Minimization of the stress concentration in Formed Parts through Non-Parametric Optimization

Parametric and non-parametric are the main optimization methods that are used in various industrial fields. In non-parametric optimization, the process of manipulating the node locations (shape optimization) or removing mass without changing the node locations (topology optimization) is adopted to achieve a desired objective. This structural optimization is formulated as a non-parametric problem, and for analysis purposes, ABAQUS/CAE software is adopted for this approach. Manufacturing process like forming is always linked with stress concentration, especially in the sharp ends and variable cross sections like holes and fillets. The problems of representation and finding the optimal and better structural design of some known quantities such as reactions, loads and masses is not easy. A large deflection may be induced in a structure when experiencing severe mechanical loads. In this work, the numerical method has been presented to investigate a method for optimization of formed parts geometry. Numerical examination confirmed that high-stress concentrations are generated in many places. Material distribution is highly influenced by nonlinearity and the new layout will result in intermediate densities. In such cases, the nonlinear elasticity like nonlinear strain must be considered. As a result, the non-parametric optimization can offer good design flexibility to use the existing model with ease of setup and without the need for parameterization. It can provide a conceptual design that can reduce the structure's weight to the maximum extent in the early design stage. This work is going to optimize the design of the formed plates by reducing the volume while maximizing its stiffness. As a recommendation, in order to provide an attractive approach with suitable levels of structural performance, the combination of both optimization methods is the short way to achieve this aim

Approach for testing the material behavior in roll forming in a small scale

Roll forming of ultra-high strength steels (UHSS) and other high strength alloys is an advanced manufacturing methodology with the ability of cold forming those materials to complex three-dimensional shapes for lightweight structural applications. Due to their high strength, most of these materials have a reduced ductility which excludes conventional sheet forming methods under cold forming conditions. Roll forming is possible due to its low strains and incremental forming characteristic. Recent research investigates the development of high strength nano-structured aluminum sheet and titanium alloys, as well as their behaviour in roll forming with regard to formability, material behaviour and shape defects. The development of new materials is often limited to small scale samples due to the high preparation costs. In contrast, industrial application needs larger scale tests for validation, especially in roll forming where a minimum sheet length is required to feed the sample trough the roll forming machine. This work describes a novel technique for studying roll forming of a short length of experimental material. DP780 steel strips (500mm &ndash; 1300mm length) were welded between two mild steel carrier sheets of similar width and thickness giving an overall strip length of 2m. Roll forming trials were performed and longitudinal edge strain, bow and springback determined on the welded samples and samples formed of full length DP780 strip before and after cut off. The experimental results of this work show that this method gives a reasonable approach for predicting material behavior in roll forming transverse to the rolling direction. In contrast to that significant differences in longitudinal bow were observed between the welded sections and the sections formed of full length DP780 strip; this indicates that the applicability of this method is limited with regard to predicting longitudinal material behavior in roll forming.<br /

Retinal Detachment in Down Syndrome: Characteristics and Surgical Outcomes

Purpose. To determine the functional and anatomic outcomes of rhegmatogenous retinal detachment (RRD) surgery in patients with Down syndrome. Methods. A retrospective chart review was performed of patients with Down syndrome who had undergone surgery for RRD at King Khalid Eye Specialist Hospital between 1995 and 2014. Results. A total of 245 patients with Down syndrome were evaluated during the study period. Eighteen eyes of 15 patients (6.1%) with RRD were identified. Three out of 15 patients (20%) presented with bilateral retinal detachment. All eyes presented with macula off retinal detachment. The retina was successfully reattached in 16/18 (88.8%) eyes after a mean follow-up of 48 months. The final postoperative visual acuity ranged from light perception to 20/125 (median: hand motion) (11/18 eyes). Conclusions. The anatomic success rate of retinal reattachment surgery in patients with Down syndrome is comparable to the general population. Patients with Down syndrome should undergo regular ophthalmic examinations for early diagnosis. Despite late diagnosis and the presence of proliferative vitreoretinopathy (PVR) in some patients, favorable anatomical outcomes can be achieved

