952 research outputs found
Microbial Population Optimization for Control and Improvement of Dark Hydrogen Fermentation
Dark hydrogen fermentation (DHF) is a process that can achieve two simultaneous objectives: the production of bioenergy and reduction of pollution. Complex microbiological communities containing efficient producers of hydrogen usually carry out the process. Ordinarily, control and operation strategies optimized the process by chemical and physical factors that usually provide only short‐term solutions and adverse effects on microbial properties. Microbial population optimization methods are designed to overcome these problems using knowledge on microbiological aspects, especially regarding optimizing microbial community structure and property. Optimizing microbial community structure and property should be an explicit aim for the (i) design and operation of reactors for DHF process, (ii) creating conditions that select for the stable and productive growth of desired microbes, and (iii) preventing or limiting growth of organisms that would be reducing hydrogen yields. Microbial population optimization could be managed by biostimulization by adding nutrient species specific for their community, bioaugmentation by adding dominant species or efficient hydrogen‐producing bacteria into the system, and online process control for maintaining their community
Biogas Production from Biomass Residues of Palm Oil Mill by Solid State Anaerobic Digestion
AbstractSolid state anaerobic digestion is a safe and environmental friendly technology to dispose solid wastes, could produce methane and reduce the volume of wastes. Three biomass residues from palm oil mill plant including empty fruit bunches (EFB), palm press fiber (PPF) and decanter cake (DC) were evaluated for methane production by solid state anaerobic digestion. Oil palm biomass was mixed with inoculum at F/I ratio of 2:1, 3:1, 4:1, 5:1 and 6:1 based on the volatile solid (VS). Results show that among the five F/I ratios tested, the F/I ratio of 2:1 gave the highest methane yield and methane production for all biomass residues. The highest cumulative methane production of 2180 mLCH4 was obtained from EFB followed by PPF (1964mL CH4) and DC (1827mL CH4) at F:I ratio of 2:1. The highest methane yield of 144mL CH4/gVS was obtained from EFB followed by PPB (140mL CH4/gVS) and DC (130mL CH4/gVS) at F/I ratios of 2:1. Methane production from EFB, PPF and DC by SS-AD was 55, 47 and 41 m 3 CH4/ton, respectively. These results collectively suggested that EFB could be a promising substrate for methane production by SS-A
Biohythane Production from Organic Wastes by Two-Stage Anaerobic Fermentation Technology
The combination of biohydrogen and biomethane production from organic wastes via two-stage anaerobic fermentation could yield a biohythane gas with a composition of 10-15% H2, 50-55% CH4 and 30-40% CO2. Biohythane could be upgraded to biobased hythane by removing of CO2. The two-stage anaerobic fermentation process is based on the different function between acidogens and methanogens in physiology, nutrition needs, growth kinetics, and sensitivity to environmental conditions. In the first stage, the substrate is fermented to H2, CO2, volatile fatty acids (VFA), lactic acid and alcohols by acidogens with optimal pH of 5–6 and hydraulic retention time (HRT) of 1–3 days. In the second stage, the remaining VFA, lactic acid, and alcohols in the H2 effluent are converted to CH4 and CO2 by methanogens under optimal pH range of 7–8 and HRT of 10–15 days. The advantage of biohythane over traditional biogas are more environmentally, flexible of H2/CH4 ratio, higher energy recovery, higher degradation efficiency, shorter fermentation time, and high potential to use as vehicle fuel. This chapter outlines the general approach of biohythane production via two-stage anaerobic fermentation, principles, microorganisms, reactor configuration, process parameters, methods for improving productivity as well as technical challenges toward the scale-up process of biohythane process
Dilute Acid Pretreatment of Oil Palm Trunk Biomass at High Temperature for Enzymatic Hydrolysis
