3,469 research outputs found
Centaur AC-8 Postflight Guidance Analysis
Centaur AC-8 postflight guidance and control analysi
Hilbert number for a family of piecewise nonautonomous equations
For family , we
solve three basic problems related with its dynamics. First, we characterize
when it has a center (Poincar\'e center focus problem). Second, we show that
each equation has a finite number of limit cycles (finiteness problem), and
finally we give a uniform upper bound for the number of limit cycles (Hilbert's
16th problem).Comment: 16 pages, no figure
3D Visual Information for Dynamic Objects Detection and Tracking During Mobile Robot Navigation
USE OF SYNTHETIC TANINES DURING THE SKIN CURTITION PROCESS OF Cavia porcellus (CUY) IN FINE PELETERY
The Cavia porcellus skin (Cuy), after receiving a tanning process, using synthetic tannins, becomes a high quality leather, very suitable in the articles manufacture of high quality. Its main objective was the evaluation of different levels of synthetic tannin (6, 7, 8%) during the tanning process of guinea pig skins with hair; using 48 skins, with an average mass of 200 g each. The experimental units modeled with a Completely Random Design (DCA. Once the experimental phase was completed, it observed that the most skin tanning suitable level the guinea pig (retaining hair) is 6 % of synthetic tanning agent; it´s supported by the excellent results the tests performed. The physical resistance evaluation determined that the best tensile strength (1945.75 N/cm2) it´s reached whit 6 % of synthetic tannin and the best percentage of elongation (89.69 %) achieved with the use of 7 % of tannin (which fully meet the requirements quality the Spanish Leather Association). The most efficient sensorial characteristics obtained with 6 % of tannin: fullness 4.88; softness 4.63 and roundness 4.75 points, respectively; producing a very soft, flexible skin and above all with the fullness suitable for the fine articles manufacture.
Keywords: tanning, skins, guinea pig, synthetic tannins.
Resumen
La piel del Cavia porcellus (Cuy), después de curtida, empleando taninos sintéticos, se convierte en un cuero de alta calidad, muy adecuado en la peletería fina. Esta investigación tuvo por objetivo fundamental la evaluación de diferentes niveles de tanino sintético (6, 7, 8 %) durante el proceso de curtición de pieles de cuyes con pelo; utilizando para ello un total de 48 pieles, con una masa promedio de 200 g cada una. Las unidades experimentales fueron modeladas con un Diseño Completamente al Azar (DCA). Una vez culminada la fase experimental, se pudo constatar que el nivel más adecuado para la curtición de la piel de cuy (conservando el pelo) es del 6 % de curtiente sintético; lo cual quedó avalado por los excelentes resultados de las pruebas practicadas. La evaluación de las resistencias físicas determinó que la mejor resistencia a la tensión (1945,75 N/cm2) se alcanzó al curtir con 6 % de tanino sintético, y el mejor porcentaje de elongación (89,69 %), se logró con la utilización de 7 % de tanino (que satisfacen completamente con las exigencias de calidad de la Asociación Española del Cuero). Las características sensoriales más eficientes fueron logradas al curtir las pieles con 6 % de tanino: llenura 4,88; blandura 4,63 y redondez 4,75 puntos, respectivamente; produciéndose una piel muy suave, flexible y sobre todo con la llenura adecuada para la confección de artículos de peletería fina.
Palabras Clave: Clave: curtición, pieles, cuy, taninos sintéticos
Effect of organic loading rate on the production of Polyhydroxyalkanoates from sewage sludge
The aim of this work was to study the effect of organic loading rate on the production of Polyhydroxyalkanoates (PHA) from sewage sludge. Synthesis of PHA using sewage sludge as platform was achieved in this work. Three pilot-scale selection-sequencing batch reactors (S-SBR) were used for obtaining a culture able to accumulate PHA following a strategy of aerobic dynamic feeding (ADF) at different volumetric organic-loading-rate (vOLR): 1.3, 1.8 and 0.8 g COD L-1 d-1 for S-SBR 1, S-SBR 2 and S-SBR 3, respectively. Decreasing the vOLR enhanced the general performance of the process as for organic matter removal (from 99.2% ± 0.3% in S-SBR-3 to 92 ± 2 in S-SBR-2) while the opposite trend was recorded for PHA production (6.0 PHA % w/w in S-SBR-3 vs 13.7 PHA % w/w in S-SBR-2 at the end of the feast phase). Furthermore, indirect and direct emissions, as N2O, were evaluated during the process for the first time. Finally, three accumulation tests were performed achieving 24% w/w
Phonon assisted dynamical Coulomb blockade in a thin suspended graphite sheet
The differential conductance in a suspended few layered graphene sample is
fou nd to exhibit a series of quasi-periodic sharp dips as a function of bias
at l ow temperature. We show that they can be understood within a simple model
of dyn amical Coulomb blockade where energy exchanges take place between the
charge carriers transmitted trough the sample and a dissipative electromagnetic
envir onment with a resonant phonon mode strongly coupled to the electrons
A numerical study of the development of bulk scale-free structures upon growth of self-affine aggregates
During the last decade, self-affine geometrical properties of many growing
aggregates, originated in a wide variety of processes, have been well
characterized. However, little progress has been achieved in the search of a
unified description of the underlying dynamics. Extensive numerical evidence
has been given showing that the bulk of aggregates formed upon ballistic
aggregation and random deposition with surface relaxation processes can be
broken down into a set of infinite scale invariant structures called "trees".
These two types of aggregates have been selected because it has been
established that they belong to different universality classes: those of
Kardar-Parisi-Zhang and Edward-Wilkinson, respectively. Exponents describing
the spatial and temporal scale invariance of the trees can be related to the
classical exponents describing the self-affine nature of the growing interface.
Furthermore, those exponents allows us to distinguish either the compact or
non-compact nature of the growing trees. Therefore, the measurement of the
statistic of the process of growing trees may become a useful experimental
technique for the evaluation of the self-affine properties of some aggregates.Comment: 19 pages, 5 figures, accepted for publication in Phys.Rev.
Extended States in a One-dimensional Generalized Dimer Model
The transmission coefficient for a one dimensional system is given in terms
of Chebyshev polynomials using the tight-binding model. This result is applied
to a system composed of two impurities located between sites of a host
lattice. It is found that the system has extended states for several values of
the energy. Analytical expressions are given for the impurity site energy in
terms of the electron's energy. The number of resonant states grows like the
number of host sites between the impurities. This property makes the system
interesting since it is a simple task to design a configuration with resonant
energy very close to the Fermi level .Comment: 4 pages, 3 figure
Size of the Vela Pulsar's Radio Emission Region: 500 km
We use interstellar scattering of the Vela pulsar to determine the size of
its emission region. From interferometric phase variations on short baselines,
we find that radio-wave scattering broadens the source by 3.4+/-0.3
milliarcseconds along the major axis at position angle 81+/-3 degrees. The
ratio of minor axis to major axis is 0.51+/-0.03. Comparison of angular and
temporal broadening indicates that the scattering material lies in the Vela-X
supernova remnant surrounding the pulsar. From the modulation of the pulsar's
scintillation on very short baselines, we infer a size of 500 km for the
pulsar's emission region. We suggest that radio-wave refraction within the
pulsar's magnetosphere may plausibly explain this size.Comment: 14 pages, includes 2 figures. Also available at:
http://charm.physics.ucsb.edu:80/people/cgwinn/cgwinn_group/cgwinn_group.htm
- …