5,244 research outputs found
Tunable Functionality and toxicity studies of Titanium Dioxide Nanotube Layers
In this work, we have developed economic process to elaborate scalable
titanium dioxide nanotube layers which show a tunable functionality. The
titanium dioxide nanotube layers was prepared by electrochemical anodization of
Ti foil in 0.4 wt% hydrofluoric acid solution. The nanotube layers structure
and morphology were characterized using x-ray diffraction and scanning electron
microscopy. The surface topography and wettability was studied according to the
anodization time. The sample synthesized while the current density reached a
local minimum displayed higher contact angle. Beyond this point, the contact
angles decrease with the anodization time. Photo-degradation of acid orange 7
in aqueous solution was used as a probe to assess the photo-catalytic activity
of titanium dioxide nanotube layers under UV irradiation. We obtained better
photocatalitic activity for the sample elaborate at higher current density.
Finally we use the Ciliated Protozoan T. pyriformis, an alternative cell model
used for in vitro toxicity studies, to predict the toxicity of titanium dioxide
nanotube layers in biological system. We did not observe any characteristic
effect in the presence of the titanium dioxide nanotube layers on two
physiological parameters related to this organism, non-specific esterases
activity and population growth rate
Demonstration of nanoimprinted hyperlens array for high-throughput sub-diffraction imaging
11124Nsciescopu
Systems Approach and Quantitative Decision Tools for Technology Selection in Environmentally Friendly Drilling
One of the petroleum industry?s goals is to reduce the environmental impact of oil and gas operations in environmentally sensitive areas. To achieve this, a number of Environmentally Friendly Drilling (EFD) technologies have been developed to varying degrees. For example, the use of an elevated platform as an alternative to the gravel pad is less intrusive and leads to a more environmentally friendly approach to drilling operations. Elevated drilling platforms will require the use of piles. Another alternative to the gravel pad is the use of composite mats. Since the demand of low impact technologies for drill site construction has rapidly increased, the parametric study for the feasibility of using pile foundations and composite mats is conducted in this research.
Even though a number of EFD technologies have already been developed to varying degrees, few have been integrated into a field demonstrable drilling system (i.e., combination of technologies) compatible with ecologically sensitive areas. In general, it is difficult to select the best combination of EFD technologies for a given site because there are many possible combinations and many different evaluation criteria. The proposed technology evaluation method is based on a systems analysis that can be used for integrating current and new EFD technologies into an optimal EFD system. An optimization scheme is suggested based on a combination of multi-attribute utility theory and exhaustively enumerating all possible technology combinations to provide a quantitative rationale and suggest the best set of systems according to a set of criteria, with the relative importance of the different criteria defined by the decision-maker. In this research, the sensitivity of the optimal solution to the weight factors and the effects of the uncertainty of input scores are also discussed using a case study.
An application of the proposed approach is described by conducting a case study in Green Lake at McFaddin, TX. The main purpose of this case study is to test the proposed technology evaluation protocol in a real site and then to refine the protocol. This research describes the results of the case study which provided a more logical and comprehensive approach that maximized the economic and environmental goals of both the landowner and the oil company leaseholder
20 K superconductivity in heavily electron doped surface layer of FeSe bulk crystal
A superconducting transition temperature Tc as high as 100 K was recently
discovered in 1 monolayer (1ML) FeSe grown on SrTiO3 (STO). The discovery
immediately ignited efforts to identify the mechanism for the dramatically
enhanced Tc from its bulk value of 7 K. Currently, there are two main views on
the origin of the enhanced Tc; in the first view, the enhancement comes from an
interfacial effect while in the other it is from excess electrons with strong
correlation strength. The issue is controversial and there are evidences that
support each view. Finding the origin of the Tc enhancement could be the key to
achieving even higher Tc and to identifying the microscopic mechanism for the
superconductivity in iron-based materials. Here, we report the observation of
20 K superconductivity in the electron doped surface layer of FeSe. The
electronic state of the surface layer possesses all the key spectroscopic
aspects of the 1ML FeSe on STO. Without any interface effect, the surface layer
state is found to have a moderate Tc of 20 K with a smaller gap opening of 4
meV. Our results clearly show that excess electrons with strong correlation
strength alone cannot induce the maximum Tc, which in turn strongly suggests
need for an interfacial effect to reach the enhanced Tc found in 1ML FeSe/STO.Comment: 5 pages, 4 figure
Insights into the subsurface transport of As(V) and Se(VI) in produced water from hydraulic fracturing using soil samples from Qingshankou Formation, Songliao Basin, China.
