering a selected remote village in Bangladesh as a case study, the proposed optimized system is primarily compared with the diesel generator and the micro gas turbine (MGT)-based options in techno-economic and environmental terms. The potential social benefits, such as the employment creation and the improvement in the human development index in the locality, have been investigated in this study. Moreover, the impacts of operational greenhouse gas emissions on the human health damage and the surrounding ecosystem have been examined. Additionally, an exergy analysis of the hybrid system and the components has been carried out. Results indicate that in addition to being the environmentally preferable option, the proposed PV/biomass/battery system offers a lower cost of energy of 0.314 $/kWh compared to the MGT-based system (0.377$/kWh). Although the diesel-based system offers a marginally better economy (9.55% less energy cost), it comes with the expense of probable damages to human health and the ecosystem worth of $15,211 and$6,608, respectively, making biomass the best option with no such damages. Exergy analysis reveals higher loss from PV than biomass and 13.09% system exergy efficiency. The assessment of the social indicators testifies to the potential of promoting the human development index from its current value and the formation of 1.41 jobs to as high as 15.15 full-time permanent jobs with the installation of hybrid systems in the community

Synthesis and Performance Evaluation of Pulse Electrodeposited Ni-AlN Nanocomposite Coatings

This research work presents the microscopic analysis of pulse electrodeposited Ni-AlN nanocomposite coatings using SEM and AFM techniques and their performance evaluation (mechanical and electrochemical) by employing nanoindentation and electrochemical methods. The Ni-AlN nanocomposite coatings were developed by pulse electrodeposition. The nickel matrix was reinforced with various amounts of AlN nanoparticles (3, 6, and 9 g/L) to develop Ni-AlN nanocomposite coatings. The effect of reinforcement concentration on structure, surface morphology, and mechanical and anticorrosion properties was studied. SEM and AFM analyses indicate that Ni-AlN nanocomposite coatings have dense, homogenous, and well-defined pyramid structure containing uniformly distributed AlN particles. A decent improvement in the corrosion protection performance is also observed by the addition of AlN particles to the nickel matrix. Corrosion current was reduced from 2.15 to 1.29 μA cm−2 by increasing the AlN particles concentration from 3 to 9 g/L. It has been observed that the properties of Ni-AlN nanocomposite coating are sensitive to the concentration of AlN nanoparticles used as reinforcement

Quality of anti-malarial drugs provided by public and private healthcare providers in south-east Nigeria

BACKGROUND: There is little existing knowledge about actual quality of drugs provided by different providers in Nigeria and in many sub-Saharan African countries. Such information is important for improving malaria treatment that will help in the development and implementation of actions designed to improve the quality of treatment. The objective of the study was to determine the quality of drugs used for the treatment of malaria in a broad spectrum of public and private healthcare providers. METHODS: The study was undertaken in six towns (three urban and three rural) in Anambra state, south-east Nigeria. Anti-malarials (225 samples), which included artesunate, dihydroartemisinin, sulphadoxine-pyrimethamine (SP), quinine, and chloroquine, were either purchased or collected from randomly selected providers. The quality of these drugs was assessed by laboratory analysis of the dissolution profile using published pharmacopoeial monograms and measuring the amount of active ingredient using high performance liquid chromatography (HPLC). FINDINGS: It was found that 60 (37%) of the anti-malarials tested did not meet the United States Pharmacopoeia (USP) specifications for the amount of active ingredients, with the suspect drugs either lacking the active ingredients or containing suboptimal quantities of the active ingredients. Quinine (46%) and SP formulations (39%) were among drugs that did not satisfy the tolerance limits published in USP monograms. A total of 78% of the suspect drugs were from private facilities, mostly low-level providers, such as patent medicine dealers (vendors). CONCLUSION: This study found that there was a high prevalence of poor quality drugs. The findings provide areas for public intervention to improve the quality of malaria treatment services. There should be enforced checks and regulation of drug supply management as well as stiffer penalties for people stocking substandard and counterfeit drugs