AbstractOld oil palm trunk (OPT) is available in large quantity in Southeast Asia and a potential lignocellulosic biomass resource for bioethanol production. Dilute acid (DA) pretreatment was applied to the old oil palm trunk for enzymatic saccharification. The pretreatment conditions were investigated through a fractional factorial experiment design. The pretreated substrates were analyzed for chemical composition, and their enzymatic digestibility was investigated and compared. The results indicated that the DA pretreatment was able to improve enzymatic hydrolysis by removing hemicelluloses from OPT. Mild pretreatment preserved more hemicellulose and cellulose in pretreated OPT, but severe pretreatment was necessary to achieve satisfactory enzymatic hydrolysis of OPT. For example, the DA pretreatment with 3% H2SO4 at 180°C for 40min could achieve an 80% enzymatic hydrolysis
Hydrodynamic characteristics and model of fluidized bed reactor with immobilized cells on activated carbon for biohydrogen production
A mathematical model of minimum fluidization velocity (Umf) was developed based on thehydrodynamic characteristics of the fluidized bed reactors (FBR) with immobilised cellsattached to activated carbon at thermophilic biohydrogen fermentation. The maximumhydrogen productivity rate of 7.8 mmolH2/L.h and hydrogen yield of 2.2 molH2/mol of sugarconsumed was obtained when the HRT was shortened from 48 h to 6 h. The presence of theimmobilised cells enriched the biomass composition in the FBR from 4.9 to 7.1 g VSS/L andmaximum energy generated was 58.7 KJ H2/L.d. The FBR had to be operated at a high Umfof0.05e0.44 cm/s and a low terminal velocity of 2.11 cm/s to prevent the immobilised cellsfrom washed out from the FBR, hence achieved an adequate fluidization system. Ascreening of the microbial population by DGGE revealed that theT. thermosaccharolyticumsp. was dominant for all the HRTs, thereby indicating that this bacterium is resilient to-wards environmental disturbances
Population genetic analysis of oceanic paddle crab (Varuna litterata) in Thailand
Population genetic structure of Varuna litterata living along the coast of Thailand were examined in this study. The samples were collected from 3 coastal regions: The Andaman sea (Satun, Trang, Phang Nga), the lower Gulf of Thailand (Pattani, Songkhla, Nakhon Si Thammarat) and the upper Gulf of Thailand (Petchburi, Samut Songkram, Rayong, Trat). Intraspecific variation was determined based on partial sequences of the cytochrome oxidase subunits I gene. A total of 182 samples were collected but only 32 haplotypes were obtained from these samples. An excess of rare haplotypes indicated that the female effective population size of V. litterata living along the coast of Thailand is large. Estimated values of haplotype diversity and nucleotide diversity were 0.790 and 0.003, respectively. The AMOVA (analysis of molecular variance) and phylogenetic analysis results showed that based on genetic variation, the population of this organism was found to have 2 genetically different populations: The Andaman sea population and the Gulf of Thailand population. Genetic exchange of V. litterata among populations inhabiting along the coast of Thailand could be described by the stepping stone model. The results of neutrality tests, both Tajima’s D and Fu’s Fs statistics, yielded negative values (-1.992 and -26.877, respectively) and statistically significant deviation from the neutrality, indicating that the V. litterata living along the Thailand coast had experienced population expansion. Mismatch distribution analysis indicated that a possible expansion occurred 211,428 years ago during the Pleistocene glaciations period
Effect of temperature and initial pH on biohydrogen production from palm oil mill effluent: long-term evaluation and microbial community analysis
Anaerobic sludge from palm oil mill effluent (POME) treatment plant was
used as a source of inocula for the conversion of POME into hydrogen.
Optimization of temperature and initial pH for biohydrogen production
from POME was investigated by response surface methodology. Temperature
of 60\ub0C and initial pHof 5.5 was optimized for anaerobic
microflora which gave a maximum hydrogen production of 4820 ml
H2/l-POME corresponding to hydrogen yield of 243 ml H2/g-sugar. Total
sugar consumption and chemical oxygen demand (COD) removal efficiency
were 98.7% and 46%, respectively. Long-term hydrogen production in
continuous reactor at HRT of 2 days, 1 day and 12 hrs were 4850 \ub1
90, 4660 \ub1 99 and 2590 \ub1 120 ml H2/l-POME, respectively.