Contrast sensitivity deficits in patients with mutation-proven inherited retinal degenerations

Abstract Background Patients with retinal diseases frequently complain of poor visual function even when visual acuity is relatively unaffected. This clinical finding has been attributed to deficits in contrast sensitivity (CS). The purpose of our study was to evaluate the CS in patients with clinical and genetic diagnosis of inherited retinal degeneration (IRD) and relatively preserved visual acuity. Methods Seventeen patients (30 eyes) with IRD and visual acuity of 20/40 or better, and 18 controls (18 eyes) without any ocular condition underwent slit lamp examination, visual acuity testing via standard Snellen chart testing, CS testing via the Quick Contrast Sensitivity Function (QCSF), and Spectral Domain Optical Coherence Tomography (SD-OCT). CS were measured at 1.0, 1.5, 3.0, 6.0, 12.0, and 18.0 cycles per degree (cpd). T tests with general estimated equations were used to compare CS between groups. Wald chi square followed by pairwise comparisons was used to compare CS between multiple groups. Results We included 12 patients with rod-cone dystrophy (RCD), 3 patients with Stargardt disease (STGD) and 2 patients with Best disease. Patients with IRD had significantly worse CS than controls (p < 0.001) in all spatial frequencies. Patients with STGD had more marked deficits in CS than patients with Best disease (p < 0.001) and RCD (p < 0.001) despite having similar visual acuities. Conclusion Patients with IRD, especially patients with STGD with relatively preserved visual acuity have marked deficits in CS when measured across a range of spatial frequencies. We recommend that clinical trials for STGD incorporate CS measured over a range of spatial frequencies as a secondary clinical endpoint for monitoring visual function. CS may provide an explanation for complaints of visual dysfunction when visual acuity is not significantly altered.https://deepblue.lib.umich.edu/bitstream/2027.42/146723/1/12886_2018_Article_982.pd

Electrical performance of efficient quad-crescent-shaped Si nanowire solar cell

The electrical characteristics of quad-crescent-shaped silicon nanowire (NW) solar cells (SCs) are numerically analyzed and as a result their performance optimized. The structure discussed consists of four crescents, forming a cavity that permits multiple light scattering with high trapping between the NWs. Additionally, new modes strongly coupled to the incident light are generated along the NWs. As a result, the optical absorption has been increased over a large portion of light wavelengths and hence the power conversion efficiency (PCE) has been improved. The electron–hole (e–h) generation rate in the design reported has been calculated using the 3D finite difference time domain method. Further, the electrical performance of the SC reported has been investigated through the finite element method, using the Lumerical charge software package. In this investigation, the axial and core–shell junctions were analyzed looking at the reported crescent and, as well, conventional NW designs. Additionally, the doping concentration and NW-junction position were studied in this design proposed, as well as the carrier-recombination-and-lifetime effects. This study has revealed that the high back surface field layer used improves the conversion efficiency by ∼ 80%. Moreover, conserving the NW radial shell as a low thickness layer can efficiently reduce the NW sidewall recombination effect. The PCE and short circuit current were determined to be equal to 18.5% and 33.8 mA/cm$^{2}$ for the axial junction proposed. However, the core–shell junction shows figures of 19% and 34.9 mA/cm$^{2}$. The suggested crescent design offers an enhancement of 23% compared to the conventional NW, for both junctions. For a practical surface recombination velocity of 10$^{2}$ cm/s, the PCE of the proposed design, in the axial junction, has been reduced to 16.6%, with a reduction of 11%. However, the core–shell junction achieves PCE of 18.7%, with a slight reduction of 1.6%. Therefore, the optoelectronic performance of the core–shell junction was marginally affected by the NW surface recombination, compared to the axial junction

Nephroprotective Role of Combined Sitagliptin and Oleuropein in Cisplatin-Induced Acute Kidney Injury: Regulation of SDF-1α/Nrf2/ HO-1 Axis and Autophagy

