Radioactive nondestructive test method

Various radioisotope techniques were used as diagnostic tools for determining the performance of spacecraft propulsion feed system elements. Applications were studied in four tasks. The first two required experimental testing involving the propellant liquid oxygen difluoride (OF2): the neutron activation analysis of dissolved or suspended metals, and the use of radioactive tracers to evaluate the probability of constrictions in passive components (orifices and filters) becoming clogged by matter dissolved or suspended in the OF2. The other tasks were an appraisal of the applicability of radioisotope techniques to problems arising from the exposure of components to liquid/gas combinations, and an assessment of the applicability of the techniques to other propellants

Red and near-infrared spectral reflectance of snow

The spectral reflectance of snow in the range of 0.60 to 2.50 microns wavelengths was studied in a cold laboratory using natural snow and simulated preparations of snow. A white barium sulfate powder was used as the standard for comparison. The high reflectance (usually nearly 100%) of fresh natural snow in visible wavelengths declines rapidly at wavelengths longer than the visible, as the spectral absorption coefficients of ice increase. Aging snow becomes only somewhat less reflective than fresh snow in the visible region and usually retains a reflectance greater than 80%. In the near infrared, aging snow tends to become considerably less reflective than fresh snow

The Extrema-effect in Total Elastic Molecular Beam Scattering Cross Sections for Characterization of the Potential Well

Extrema effect in total elastic molecular beam scattering cross sections for characterization of potential wel

Variable mixture ratio performance through nitrogen augmentation

High/variable mixture ratio O2/H2 candidate engine cycles are examined for earth-to-orbit vehicle application. Engine performance and power balance information are presented for the candidate cycles relative to chamber pressure, bulk density, and mixture ratio. Included in the cycle screening are concepts where a third fluid (liquid nitrogen) is used to achieve a variable mixture ratio over the trajectory from liftoff to earth orbit. The third fluid cycles offer a very low risk, fully reusable, low operation cost alternative to high/variable mixture ratio bipropellant cycles. Variable mixture ratio engines with extendible nozzle are slightly lower performing than a single mixture ratio engine (MR = 7:1) with extendible nozzle. Dual expander engines (MR = 7:1) have slightly better performance than the single mixture ratio engine. Dual fuel dual expander engines offer a 16 percent improvement over the single mixture ratio engine

Microlaminate composites: An alternate approach to thermal barrier coatings

Ceramic thermal barrier coatings suffer from a major drawback, i.e., brittle behavior. An alternate approach is microlaminate composite coatings consisting of alternate layers of metal and oxide. As the thickness of the individual laminae decrease while keeping the total thickness of the coating constant, the thermal conductivity drops markedly. Data on the Fe-Cu system will be presented. A model is proposed for an MCrAlY-Al2O3 microlaminate coating for thermal barriers. The methods of fabrication will also be discussed

LANDSAT follow-on: A report by the applications survey groups. Volume 1: Executive summary

Attempts at operational usage of the LANDSAT imagery by non NASA users are studied with particular emphasis on profitable use of the imagery, as contrasted with investigations concerned with research and development of a technology. An evaluation is given of the functional capabilities of the LANDSAT follow-on and ground systems designs in terms of user requirements and desiderata for data measurements, products, and parameters. Applications survey groups (ASGs) were formed for mineral and petroleum exploration, inland water resources, land inventory, and agriculture. The members were drawn from all segments of the user community: Federal agencies, state and local governments or agencies (or from associations of such constituencies), industry and universities. They were selected so that in aggregate they would be able to adequately assess the state-of-the-art in their technical areas and represent this in the ASG deliberations

Individual differences in human annoyance response to noise

Individual variations in annoyance and in susceptibility to noise were studied to establish a finer definition of the ingredients of the human annoyance response. The study involved interactions among a heterogeneous sample of human subjects, various noise stimuli, and different physical environments of exposure. Significant differences in annoyance ratings among the six noise stimuli, all equated for peak sound pressure level, were found

Application of pattern recognition techniques to the identification of aerospace acoustic sources

A pattern recognition system was developed that successfully recognizes simulated spectra of five different types of transportation noise sources. The system generates hyperplanes during a training stage to separate the classes and correctly classify unknown patterns in classification mode. A feature selector in the system reduces a large number of features to a smaller optimal set, maximizing performance and minimizing computation

Carboranylcyclotriphosphazenes and their polymers

Carboranyl-substituted polyphosphazenes are prepared by heat polymerizing a carboranyl halocyclophosphazene at 250 C for about 120 hours in the absence of oxygen and moisture. The cyclophosphazene is obtained by allowing a lithium carborane, e.g., the reaction product of methyl-o-carborane with n-butyllithium in ethyl ether, to react with e.g., hexachlorocyclotriphosphazene at ambient temperatures and in anhydrous conditions. For greater stability in the presence of moisture, the chlorine substituents of the polymer are then replaced by aryloxy or alkoxy groups, such as CF3CH2O. The new substantially inorganic polymers are thermally stable materials which produce a high char yield when exposed to extreme temperatures, and can thus serve to insulate less heat and fire resistant substances

Tropospheric HO2 determination by FAGE

The detection efficiency is greatest at low pressures, where the subsequent removal of the HO product by the NO reagent (via HO + NO + M yields HONO + M) is relatively slow. Moreover, nozzle expansion of the air from ambient to low pressures produces a turbulent zone that assists in mixing the reagent with the sample. If the HO product is observed by laser-excited fluorescence, then the other advantages of low-pressure detection by FAGE (Fluorescence Assay with Gas Expansion) also apply. The FAGE instrumental response was calibrated to external HO2 by observing NO decay in the photolysis of HO-CH2O mixtures and by choosing conditions in which HO2 + NO is the only significant NO destruction path. HO2 was determined in urban air