Electrospun highly corrosion-resistant polystyrene–nickel oxide superhydrophobic nanocomposite coating

A key challenge in producing superhydrophobic coatings (SHC) is to tailor the surface morphology on the micro-nanometer scale. In this work, a feasible and straightforward route was employed to manufacture polystyrene/nickel oxide (PSN) nanocomposite superhydrophobic coatings on aluminum alloys to mitigate their corrosion in a saline environment. Different techniques were employed to explore the influence of the addition of NiO nanoparticles to the as-prepared coatings. PSN-2 composite with ~ 4.3 wt% of NiO exhibited the highest water contact angle (WCA) of 155° ± 2 and contact angle hysteresis (CAH) of 5°. Graphic abstract: EIS Nyquist plots of 3 g of electrospun polystyrene coatings (a) without and with (b) 0.1, (c) 0.15, and (d) 0.2 g of NiO. [Figure not available: see fulltext.

Enhancement of mechanical and corrosion resistance properties of electrodeposited Ni–P–TiC composite coatings

In the present study, the effect of concentration of titanium carbide (TiC) particles on the structural, mechanical, and electrochemical properties of Ni–P composite coatings was investigated. Various amounts of TiC particles (0, 0.5, 1.0, 1.5, and 2.0 g L−1) were co-electrodeposited in the Ni–P matrix under optimized conditions and then characterized by employing various techniques. The structural analysis of prepared coatings indicates uniform, compact, and nodular structured coatings without any noticeable defects. Vickers microhardness and nanoindentation results demonstrate the increase in the hardness with an increasing amount of TiC particles attaining its terminal value (593HV100) at the concentration of 1.5 g L−1. Further increase in the concentration of TiC particles results in a decrease in hardness, which can be ascribed to their accumulation in the Ni–P matrix. The electrochemical results indicate the improvement in corrosion protection efficiency of coatings with an increasing amount of TiC particles reaching to ~ 92% at 2.0 g L−1, which can be ascribed to a reduction in the active area of the Ni–P matrix by the presence of inactive ceramic particles. The favorable structural, mechanical, and corrosion protection characteristics of Ni–P–TiC composite coatings suggest their potential applications in many industrial applications

Theoretical and experimental insights into the C-steel aqueous corrosion inhibition at elevated temperatures in 1.0M HCl via multi-carbonyl Gemini cationic surfactants

Despite corrosion being an inevitable process, researchers strive to control corrosion. In this study, our goal was to prepare two amido Gemini cationic surfactants, LAPG and MAPG, each with different alkyl chains and multiple carbonyl groups as rich electronic rich centers. We aimed to evaluate these surfactants as potential corrosion inhibitors for carbon steel (CS) in 1M HCl at temperatures of 25-55 ± 0.1°C. In theoretical investigations, DFT parameters and Mont Carlo simulation were run to predict the adsorption affinity and reactive sites of the LAPG and MAPG molecules. Their efficacy was investigated experimentally considering weight loss and electrochemical techniques. The Tafel polarization revealed that at 0.1mM of LAPG and MAPG, the corrosion current density (i corr) of CS was reduced to the lowest extent (75.56 and 53.82μAcm-2) compared to 529.3μAcm-2 in the absence of the inhibitors. EIS data suggests the enhancement of the thickness of the adsorbed layers of the studied compounds from the decrease of the double-layer capacitance C dl values. The Langmuir isotherm explained the adoption phenomena of these compounds at 25-55 ± 0.1°C. Activation and adsorption thermodynamic parameters predicted the chemisorption behavior of these molecules onto the steel surface. AFM and XPS tools confirm the CS surface protection due to these inhibitors' adsorbed layer. A parallel study showed the superiority of these corrosion inhibitors in HCl compared with those reported earlier, making these compounds highly promising corrosion inhibitors, especially in high-temperature acidic environments