Produced water is a type of wastewater generated from hydraulic fracturing, which may pose a risk to the environment and humans due to its high ionic strength and the presence of elevated concentrations of metals/metalloids that exceed maximum contamination levels. The mobilization of As(V) and Se(VI) in produced water and selected soils from Qingshankou Formation in the Songliao Basin in China were investigated using column experiments and synthetic produced water whose quality was representative of waters arising at different times after well creation. Temporal effects of produced water on metal/metalloid transport and sorption/desorption were investigated by using HYDRUS-1D transport modelling. Rapid breakthrough and long tailings of As(V) and Se(VI) transport were observed in Day 1 and Day 14 solutions, but were reduced in Day 90 solution probably due to the elevated ionic strength. The influence of produced water on the hydrogeological conditions (i.e., change between equilibrium and non-equilibrium transport) was evidenced by the change of tracer breakthrough curves before and after the leaching of produced water. This possibly resulted from the sorption of polyacrylamide (PAM (-CH2CHCONH2-)n) onto soil surfaces, through its use as a friction reducer in fracturing solutions. The sorption was found to be reversible in this study. Minimal amounts of sorbed As(V) were desorbed whereas the majority of sorbed Se(VI) was readily leached out, to an extent which varied with the composition of the produced water. These results showed that the mobilization of As(V) and Se(VI) in soil largely depended on the solution pH and ionic strength. Understanding the differences in metal/metalloid transport in produced water is important for proper risk management
Effects of biochar and polyacrylamide on decomposition of soil organic matter and <sup>14</sup>C-labeled alfalfa residues
© 2016, Springer-Verlag Berlin Heidelberg.Purpose: Various soil conditioners, such as biochar (BC) and anionic polyacrylamide (PAM), improve soil fertility and susceptibility to erosion, and may alter microbial accessibility and decomposition of soil organic matter (SOM) and plant residues. To date, no attempts have been made to study the effects of BC in combination with PAM on the decomposition of soil SOM and plant residues. The objective of this study was to evaluate the effects of BC, PAM, and their combination on the decomposition of SOM and alfalfa residues. Materials and methods: An 80-day incubation experiment was carried out to investigate the effects of oak wood biochar (BC; 10 Mg ha−1), PAM (80 kg ha−1), and their combination (BC + PAM) on decomposition of SOM and 14C-labeled alfalfa (Medicago sativa L.) residues by measuring CO2 efflux, microbial biomass, and specific respiration activity. Results and discussion: No conditioner exerted a significant effect on SOM decomposition over the 80 days of incubation. PAM increased cumulative CO2 efflux at 55–80 days of incubation on average of 6.7 % compared to the soil with plant residue. This was confirmed by the increased MBN and MB14C at 80 days of incubation in PAM-treated soil with plant residue compared to the control. In contrast, BC and BC + PAM decreased plant residue decomposition compared to that in PAM-treated soil and the respective control soil during the 80 days. BC and BC + PAM decreased MBC in soil at 2 days of incubation indicated that BC suppressed soil microorganisms and, therefore, decreased the decomposition of plant residue. Conclusions: The addition of oak wood BC alone or in combination with PAM to soil decreased the decomposition of plant residue
- …