8,967 research outputs found
Optimal design of pipes in series: An explicit approximation
This paper introduces a new methodology for the optimum design of pipes in series, named Optimum Hydraulic Grade Line (OHGL). This methodology is explicit and is based on the knowledge of the series topology and the geometrical distribution of water demands on nodes, i.e. the way in which the pipe in series delivers water mass as function of the distance from the entrance. OHGL consists in the pre-determination of that hydraulic grade line which gives the minimum construction cost, in an explicit way. Once this line has been established, calculation of the pipe’s continuous diameters is direct; after a round up to commercial diameters is developed. To validate the proposed methodology, several pipes in series were designed both using GA and OHGL. Four hundred series were used in total, each with different topological characteristics and demands. Keywords: Pipe in series, optimum design, genetic algorithms, optimum hydraulic grade line
Z' boson detection in the Minimal Quiver Standard Model
We undertake a phenomenological study of the extra neutral Z' boson in the
Minimal Quiver Standard Model and discuss limits on the model's parameters from
previous precision electroweak experiments, as well as detection prospects at
the Large Hadron Collider at CERN. We find that masses lower than around 700
GeV are excluded by the -pole data from the CERN-LEP collider, and below 620
GeV by experimental data from di-electron events at the Fermilab-Tevatron
collider. We also find that at a mass of 1 TeV the LHC cross section would show
a small peak in the di-lepton and top pair channel.Comment: 15 pages, 5 figures. v2: substantial revisions and improvements,
final version accepted for publicatio
Singularity-sensitive gauge-based radar rainfall adjustment methods for urban hydrological applications
Gauge-based radar rainfall adjustment techniques have been widely used to improve the applicability of radar rainfall estimates to large-scale hydrological modelling. However, their use for urban hydrological applications is limited as they were mostly developed based upon Gaussian approximations and therefore tend to smooth off so-called "singularities" (features of a non-Gaussian field) that can be observed in the fine-scale rainfall structure. Overlooking the singularities could be critical, given that their distribution is highly consistent with that of local extreme magnitudes. This deficiency may cause large errors in the subsequent urban hydrological modelling. To address this limitation and improve the applicability of adjustment techniques at urban scales, a method is proposed herein which incorporates a local singularity analysis into existing adjustment techniques and allows the preservation of the singularity structures throughout the adjustment process. In this paper the proposed singularity analysis is incorporated into the Bayesian merging technique and the performance of the resulting singularity-sensitive method is compared with that of the original Bayesian (non singularity-sensitive) technique and the commonly used mean field bias adjustment. This test is conducted using as case study four storm events observed in the Portobello catchment (53 km2) (Edinburgh, UK) during 2011 and for which radar estimates, dense rain gauge and sewer flow records, as well as a recently calibrated urban drainage model were available. The results suggest that, in general, the proposed singularity-sensitive method can effectively preserve the non-normality in local rainfall structure, while retaining the ability of the original adjustment techniques to generate nearly unbiased estimates. Moreover, the ability of the singularity-sensitive technique to preserve the non-normality in rainfall estimates often leads to better reproduction of the urban drainage system's dynamics, particularly of peak runoff flows
Diphoton decay for a 750 GeV scalar boson in a model
We propose a new GUT model free from anomalies, with
a 750 GeV scalar candidate which can decay into two photons, compatible with
the recent diphoton signal reported by ATLAS and CMS collaborations. This model
gives masses to all fermions and may explain the 750GeV signal through one loop
decays to with charged vector and charged Higgs bosons, as well
as up- and electron-like exotic particles that arise naturally from the
condition of cancellation of anomalies of the group. We
obtain, for different width approximations, allowed mass regions from 900 GeV
to 3 TeV for the exotic up-like quark, in agreement with ATLAS and CMS
collaborations data.Comment: 4 figures, discussion extended, 1 new figur
On the possibility of calibrating urban storm-water drainage models using gauge-based adjusted radar rainfall estimates
Traditionally, urban storm water drainage models have been calibrated using only raingauge data, which may result in overly conservative models due to the lack of spatial description of rainfall. With the advent of weather radars, radar rainfall estimates with higher temporal and spatial resolution have become increasingly available and have started to be used operationally for urban storm water model calibration and real time operation. Nonetheless, the insufficient accuracy of radar rainfall estimates has proven problematic and has hindered its widespread practical use. This work explores the possibility of improving the applicability of radar rainfall estimates to the calibration of urban storm-water drainage models by employing gauge-based radar rainfall adjustment techniques. Four different types of rainfall estimates were used as input to the recently verified urban storm water drainage models of the Beddington catchment in South London; these included: raingauge, block-kriged raingauge, radar (UK Met Office Nimrod) and the adjusted (or merged) radar rainfall estimates. The performance of the simulated flow and water depths was assessed using measurements from 78 gauges. Results suggest that a better calibration could be achieved by using the block-kriged raingauge and the adjusted radar estimates as input, as compared to using only radar or raingauge estimates
Family Dependence in SU(3)_C X SU(3)_L X U(1)_X models
Using experimental results at the Z-pole and atomic parity violation, we
perform a chi-squared fit at 95% CL to obtain family-dependent bounds to Z_2
mass and Z-Z' mixing angle in the framework of SU(3)_C X SU(3)_L X U(1)_X
models. The allowed regions depend on the assignment of the quark families in
mass eigenstates into the three different families in weak eigenstates that
cancel anomaliesComment: 14 pages, 2 figures, LaTeX2e; added references, added equations with
electroweak corrections for section 4. Version to appear in Phys. Rev.
Towards an ecological index for tropical soil quality based on soil macrofauna
The objective of this work was to construct a simple index based on the presence/absence of different groups of soil macrofauna to determine the ecological quality of soils. The index was tested with data from 20 sites in South and Central Tabasco, Mexico, and a positive relation between the model and the field observations was detected. The index showed that diverse agroforestry systems had the highest soil quality index (1.00), and monocrops without trees, such as pineapple, showed the lowest soil quality index (0.08). Further research is required to improve this model for natural systems that have very low earthworm biomass
- …