Background: Accumulating evidence proves that cisplatin, a widely used anticancer, causes acute kidney injury (AKI). Sitagliptin (Sita), a dipeptidyl peptidase-4 (DPP4) inhibitor, is a hypoglycemic agent that can promote tissue angiogenesis and cell survival. However, little is known about the nephroprotective effect of Sita in cisplatin-induced AKI especially its effect on SDF-1α, usually degraded by DPP4. Meanwhile, the olive oil component oleuropein (Ole) activates Nrf2/heme oxygenase-1 (HO-1) axis, which ultimately leads to SDF-1α activation. Herein, we studied the nephroprotective effects of combined Sita and Ole on oxidative stress and autophagy through SDF-1α/Nrf2/ HO-1 axis in cisplatin-induced AKI in rats. Methods: AKI was induced in vivo through single IP injection of cisplatin (7 mg/kg), while Sita (10 mg/kg) and Ole (16 mg/kg) were given separately and in combination for 7 days prior and 5 days after cisplatin injection. AKI was assessed through histopathological examination, measurement of serum creatinine and urea. Also, serum GLP-1, serum and kidney SDF-1α levels were measured by ELISA. LC3-II, P62, HO-1, Nrf2, and caspase-3 were investigated by western blotting. Results: Sita and Ole monotherapy and in combination accelerated kidney recovery as they suppress serum SDF-1α, serum BUN, creatinine and renal histopathological features. Each of Sita and Ole enhanced Nrf2/HO-1axis in renal tissues while only Sita enhanced renal SDF-1α. Sita and Ole monotherapy showed incompetent autophagy where the late steps of autophagy were incomplete. Combined treatment enhanced SDF-1α in kidney tissue which showed recovery through autophagy process. Conclusion: Sita and Ole show promising nephroprotective effects in cisplatin-induced AK

Nonplanar Integrability and Parity in ABJ Theory

In this article we study the action of the non-planar two-loop dilatation operator in an SU(2)*SU(2) sub-sector of the ABJ Chern-Simons-matter theory. The gauge invariant operators we consider are the restricted Schur polynomials. As in ABJM theory, there is a limit in which the spectrum reduces to a set of decoupled harmonic oscillators, indicating integrability in the large M and N double limit of the theory. We then consider parity transformations on the gauge invariant operators. In this case the non-planar anomalous dimensions break parity invariance. Our analysis shows that (M-N) is related to the holonomy in the string theory, confirming one of the main features of the theory and its string dual. Furthermore, in the limit where ABJ theory reduces to ABJM theory, parity invariance is restored.Comment: 1+12 pages, Corrected typos, more clarifications, figure and appendix adde

Cytotoxic activity of Thymus capitatus collected from Hail region in Saudi Arabia with mechanistic study via induction of caspase-dependent apoptosis and S-phase arrest

Thymus capitatus is a plant grows in Mediterranean area and some Arab countries such as Saudi Arabia. It possesses numerous medicinal values. Its common name is Zaatar and it belongs to family Lamiaceae Thymus capitatus leaves and stem were collected from Hail region, Saudi Arabia. Then both leaves and stem were extracted with ethanol. This study was performed to evaluate cytotoxic activity of Thymus capitatus leaves and stem ethanolic extract in details. Doxorubicin was used as a standard and the relevant half maximal inhibitory concentration (IC50) values were computed for each cell line by 3-(4,5- diemthylthiazole-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay. In addition, further mechanistic study was carried out by using Apoptosis assay to explore cytotoxic activity of plant extract. Both leaves and stems extracts were screened against HepG2, A-549, HCT-116 and   MCF-7 cancer cell lines. It was found that leaves’ extract shows high and moderate cytotoxic activity against both A-549 and HepG2 cancer cell lines, respectively (with IC50 = 13.6 and 21.5 μg/ml, respectively), while stem’s extract exerted moderate cytotoxic activity against A-549 cancer cell lines (with IC50 = 21.38 μg/ml).  Further mechanistic study was carried out on A-549 cells by using apoptosis assay. It showed that leaves’ extract resulted in arrest of S-phase and caused apoptosis through activation of caspase-3, p53 and Bax, in addition to down regulation of Bcl-2