Phylogenetic analysis of the mixed culture revealed that members
involved hydrogen producers in both batch and continuous reactors were
phylogenetically related to the Thermoanaerobacterium
thermosaccharolyticum . Batch reactor showed more diversity of
microorganisms than continuous reactor. Microbial community structure
of batch reactor was comprised of T. thermosaccharolyticum, T. bryantii
, Thermoanaerobacterium sp., Clostridium thermopalmarium and
Clostridium NS5-4, while continuous reactor was comprised of T.
thermosaccharolyticum, T. bryantii and Thermoanaerobacterium sp. POME
is good substrate for biohydrogen production under thermophilic
condition with Thermoanaerobacterium species play an important role in
hydrogen fermentation
Effects of volatile fatty acids in biohydrogen effluent on biohythane production from palm oil mill effluent under thermophilic condition
Background: Biohydrogen effluent contains a high concentration of
volatile fatty acid (VFA)mainly as butyric, acetic, lactic and
propionic acids. The presence of various VFAs (mixture VFAs) and their
cooperative effects on two-stage biohythane production need to be
further studied. The effect of VFA concentrations in biohydrogen
effluent of palm oil mill effluent (POME) on methane yield in methane
stage of biohythane production was investigated. Results: Themethane
yield obtained in low VFA loading (0.9 and 1.8 g/L) was 15\u201320%
times greater than that of high VFA loading (3.6 and 4.7 g/L). Butyric
acid at high concentrations (8 g/L) has the individual significantly
negative effect the methane production process (P < 0.05). Lactic,
acetic and butyric acid mixed with propionic acid at a concentration
higher than 0.5 g/L has an interaction significantly negative effect on
the methanogenesis process (P < 0.05). Inhibition condition had a
negative effect on both bacteria and archaea with inhibited on
Geobacillus sp., Thermoanaerobacterium thermosaccharolyticum ,
Methanoculleus thermophilus and Methanothermobacter delfuvii
resulting in low methane yield. Conclusion: Preventing the high
concentration of butyric acid, and propionic acid in the hydrogenic
effluent could enhance methane production in two-stage anaerobic
digestion for biohythane production
Chromosomal 16p microdeletion in Rubinstein-Taybi syndrome detected by oligonucleotide-based array comparative genomic hybridization: a case report
<p>Abstract</p> <p>Introduction</p> <p>Chromosomal aberrations of chromosome 16 are uncommon and submicroscopic deletions have rarely been reported. At present, a cytogenetic or molecular abnormality can only be detected in 55% of Rubinstein-Taybi syndrome patients, leaving the diagnosis in 45% of patients to rest on clinical features only. Interestingly, this microdeletion of 16 p13.3 was found in a young child with an unexplained syndromic condition due to an indistinct etiological diagnosis. To the best of our knowledge, no evidence of a microdeletion of 16 p13.3 with contiguous gene deletion, comprising cyclic adenosine monophosphate-response element-binding protein and tumor necrosis factor receptor-associated protein 1 genes, has been described in typical Rubinstein-Taybi syndrome.</p> <p>Case presentation</p> <p>We present the case of a three-year-old Malaysian Chinese girl with a <it>de novo </it>microdeletion on the short arm of chromosome 16, identified by oligonucleotide array-based comparative genomic hybridization. Our patient showed mild to moderate global developmental delay, facial dysmorphism, bilateral broad thumbs and great toes, a moderate size atrial septal defect, hypotonia and feeding difficulties. A routine chromosome analysis on 20 metaphase cells showed a normal 46, XX karyotype. Further investigation by high resolution array-based comparative genomic hybridization revealed a 120 kb microdeletion on chromosomal band 16 p13.3.</p> <p>Conclusion</p> <p>A mutation or abnormality in the cyclic adenosine monophosphate-response element-binding protein has previously been determined as a cause of Rubinstein-Taybi syndrome. However, microdeletion of 16 p13.3 comprising cyclic adenosine monophosphate-response element-binding protein and tumor necrosis factor receptor-associated protein 1 genes is a rare scenario in the pathogenesis of Rubinstein-Taybi syndrome. Additionally, due to insufficient coverage of the human genome by conventional techniques, clinically significant genomic imbalances may be undetected in unexplained syndromic conditions of young children. This case report demonstrates the ability of array-based comparative genomic hybridization to offer a genome-wide analysis at high resolution and provide information directly linked to the physical and genetic maps of the human genome. This will contribute to more accurate genetic counseling and provide further insight into the syndrome.</p
- …